Rockpi4
ROCK Pi 4
This is the documentation for ROCK Pi 4, written by Radxa Team with community contributions.
ROCK Pi 4 is a Rockchip RK3399 based SBC(Single Board Computer) by Radxa. It can run android or some Linux distributions. ROCK Pi 4 features a six core ARM processor, 64bit dual channel 3200Mb/s LPDDR4, up to 4K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, 802.11 ac WIFI, Bluetooth 5.0, USB Port, GbE LAN, 40-pin color expansion header, RTC. Also, ROCK Pi 4 supports USB PD and QC powering.
ROCK Pi 4 comes in two models, Model A and Model B, each model has 1GB, 2GB or 4GB ram options. for detailed difference of Model A and Model B, please check Specifications.
- Getting started with your ROCK Pi 4, including what you need and how to get it booted.
- GPIO pinout
Installing an operating system on your ROCK PI 4, including microSD card, eMMC module, USB drive and M.2 NVME SSD,
Information about Linux and Android development
Technical specifications about the ROCK Pi 4 hardware, including WI-FI module, LCD module, camera module, etc.
- Blog post from Radxa Team introducing the ROCK Pi hardware design
- Main board - Hardware introduction of the ROCK Pi 4
- 3D drawing - 3D model of ROCK Pi 4
- GPIO - GPIO pinout&numbers
- Display
- Camera module
- Device Tree Overlays - Use other HAT
> more
Fundamental Android usage for beginners and more advanced information for power users.
Remote Access
- Accessing your ROCK Pi 4 remotely via SSH or over the web.
- Answers to frequently asked technical questions
- Answers to sale of ROCK Pi 4
Community
- Forum: http://forum.radxa.com
- Telegram Group: https://t.me/rockpi4
- How to contribute to this wiki