Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search


    ROCK Pi N10 >  Install >  Install on microSD

Step1: Requirements

This page describes how to download and install the image on a microSD card and boot on ROCK Pi N10. You need at least the following.

  • ROCK Pi N10 board with power supply
  • a microSD card, larger than 8GB, class 10 or better
  • a microSD card reader, either a USB card reader or the SD card reader on laptop
  • a PC/laptop running Windows or Linux or MacOS

Step 2: Download necessary tools and image

  • Etcher is the tool we use to write image. Download the right Etcher for your PC from RockpiN10/downloads page and install it. Check [Etcher website] for more info about Etcher.
  • Choose the image you want to install from RockpiN10/downloads page and unzip it. The unzipped image name is like below:

We will use it for the writing.

Step 3: Write the image to microSD card

1. Insert the uSD Card into uSD Card Reader, which connects to host computer.

2. Run the application, for example, by executing the command on Ubuntu 16.04:

   $ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage

3. In the etcher window, we click button Select image.

Linux etcher select image.png

4. In the etcher window, we click button Select Drive.

Linux etcher select driver.png

5. In the etcher window, we click button Flash.

Linux etcher select flash button.png

6. In the etcher window, it shows us Flash Complete!

Linux etcher show complete.png

Done! Now you have successfully installed the OS image on microSD card.