-
{{News_brief_end|Jun 1, 2015| hipboi |[[News | News]]|[https://radxa.com/Rock/Hdmi_Resolution Read
|https://radxa.com/mw/images/1/1b/Radxa_oshw.png
13 KB (1,982 words) - 03:48, 24 November 2022
-
1) Not enter the loader mode (refer to [[Rock/Loader_mode | [rock loader mode
DDR Version 1.04 20130517 In DDR3 300MHz Bus Width=32 Col=10 Bank=8 Row=15 CS=2 Die Bus-W
15 KB (2,397 words) - 02:37, 16 August 2023
-
1: Make sure what your board vision is, refer to [[Rock/hardware_revision |
4 KB (557 words) - 14:50, 21 October 2014
-
subprocess installed post-installation script returned error exit status 1
4 KB (524 words) - 11:25, 21 January 2015
-
LoUU:2 LoC:1 LoUIS:2
Cache level 1:
5 KB (821 words) - 12:05, 30 May 2014
-
==== Option 1: Install with RK_DriverAssitant tools ====
==== Option 1: Quick Install ====
4 KB (590 words) - 03:09, 17 September 2021
-
{| class="wikitable" border="1"
2 KB (302 words) - 07:24, 27 December 2013
-
Wired connection 1 413fdf5a-27bf-4f88-93c5-a4da394e20ce 802-3-ethernet Tue 15 Apr
8 KB (1,131 words) - 03:15, 29 September 2022
-
! 1
! 1
5 KB (632 words) - 04:13, 6 January 2015
-
{| class="wikitable" border="1"
<td>Android lollipop 5.1 </td>
9 KB (1,085 words) - 03:47, 8 January 2020
-
1、Add an array as follow:
ddata->scanData <<= 1;
5 KB (557 words) - 04:18, 6 January 2015
-
git clone -b stable --depth 1 git://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git
3 KB (489 words) - 03:13, 29 September 2022
-
1、增加一个数组
ddata->scanData <<= 1;
4 KB (216 words) - 11:10, 9 February 2014
-
:1. 从我们的git服务器上获取,参考wiki [[Rock/Android_Build#Get_the_
2 KB (193 words) - 15:09, 19 February 2014
-
DevNo=1 Vid=0x2207,Pid=0x310b,LocationID=21f '''Maskrom'''
Found 1 rockusb,Select input DevNo,Rescan press <R>,Quit press <Q>:1
1 KB (237 words) - 04:21, 6 January 2015
-
#RECOVER_KEY: 1,1,0,20,0
1 KB (199 words) - 05:26, 6 January 2015
-
[ -x /bin/fbset ] && /bin/fbset -a -nonstd 1 -depth 32 -rgba "8/0,8/8,8/16,8/24"
echo 1 > /sys/class/display/HDMI/enable
4 KB (662 words) - 05:22, 6 January 2015
-
speaker-test 1.0.25
1 - Front Right
2 KB (332 words) - 05:22, 6 January 2015
-
1. update.img for SD boot
1. Download the tool to make upgrade disk and unzip it
1 KB (183 words) - 05:35, 6 January 2015
-
git clone -b kitkat-release --depth 1 https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-e
git clone -b jb-release --depth 1 https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-e
3 KB (286 words) - 09:19, 17 July 2015
-
1. Power off the RR
2 KB (400 words) - 19:03, 12 January 2015
-
New 'X' desktop is radxa:1
Log file is /root/.vnc/radxa:1.log
3 KB (393 words) - 05:25, 6 January 2015
-
New 'X' desktop is radxa:1
Log file is /root/.vnc/radxa:1.log
3 KB (186 words) - 01:46, 28 March 2014
-
subprocess installed post-installation script returned error exit status 1
3 KB (376 words) - 04:39, 29 March 2014
-
1. 通过 sudo apt-get -y install libusb-1.0-0-dev来安装 libusb.h
gcc -o rkflashtool rkflashtool.c -I/usr/include/libusb-1.0/ -lusb-1.0 -O2 -W -Wall
1 KB (95 words) - 04:56, 29 March 2014
-
speaker-test 1.0.25
1 - Front Right
2 KB (151 words) - 08:55, 2 April 2014
-
et. 1 sector 2 <br>
16 KB (1,612 words) - 08:09, 23 August 2022
-
<td colspan="2" class="text-center">ARM Cortex-A9 quad core @ 1.6Ghz</td>
<td colspan="2" class="text-center">HDMI 1.4 up to 1080p@60hz</td>
4 KB (397 words) - 03:00, 29 September 2022
-
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}/zh_cn|{{#language:zh-cn}}]]</div>
3 KB (304 words) - 03:18, 9 November 2018
-
<li><strong>1 x </strong>OTG, <strong>3 x </strong>host</li>
<li><strong>1 x </strong>OTG, <strong>2 x </strong>host</li>
6 KB (665 words) - 03:01, 29 September 2022
-
{{News_brief_end|Jun 1, 2015| hipboi |[[News | News]]|[http://radxa.com/Rock/Hdmi_Resolution Read
|http://radxa.com/mw/images/1/1b/Radxa_oshw.png
14 KB (2,263 words) - 07:03, 8 December 2019
-
return 1;
return 1;
6 KB (907 words) - 09:05, 16 June 2015
-
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}/zh_cn|{{#language:zh-cn}}]]</div>
2 KB (320 words) - 13:36, 20 June 2023
-
<td colspan="2">ARM Cortex-A9 quad core @ 1.6Ghz</td>
<td colspan="2">HDMI 1.4 up to 1080p@60hz</td>
5 KB (555 words) - 05:39, 23 September 2014
-
HIGH -> 1
OUPTUT -> 1
2 KB (344 words) - 10:36, 17 October 2014
-
1.) get the radxa workspace
2 KB (280 words) - 12:36, 20 October 2014
-
Version 1.0
For version 1.0
2 KB (251 words) - 16:26, 20 November 2015
-
* '''1.''' Plug in the power cable to DC jack and power adapter, plug in OTG USB c
...et button, after release the reset button, hold the tweezer connection for 1 second. In RKBatchTool the square icon should now show up '''blue''' (if it
2 KB (273 words) - 10:38, 19 October 2015
-
sudo dd if=/dev/zero of=/dev/sdx bs=1M count=1
1
2 KB (354 words) - 03:39, 27 April 2015
-
1.1 Compile hostapd
wget http://dl.radxa.com/rock/source/RTL8723A_WiFi_linux_v4.1.7_8023_BTCOEX20130528_ver3.3_beta.rar
4 KB (520 words) - 01:57, 23 February 2015
-
1
2 KB (274 words) - 04:20, 6 January 2015
-
1 Download Pilight code
1 KB (167 words) - 07:13, 6 January 2015
-
git clone -b kitkat-release --depth 1 https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-e
git clone -b jb-release --depth 1 https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-e
1 KB (180 words) - 05:53, 21 March 2015
-
{{News_brief_end|Jun 1, 2015| hipboi |[[News | News]]|[https://radxa.com/Rock/Hdmi_Resolution Read
|https://radxa.com/mw/images/1/1b/Radxa_oshw.png
11 KB (1,684 words) - 02:12, 5 December 2018
-
*Radxa Rock Lite: 1 GB Mémoire Vive - Systeme d'exploitation sur Carte Micro-SD seulement - Wi
...d'un puissant processeur ARM '''Rockchips rk3188''' a 4 coeurs cadencé a 1.6ghz ainsi qu'une puissante carte graphique a 4 coeurs de type '''Mali-400-
1 KB (198 words) - 03:02, 29 September 2022
-
1 change user to root
dhcp-option=3,192.168.2.1 #configure the server
1 KB (155 words) - 12:43, 9 July 2015
-
* rock2 SoM x 1
* square base board x 1
2 KB (417 words) - 14:20, 16 June 2015
-
# short press and release(for 1 second) '''reset''' key(the one near '''wifi antenna''')
2 KB (270 words) - 08:17, 16 June 2015
-
1) the method is suit for rock pro, rock lite & rock2 square
'''Step 1: Get the EDID parameter by tools'''
4 KB (639 words) - 07:27, 1 June 2015
-
1 Tested module
...dule power supply pins VCC GND connect to pro/lite extend port J8 pins 2 1.
710 B (116 words) - 02:05, 4 June 2015
-
! 1
! 1
4 KB (557 words) - 08:06, 3 June 2015
-
''' while(1) {'''
''' sleep(1);'''
10 KB (1,333 words) - 11:47, 7 August 2015
-
'''1)''' Download firmware and source code
(The demo is writen by AndroidStudio 1.3.2) the run the apk on your rock pro
1 KB (166 words) - 12:15, 4 December 2015
-
* Powerful CPU(quad core ARM Cortex-A9 up to 1.6Ghz)
* Display via TTL, LVDS, HDMI 1.4a, AV out
2 KB (310 words) - 06:18, 26 November 2018
-
* 1. Power off the board
...and hold the Maskrom key if your board is Plus version with soldered eMMC (1: Reset 2: Maskrom 3: Recovery)
6 KB (941 words) - 07:50, 14 January 2023
-
...d Internal SRAM. It has a level 1 (L1) cache and a level 2 (L2). For level 1 cache, 48KB Icache and 32KB Dcache is for each A72. 32KB Icache and 32KB Dc
| 1 || VCC_CAM
10 KB (1,508 words) - 03:03, 29 September 2022
-
====Step 1: Requirements ====
1. Insert the uSD Card into uSD Card Reader, which connects to host computer.
2 KB (271 words) - 03:14, 12 June 2022
-
=== Option 1: With PC and eMMC module & adapter ===
1 Plug and click the eMMC module to the eMMC to uSD breakout board, plug the
5 KB (863 words) - 06:22, 20 February 2023
-
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}/zh_cn|{{#language:zh-cn}}]]</div>
3 KB (404 words) - 03:05, 9 November 2018
-
== Option 1: with NVME to USB3.0 reader or PC with NVME slot==
* Run the application. For example double click balenaEtcher-1.5.116-x64.AppImage on Ubuntu 20.04:
3 KB (504 words) - 20:36, 1 February 2023
-
...uales dos son Cortex-A72 a 1.8GHz y los cuatro restantes son Cortex-A53 a 1.4GHz, tiene como unidad gráfica una Mali T860MP4 (GPU) y una SRAM interna.
| 1 || VCC_CAM
12 KB (1,735 words) - 03:24, 29 September 2022
-
...2A, 12V/2A, 15V/2A y20V/2A. Además, Pi soporta QC 3.0/2.0 de 9V/2A y 12V/1.5A.
! colspan="1" width=42% | ROCK PI 4 Modelo A
8 KB (1,343 words) - 03:24, 29 September 2022
-
==== Paso 1: Requisitos ====
1. Inserta la tarjeta uSD en el lector de tarjetas uSD del ordenador.
3 KB (445 words) - 17:02, 9 February 2019
-
====Paso 1: Requisitos ====
3.1 Conecta la memoria eMMC en el adaptador eMMC a microSD y este al lector de
3 KB (403 words) - 17:02, 9 February 2019
-
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}/zh_cn|{{#language:zh-cn}}]]</div>
5 KB (782 words) - 17:12, 9 February 2019
-
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
====== Paso 1: Asegúrate que rkdeveloptool está instalado en tu ordenador ======
5 KB (785 words) - 16:57, 9 February 2019
-
{| class="wikitable" border="1"
{| class="wikitable" border="1"
7 KB (1,223 words) - 03:12, 29 September 2022
-
===
1. Nav Bar===
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
4 KB (657 words) - 08:26, 26 March 2020
-
1. Use upgrade_tool on Linux. [[ Android/upgrage_tool | Configuration upgrade
1. Use AndroidTool on Windows. [[ Android/android_tool | Using AndroidTool. ]
2 KB (335 words) - 02:19, 26 April 2020
-
...Pi 4 vem em dois modelos, Modelo A e Modelo B, cada modelo tem opções de 1 GB, 2 GB ou 4 GB de RAM. Para ver as diferenças detalhada do Modelo A e Mo
7 KB (904 words) - 03:12, 29 September 2022
-
.../2A und 20V/2A. Außerdem unterstützt der Pi QC 3.0/2.0 mit 9V/2A und 12V/1.5A.
! colspan="1" width=42% | ROCK PI 4 Model A
7 KB (1,102 words) - 03:12, 29 September 2022
-
...m SRAM. Es hat einen Level 1 (L1) Cache und einen Level 2 (L2). Für Level 1 Cache sind 48KB Icache und 32KB Dcache für jedes A72. 32KB Icache und 32KB
| 1 || VCC_CAM
12 KB (1,653 words) - 03:12, 29 September 2022
-
{| class="wikitable" border="1".
{| class="wikitable" border="1".
6 KB (950 words) - 16:18, 29 November 2018
-
.../2A und 20V/2A. Außerdem unterstützt der Pi QC 3.0/2.0 mit 9V/2A und 12V/1.5A.
! colspan="1" width=42% | ROCK PI 4 Model A
7 KB (1,102 words) - 03:05, 29 September 2022
-
{| class="wikitable" border="1".
{| class="wikitable" border="1".
6 KB (956 words) - 12:03, 30 November 2018
-
===
1. Nav Bar===
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
5 KB (653 words) - 11:58, 30 November 2018
-
===
1. Nav Bar===
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
4 KB (697 words) - 23:55, 30 November 2018
-
...2A, 15V/2A e 20V/2A. Além disso, o Pi suporta QC 3.0/2.0 com 9V/2A e 12V/1.5A.
! colspan="1" width=42% | ROCK PI 4 Model A
7 KB (1,166 words) - 03:06, 29 September 2022
-
{| class="wikitable" border="1"
{| class="wikitable" border="1"
5 KB (974 words) - 02:13, 8 December 2018
-
{| class="wikitable" border="1"
<td>Android lollipop 5.1 </td>
9 KB (1,089 words) - 15:55, 5 December 2018
-
# 1 mm a mais de espaço entre o conector HDMI e SPDIF
4 KB (715 words) - 17:22, 5 December 2018
-
{{News_brief_end|Jun 1, 2015| hipboi |[[News | News]]|[https://radxa.com/Rock/Hdmi_Resolution Read
|https://radxa.com/mw/images/1/1b/Radxa_oshw.png
13 KB (2,045 words) - 03:13, 22 June 2019
-
et. 1 sector 2 <br>
11 KB (1,157 words) - 18:38, 7 December 2018
-
$ ~/bin/repo init -u https://github.com/radxa/rockpi4-android-tv-7.1.git -m rockchip_tv_nougat_release.xml
# mmc 1 is your tf card
5 KB (638 words) - 17:00, 9 February 2019
-
{{News_brief_end|Jun 1, 2015| hipboi |[[News | News]]|[https://radxa.com/Rock/Hdmi_Resolution Leer
|https://radxa.com/mw/images/1/1b/Radxa_oshw.png
14 KB (2,143 words) - 17:30, 2 August 2020
-
..., tem um cache de nível 1 (L1) e um nível 2 (L2). Para o cache de nível 1, o Icache de 48 KB e o Dcache de 32 KB são para cada A72. 32KB Icache e 32
| 1 || VCC_CAM
11 KB (1,706 words) - 03:11, 29 September 2022
-
[714332.981224] usb 1-2: USB disconnect, device number 4
[714332.981402] cdc_ether 1-2:1.0 enp0s20f0u2: unregister 'cdc_ether' usb-0000:00:14.0-2, CDC Ethernet Devi
4 KB (530 words) - 10:15, 14 April 2020
-
4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.107356 s, 39.1 MB/s
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.140072 s, 7.5 MB/s
82 KB (9,031 words) - 18:24, 2 March 2022
-
{{News_brief_end|Jun 1, 2015| hipboi |[[News | News]]|[http://radxa.com/Rock/Hdmi_Resolution Read
|http://radxa.com/mw/images/1/1b/Radxa_oshw.png
13 KB (2,113 words) - 03:26, 29 September 2022
-
...Función 2 || Función 1 || GPIO || Pin# || || Pin# || GPIO || Función 1 || Función 2 || Número GPIO
| || || +3.3V || || style="background:yellow"| 1 || ||style="background:red"| 2 || || +5.0V || ||
5 KB (591 words) - 11:33, 23 March 2019
-
[714332.981224] usb 1-2: USB disconnect, device number 4
[714332.981402] cdc_ether 1-2:1.0 enp0s20f0u2: unregister 'cdc_ether' usb-0000:00:14.0-2, CDC Ethernet Devi
3 KB (534 words) - 16:58, 9 February 2019
-
gstreamer1.0-rockchip1-extra_20180115-1
gstreamer1.0-rockchip1-extra_20180115-1
3 KB (380 words) - 13:49, 15 March 2019
-
<li><strong>1 x </strong>OTG, <strong>3 x </strong>host</li>
<li><strong>1 x </strong>OTG, <strong>2 x </strong>host</li>
6 KB (685 words) - 03:26, 29 September 2022
-
...CK Pi 4 is 1500000(1.5Mbps), please check if your USB to TTL cable support 1.5Mbps baudrate. Some model of [https://www.silabs.com/products/interface/us
...the serial tool on macOS platform can not support custom baudrate such as 1.5Mbps due to driver restriction. If you know how to set custom baudrate on
7 KB (1,032 words) - 08:27, 11 November 2022
-
...ROCK Pi 4 es de 1500000(1.5Mbps), comprueba que tu cable USB a TTL soporte 1.5Mbps. Algunos modelos [https://www.silabs.com/products/interface/usb-bridg
...ie de la plataforma macOS no soporta el ajuste personalizado de baudios de 1.5Mbps debido a una restricción en el controlador. Si sabes como establecer
5 KB (690 words) - 16:59, 9 February 2019
-
et. 1 sector 2 <br>
10 KB (975 words) - 00:26, 3 January 2019
-
...,187,1) 0%, rgba(252,205,77,1) 54%, rgba(248,181,0,1) 58%, rgba(255,194,38,1) 100%);">
et. 1 sector 2 <br>
14 KB (1,465 words) - 03:13, 28 December 2021
-
'''Paso 1'''
2 KB (356 words) - 17:09, 9 February 2019
-
==== Option 1: Serial console ====
BD Address: AD:B8:A0:DA:A3:27 ACL MTU: 1021:8 SCO MTU: 64:1
12 KB (1,584 words) - 03:18, 29 September 2022
-
==== Opción 1: Compilación Manual ====
'4.0.1'
3 KB (482 words) - 17:07, 9 February 2019
-
=== Step 1: Get Ubuntu running on ROCK Pi 4 ===
...cv.org/releases.html here]]. As of writing this, the latest release is 4.0.1. For the newer version, just replace the link for the source code zip file.
4 KB (502 words) - 12:38, 7 January 2019
-
== Compile OpenCV (4.0.1)==
=== Step 1: Get Ubuntu running on ROCK Pi 4===
14 KB (1,574 words) - 07:27, 18 July 2022
-
=== Paso 1: Hacer que Ubuntu funcione en el ROCK Pi 4===
...pencv.org/releases.html aquí]]. A día de hoy, la última versión es 4.0.1. Para una nueva versión, sustituye el enlace por el nombre del fichero del
4 KB (549 words) - 17:00, 9 February 2019
-
====Passo 1: Requisitos ====
3.1 Conecte e clique no módulo eMMC no eMMC para a placa breakout do uSD, cone
2 KB (400 words) - 18:57, 16 June 2019
-
Info: Overlay for activation of 1-wire on GPIO4_D6 for devices
=====Example for 1-wire communication: DS18B20=====
8 KB (1,303 words) - 06:21, 6 December 2022
-
=== 1. Vorbereiten ===
[[File:etcher-rock-5b-1.png]]
8 KB (1,202 words) - 19:25, 9 September 2023
-
# 1. check the name.dtbo in /boot/overlays
3 KB (544 words) - 09:59, 16 March 2019
-
# 1. comprobar el nombre.dtbo en /boot/overlays
4 KB (608 words) - 19:04, 19 March 2019
-
1 SPI:
PIN19 SPI'''1'''_MOSI
10 KB (1,425 words) - 19:47, 19 March 2019
-
dd if=/dev/zero of=/dev/mmcblk1 bs=1G count=1 oflag=direct
dd if=/dev/mmcblk1 of=/dev/null bs=1G count=1
3 KB (493 words) - 12:54, 27 December 2021
-
dd if=/dev/zero of=/dev/mmcblk1 bs=1G count=1 oflag=direct
dd if=/dev/mmcblk1 of=/dev/null bs=1G count=1
3 KB (514 words) - 11:15, 23 March 2019
-
dd if=/dev/zero of=/dev/mmcblk1 bs=1G count=1 oflag=direct
dd if=/dev/mmcblk1 of=/dev/null bs=1G count=1
3 KB (492 words) - 19:30, 23 March 2019
-
=== 1 Unminimize the system ===
Mar 23 19:35:31 linux systemd[1]: Started Docker Application Container Engine.
3 KB (328 words) - 03:49, 17 March 2020
-
# 1. check the name.dtbo in /boot/overlays
4 KB (611 words) - 05:03, 31 March 2019
-
==1. Instalación ==
Mar 23 19:35:31 linux systemd[1]: Started Docker Application Container Engine.
3 KB (335 words) - 05:03, 4 April 2019
-
tmpfs 88432 284 88148 1% /run
tmpfs 88432 284 88148 1% /run
5 KB (944 words) - 05:18, 9 April 2019
-
==== Case 1: Empty SPI flash ====
DevNo=1 Vid=0x2207,Pid=0x330c,LocationID=305 Maskrom
7 KB (1,125 words) - 03:28, 13 April 2023
-
==== Option 1: USB access(adb) ====
Note: You can also get the IP of ROCK Pi S from option 1 or option 2 if you can not access network administrator page.
13 KB (1,844 words) - 03:27, 29 September 2022
-
| 1 | 32KB | loader1 | First stage loader |
988 B (105 words) - 03:58, 22 May 2019
-
| 1 | 32KB | loader1 | Cargador de primera etapa |
1 KB (126 words) - 11:04, 25 May 2019
-
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
..../configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
4 KB (682 words) - 11:17, 25 May 2019
-
ROCK Pi 4 is officially supported in mainline kernel since v5.1 thanks to developer Akash Gajjar from Mentor. Below is how to build it on a
...components/toolchain/binaries/7.3-2018.05/aarch64-linux-gnu/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz
5 KB (803 words) - 12:09, 18 September 2021
-
* LPDDR4 for 1/2/4GB ram
* Three buttons are soldered by default.(1: Maskrom 2: Reset 3: Recovery) See [[https://wiki.radxa.com/File:Rockpi4bpl
3 KB (471 words) - 11:36, 5 May 2023
-
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
..../configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
5 KB (726 words) - 19:36, 16 June 2019
-
=== 1. ROCK PI V1.4 ===
https://i.ibb.co/ySRFhLG/rockpi-poe-1.jpg
5 KB (802 words) - 03:28, 29 September 2022
-
* LPDDR4 para 1/2/4GB de RAM
1 KB (219 words) - 02:23, 22 June 2019
-
=== 1. ROCK PI V1.4 ===
https://i.ibb.co/ySRFhLG/rockpi-poe-1.jpg
5 KB (895 words) - 03:28, 29 September 2022
-
| 1 | 32KB | loader1 | First stage loader |
1,000 B (112 words) - 03:31, 22 June 2019
-
! colspan="1" | ROCK Pi S
...RK3308B <br />Quad Cortex-A35 ARM 64bits processor <br /> frequency up to 1.0GHz
7 KB (1,195 words) - 07:21, 8 December 2023
-
...u may power ROCK Pi S by putting DV +5V directly to PIN#2 of 26-PIN HEADER 1. GND pin like PIN#6 is also need.
PoE connector is divided into two groups, Group 1 (PIN#1 and PIN#2) and Group2 (PIN#3 and PIN#4) .
6 KB (935 words) - 03:29, 29 September 2022
-
=== Hardware V1.0/V1.1 ===
vms@vms-ROCK-Pi-X:~$ sudo mraa-gpio set 7 1 //pin40 pull high
7 KB (1,084 words) - 07:42, 10 May 2022
-
...utilizar o OpenCV. Um criar manualmente o OpenCV por você mesmo (Opção 1) e o outro está instalando o pacote opencv4.0 (Opção 2).
==== Opção 1: criar manualmente ====
4 KB (468 words) - 21:53, 22 June 2019
-
==1 Instalação ==
Mar 23 19:35:31 linux systemd[1]: Started Docker Application Container Engine.
3 KB (334 words) - 22:06, 22 June 2019
-
1. By default, the ROCK Pi S uses the colorful 26PIN GPIO header PIN8 and PIN
2. The USB to TTL chip must support 1.5Mbps baud rate, some cheap USB to TTL chip can not support such high baud
721 B (103 words) - 02:49, 1 June 2020
-
1. Insert the uSD Card into uSD Card Reader, which connects to host computer.
$ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
2 KB (273 words) - 03:33, 25 June 2019
-
...CK Pi S is 1500000(1.5Mbps), please check if your USB to TTL cable support 1.5Mbps baudrate. Some model of [https://www.silabs.com/products/interface/us
...the serial tool on macOS platform can not support custom baudrate such as 1.5Mbps due to driver restriction. If you know how to set custom baudrate on
5 KB (718 words) - 09:35, 29 January 2022
-
1. Insert the uSD Card into uSD Card Reader, which connects to host computer.
$ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
2 KB (273 words) - 01:36, 20 November 2019
-
==== 26-pin Header 1 ====
| || || || || +3.3V || style="background:yellow"| 1 || ||style="background:red"| 2 || +5.0V || || ||| ||
21 KB (2,699 words) - 01:49, 21 September 2022
-
| 1 | 32KB | loader1 | First stage loader |
| 1 | 16MB | boot | Kernel partition, bootable |
2 KB (176 words) - 07:55, 31 December 2019
-
==== 26-pin Header 1 ====
| || || || +3.3V || || style="background:yellow"| 1 || ||style="background:red"| 2 || +5.0V || || ||| ||
9 KB (1,063 words) - 09:35, 28 June 2019
-
==== Step 1 ====
777 B (105 words) - 13:34, 3 July 2019
-
* ROCK Pi E V1.1 or later
Step 1: Add the following line to file '''/boot/uEnv.txt'''.
2 KB (389 words) - 06:15, 24 September 2021
-
PIN3 I2C'''1'''_SCL
PIN5 I2C'''1'''_SDA
13 KB (1,919 words) - 09:52, 2 August 2022
-
=====Step 1: Modifying configuration files.=====
...35b-v2 # Waveshare 3.5inch RPI LCD Model B V2.0 on SPI2 for ROCK Pi S V1.1
3 KB (452 words) - 05:11, 30 March 2020
-
== Step 1 Install ROCK Pi 4 u-boot image to SPI Flash ==
4194304 bytes (4.2 MB, 4.0 MiB) copied, 0.107356 s, 39.1 MB/s
13 KB (2,169 words) - 06:40, 12 June 2023
-
===== Step 1: Get the source code =====
===== Method 1: Flash U-Boot to eMMC module =====
4 KB (650 words) - 02:55, 25 February 2020
-
{| class="wikitable" border="1"
* KINGSTON A2000 1 TB (SA2000M81000G) (not tested with SPI boot) = Silicon Motion SM2263ENG
9 KB (1,459 words) - 10:08, 20 December 2022
-
sudo vncserver -kill :1 #Kill the vncserver process
vncviewer <IP address of ROCK Pi 4>:1
2 KB (245 words) - 05:59, 8 February 2020
-
[714332.981224] usb 1-2: USB disconnect, device number 4
[714332.981402] cdc_ether 1-2:1.0 enp0s20f0u2: unregister 'cdc_ether' usb-0000:00:14.0-2, CDC Ethernet Devi
3 KB (509 words) - 15:19, 21 July 2019
-
1. RkUpdate Image
vbmeta 155648 157695 1.000000 MB
8 KB (948 words) - 09:31, 28 February 2020
-
* High speed USB3.1 Gen2 GL3227E controller
544+1 records in
1 KB (173 words) - 06:40, 25 July 2019
-
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/lib/aarch64-linux-gnu/gstreamer-1.0
.../dev/video0 ! video/x-raw,format=NV12,width=1920,height=1080, framerate=30/1 ! xvimagesink
1 KB (177 words) - 02:14, 2 March 2023
-
sudo vncserver -kill :1 # Mata el proceso del vncserver
vncviewer 'dirección IP del ROCK Pi':1
2 KB (247 words) - 10:07, 1 August 2019
-
====Paso 1: Requisitos ====
1. Inserta el M.2 NVME SSD en tu PC.
2 KB (376 words) - 10:34, 1 August 2019
-
ROCK Pi 4 está oficialmente soportado por el núcleo desde v5.1 gracias al desarrollador Akash Gajjar de Mentor. A continuación se detalla
cd linux-5.1.15/
2 KB (384 words) - 10:56, 1 August 2019
-
auth_algs=1
#subnet 192.168.1.0 netmask 255.255.255.0 {
2 KB (183 words) - 09:55, 27 July 2020
-
====Step 1: Make sure rkdeveloptool is set up on host computer====
DevNo=1 Vid=0x2207,Pid=0x330e,LocationID=104 Maskrom
4 KB (624 words) - 09:37, 13 September 2022
-
===Step 1: Connecting your ROCK Pi S on PC===
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
2 KB (299 words) - 07:56, 28 October 2019
-
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
..../configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
5 KB (712 words) - 18:29, 27 August 2019
-
...2A， 15V/2A和20V/2A输入。ROCK Pi 4也支持 QC 3.0/2.0 9V/2A 和 12V/1.5A输入。
! colspan="1" width=42% | ROCK PI 4 Model A
6 KB (447 words) - 03:29, 29 September 2022
-
...Mbps); verifique se o cabo USB para TTL suporta a taxa de transmissão de 1,5 Mbps. Aqui algum modelo [https://www.silabs.com/products/interface/usb-br
...na plataforma macOS não suporta taxa de transmissão personalizada, como 1,5 Mbps devido a restrições de driver. Se você sabe como definir a taxa d
4 KB (661 words) - 17:47, 9 September 2019
-
...power input with USB PD support for both 2.5inch SSD and Raspberry Pi 4(v1.1 hardware)
* Support software RAID 0/1/5
14 KB (1,976 words) - 04:03, 13 September 2022
-
* Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
* Support software RAID 0/1/5
11 KB (1,480 words) - 08:54, 12 May 2023
-
! colspan="1" | ROCK Pi E
...C RK3328 <br />Quad Cortex-A53 ARM 64bits processor <br /> frequency up to 1.3GHz
7 KB (1,091 words) - 03:29, 29 September 2022
-
! colspan="1" width=42% | ROCK PI X Model A
! colspan="1" width=42% | ROCK PI X Model B
5 KB (971 words) - 03:29, 29 September 2022
-
! colspan="1" width=42% | ROCK PI X Model A
! colspan="1" width=42% | ROCK PI X Model B
2 KB (326 words) - 03:30, 29 September 2022
-
...m dois modelos, Modelo A e Modelo B, cada modelo possui opções de RAM de 1 GB, 2 GB ou 4 GB. Para diferenças detalhadas dos modelos A e B, verifique
5 KB (649 words) - 03:30, 29 September 2022
-
! colspan="1" width=42% | ROCK PI X Model A
! colspan="1" width=42% | ROCK PI X Model B
2 KB (350 words) - 03:30, 29 September 2022
-
...rnet, conectividade sem fio e mecanismo de detecção de voz no tamanho de 1,7 polegadas, Torne-o perfeito para aplicativos de IoT e voz. O ROCK Pi S ve
5 KB (631 words) - 17:48, 2 October 2019
-
==Paso 1 Obtener el código fuente ==
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
4 KB (518 words) - 08:02, 20 October 2019
-
* Memoria RAM LPDDR4 de 1/2/4GB
1 KB (237 words) - 09:51, 20 October 2019
-
* Controlador de alta velocidad USB3.1 Gen2 GL3227E
544+1 records in
1 KB (200 words) - 10:17, 20 October 2019
-
{| class="wikitable" border="1"
| || || 1 || || 2 || ||
5 KB (579 words) - 10:27, 21 October 2019
-
=== Paso 1 ===
3 KB (578 words) - 05:16, 25 October 2019
-
==== Paso 1 ====
828 B (117 words) - 11:12, 21 October 2019
-
===Step 1: Connecting your ROCK Pi S on PC===
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
2 KB (299 words) - 07:26, 28 October 2019
-
====Step 1: Install TFTP and TFTP server====
1.Create a folder,like this:
24 KB (1,695 words) - 06:58, 29 June 2020
-
====Etapa 1: Instalar o servidor TFTP e TFTP====
1.Crie uma pasta, assim:
19 KB (1,004 words) - 19:11, 3 November 2019
-
! colspan="1" | ROCK Pi E
...C RK3328 <br />Quad Cortex-A53 ARM 64bits processor <br /> frequency up to 1.3GHz
6 KB (1,027 words) - 03:30, 29 September 2022
-
==== Step 1. Install Bonjour ====
Please refer to the order and operation in the figure above, and the position 1 is '''rock@rockpis.local'''
2 KB (299 words) - 03:02, 13 April 2020
-
$ git clone --depth 1 https://github.com/armbian/build
2 KB (244 words) - 09:32, 6 December 2019
-
| rowspan="8" | eMMC Socket [1]
* Note [1]: ROCK Pi E support eMMC module in size 16/32/64/128GB. Check [[Rockpi4/har
1 KB (168 words) - 03:30, 29 September 2022
-
...se serial console cable or any HAT.), find where the PIN#
1(PCBA silkscreen
1) is on ROCK Pi E.
<div class="panel-heading"><h3>Hardware V1.0/V1.
1</h3></div>
9 KB (1,184 words) - 12:31, 21 January 2021
-
...CK Pi E is 1500000(1.5Mbps), please check if your USB to TTL cable support 1.5Mbps baudrate. Some model of [https://www.silabs.com/products/interface/us
...the serial tool on macOS platform can not support custom baudrate such as 1.5Mbps due to driver restriction. If you know how to set custom baudrate on
4 KB (655 words) - 14:37, 23 August 2020
-
| 1 | 32KB | loader1 | First stage loader |
971 B (104 words) - 08:05, 20 November 2019
-
To enable I2C-1 (/dev/i2c-1), add item "rk3328-i2c1" to the "overlays=" line.
7 KB (1,003 words) - 03:32, 29 September 2022
-
After version 1.1.2, ROCK-X SDK provided C and Python interfaces.
1. The sample application
3 KB (437 words) - 08:04, 3 March 2020
-
1) '''Model conversion''': support Caffe、Tensorflow、TensorFlow Lite、ONN
pip3 install scipy-1.2.0-cp36-cp36m-linux_aarch64.whl
6 KB (877 words) - 02:30, 16 March 2020
-
1. Insert the uSD Card into uSD Card Reader, which connects to host computer.
$ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
2 KB (323 words) - 07:31, 15 June 2020
-
1. Insert the eMMC to microSD/USB breakout board, which connects to host comp
$ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
2 KB (378 words) - 07:31, 15 June 2020
-
1. Insert the M.2 NVME to USB breakout board, which connects to host compute
$ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
4 KB (618 words) - 07:29, 15 June 2020
-
Case 1: Empty SPI flash, Empty eMMC module
1. Use upgrade_tool on Linux. [[ Android/upgrage_tool | Configuration upgrade
2 KB (396 words) - 07:33, 15 June 2020
-
[[RockpiN10 | RockpiN10]] > [[RockpiN10/Android8 | Build Android 8.1]]
...repo init -u https://github.com/radxa/manifests.git -b rk3399pro-android-8.1 -m rk3399pro-rk-vendor-release.xml
5 KB (696 words) - 06:22, 12 August 2021
-
[ 4.437235] usb 3-1: New USB device found, idVendor=2207, idProduct=180a
==== 1. NPU sleep and USB enumerating ====
2 KB (310 words) - 02:32, 6 August 2020
-
...CPU&NPU is 1500000(1.5Mbps), please check if your USB to TTL cable support 1.5Mbps baudrate. Some model of [https://www.silabs.com/products/interface/us
...the serial tool on macOS platform can not support custom baudrate such as 1.5Mbps due to driver restriction. If you know how to set custom baudrate on
5 KB (713 words) - 12:35, 15 January 2021
-
* Step 1: Double click file AndroidTool.exe to start the application.
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
7 KB (1,026 words) - 07:42, 9 April 2021
-
1. Insert the uSD Card into uSD Card Reader, which connects to host computer.
$ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
2 KB (273 words) - 11:30, 17 January 2020
-
...15V/2A and 20V/2A. Besides, the Pi supports QC 3.0/2.0 with 9V/2A and 12V/1.5A.
! colspan="1" width=30% | ROCK PI N10 Model A
5 KB (898 words) - 08:19, 24 August 2021
-
====Paso 1: Instalar TFTP y el servidor TFTP====
1.Crear una carpeta, así:
19 KB (992 words) - 17:34, 3 December 2019
-
$ git clone --depth 1 https://github.com/armbian/build
2 KB (278 words) - 09:33, 6 December 2019
-
* Support software RAID 0/1/5
* Utilize two lanes PCIe 2.1 buses on ROCK Pi 4
4 KB (703 words) - 05:25, 13 September 2023
-
# echo 1 > /sys/class/gpio/gpio124/value # Turn LED off
1 KB (195 words) - 11:18, 6 June 2022
-
! colspan="1" width=30% | ROCK PI N10 Model A
! colspan="1" width=30% | ROCK PI N10 Model B
12 KB (1,863 words) - 10:25, 19 November 2021
-
==== Option 1: Serial console ====
[ 839.258118] usb 8-1: New USB device found, idVendor=2207, idProduct=1808
7 KB (1,013 words) - 03:33, 29 September 2022
-
==== Option 1: USB access(adb) ====
Note: You can also get the IP of ROCK Pi S from option 1 or option 2 if you can not access network administrator page.
12 KB (1,763 words) - 03:33, 29 September 2022
-
| 1 || 16MB || boot ||Kernel partition, bootable
814 B (108 words) - 05:55, 10 April 2020
-
param_spidev_spi_bus=1
Kernel log level: 1~7
21 KB (3,155 words) - 12:32, 8 January 2024
-
| || || || +3.3V || style="background:yellow"| 1 || ||style="background:red"| 2 || +5.0V || || ||
RK3399PRO have three IO voltages, 1.8V/3.0V/3.3V. For ROCK Pi N10, below is the default voltage:
5 KB (548 words) - 12:28, 20 December 2020
-
1. Add Rockchip Official Source:
...localinstall --nogpgcheck http://repo.rock-chips.com/fedora/rockchip-repo-1.0-4.fc28.aarch64.rpm
3 KB (350 words) - 08:05, 29 February 2020
-
==== Option 1: Serial console ====
BD Address: 87:0D:F3:A1:02:B9 ACL MTU: 1021:8 SCO MTU: 64:1
7 KB (951 words) - 03:33, 29 September 2022
-
...$ sudo apt-get install -y gstreamer1.0-rockchip1-extra #version: 20190621-1
...apt-get install -y gstreamer1.0-rockchip1-extra-dbgsym #version: 20190621-1
1 KB (180 words) - 07:56, 16 April 2020
-
=== Part 1: Set Ethernet static IP Address ===
- 192.168.1.200/24
3 KB (331 words) - 09:21, 8 September 2021
-
[ 30.578257] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 30.702800] usb 2-1: New USB device found, idVendor=2c7c, idProduct=0125
4 KB (452 words) - 04:02, 21 March 2020
-
RX packets 144 bytes 1152 (1.1 KiB)
tq 20 prop-seg 18 phase-seg1 18 phase-seg2 13 sjw 1
3 KB (434 words) - 02:01, 7 February 2023
-
===
1. Nav Bar===
<div class="btn btn-primary pull-right"><i class="fa fa-language"></i> [[{{{
1|:{{NAMESPACE}}:{{BASEPAGENAME}}}}}|{{#language:en}}]]</div>
4 KB (660 words) - 08:43, 26 March 2020
-
* ROCK Pi E V1.1 or later
Step 1: Add the following line to file '''/boot/uEnv.txt'''.
3 KB (386 words) - 09:07, 30 August 2021
-
| || || +3.3V || || style="background:yellow"| 1 || ||style="background:red"| 2 || || +5.0V || ||
| height="45px" | ROCK_PI_4_I2C2 || 1 || i2c2 || ROCK_PI_4_SPI1 || 1 || spi1
15 KB (1,925 words) - 02:16, 21 March 2020
-
Thread(s) per core: 1
Socket(s): 1
876 B (96 words) - 03:38, 31 March 2020
-
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
..../configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0'
5 KB (684 words) - 09:33, 28 May 2020
-
[ 26.154634] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
[974637.533636] usb 1-4.1: new high-speed USB device number 121 using xhci_hcd
4 KB (613 words) - 12:49, 23 July 2020
-
* ROCK 3A V1.1 or later
Step 1: Set the USB OTG switch to the '''device''' side(silk screen)
2 KB (370 words) - 09:56, 24 September 2021
-
Version v2.1.0-11-g06b2be2 on Radxa ROCK Pi N10
Version v2.1.0-23-gfc8c906 on Radxa CM3 IO
14 KB (2,045 words) - 02:20, 12 June 2023
-
To enable I2C-1 (/dev/i2c-1), add item "rk3328-i2c1" to the "overlays=" line.
7 KB (996 words) - 03:34, 29 September 2022
-
1. RkUpdate Image
4 KB (526 words) - 03:45, 23 April 2021
-
{| class="wikitable" border="1"
| || || 1 || || 2 || ||
7 KB (884 words) - 02:09, 28 September 2023
-
[ 26.154634] g_ether gadget: high-speed config #1: CDC Ethernet (ECM)
[974637.533636] usb 1-4.1: new high-speed USB device number 121 using xhci_hcd
5 KB (619 words) - 08:39, 24 November 2020
-
1. By default, the ROCK Pi E uses the colorful 40PIN GPIO header PIN8 and PIN
2. The USB to TTL chip must support 1.5Mbps baud rate, some cheap USB to TTL chip can not support such high baud
721 B (103 words) - 02:49, 1 June 2020
-
1. Download the script and put into some directory of the board system
3 KB (437 words) - 04:20, 29 June 2023
-
...components/toolchain/binaries/7.3-2018.05/aarch64-linux-gnu/gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz
sudo tar xvf gcc-linaro-7.3.1-2018.05-x86_64_aarch64-linux-gnu.tar.xz -C /usr/local/
5 KB (653 words) - 09:23, 24 June 2020
-
...e:~$ sudo apt-get install -y rockchip-overlay libmraa # libmraa version: >=1.0
===== Hardware V1.0/V1.1 =====
12 KB (1,797 words) - 03:09, 9 January 2021
-
...igh performance core up to 1.8GHz and Quad Cortex A53 low power core up to 1.4Ghz, up to 4GB RAM and up to 128GB eMMC. With a simple carrier board(2 lay
Support multiple 1080P video formats decoding including VC-1, MPEG-1/2/4, VP8
4 KB (734 words) - 06:46, 9 March 2022
-
...ion is established, the LAN client should get an IP in the network 192.168.1.0/24.
ssh root@192.168.1.1
6 KB (969 words) - 06:48, 25 August 2020
-
root@rockpis:/home/rock# echo 1 > /sys/class/gpio/gpio15/value
root@rockpis:/home/rock# echo 1 > /sys/class/gpio/gpio15/value
4 KB (589 words) - 20:32, 9 April 2024
-
=== Part 1: Set Ethernet static IP Address ===
gateway4: 192.168.42.1
4 KB (450 words) - 03:07, 17 July 2020
-
| 1 ||GPIO4_D6_D || || 31 ||LCDC_D10/MAC_MDIO || || 61 ||I2S0_SDI0/PDM_SDI0 ||
3 KB (416 words) - 12:03, 12 October 2021
-
=== Step 1 ===
3 KB (569 words) - 13:26, 26 August 2022
-
1. Power on ROCK Pi X, keep pressing the del button on the keyboard until it
...e Rock Pi X uses a 1.8V SPI flash ROM from Winbond, so make sure you get a 1.8V adapter with your CH341a programmer.
5 KB (773 words) - 11:15, 23 December 2021
-
{| class="wikitable" border="1"
901 B (134 words) - 02:11, 28 September 2020
-
.../www/us/en/ark/products/93361/intel-atom-x5-z8350-processor-2m-cache-up-to-1-92-ghz.html Intel Product Page] - The SoC of ROCK Pi X - Z8350 overview
...[https://dl.radxa.com/rockpix/docs/hw/atom-z8000-datasheet-vol-1.pdf Vol. 1(.pdf)], [https://dl.radxa.com/rockpix/docs/hw/atom-z8000-datasheet-vol-2.pd
3 KB (464 words) - 10:21, 25 August 2020
-
1. Power on ROCK Pi X
1. Plugs in the keyboard to ROCK Pi X and power on, keep pressing the del but
4 KB (609 words) - 07:11, 22 January 2022
-
1. install the minicom
2 KB (307 words) - 03:36, 19 January 2022
-
| || || || +3.3V || || style="background:yellow"| 1 || ||style="background:red"| 2 || || +5.0V || || ||
4 KB (444 words) - 01:47, 18 June 2021
-
{| class="wikitable" border="1"
| || || 1 || || 2 || ||
3 KB (384 words) - 10:17, 25 August 2020
-
== Step 1: Make a bootable USB disk from Windows ISO ==
1. Download and install [https://dl.radxa.com/rockpix/tools/rufus-3.11.exe.zi
2 KB (426 words) - 07:45, 25 August 2020
-
== Step 1: Make a bootable USB disk from Rockpi_x_win10_installer ==
1. Insert your USB flash drive into the Windows host, we will use the diskpar
5 KB (758 words) - 06:25, 10 September 2021
-
== Step 1: Make a bootable USB disk from Ubuntu ISO ==
[152495.190420] usb 2-1.1: new SuperSpeed Gen 1 USB device number 9 using xhci_hcd
3 KB (481 words) - 09:56, 14 February 2022
-
== Step 1: Make a bootable USB drive from Ubuntu ISO ==
1. Download and install [https://www.balena.io/etcher/ Etcher]
2 KB (348 words) - 08:25, 25 August 2020
-
1. Get the tool
$ sudo ./dhd_priv monitor 1
701 B (96 words) - 13:30, 13 May 2022
-
! colspan="1" | Shajin
==== Option 1: ADB ====
4 KB (537 words) - 03:34, 29 September 2022
-
1. Insert the M.2 NVME SSD to host computer.
$ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage
2 KB (336 words) - 07:28, 17 September 2020
