Difference between revisions of "Rock3/hardware"

Revision as of 09:41, 23 August 2021

    ROCK 3 >  Hardware

Here are the technical information about the Radxa ROCK 3 hardware, including add-ons.

• Introduction of the ROCK 3 hardware
• ROCK 3 Model A
  • v1.3 schematic pdf - Download Schematic of ROCK Pi 4 model A | B
  • 3D drawing STP - Download 3D model of ROCK Pi 4 model A | B
  • 2D Bottom dxf, 2D Top dxf - Download 2D CAD of ROCK Pi 4 model A | B
  • v1.4 CAM pdf - Download components Position Reference of ROCK Pi 4 model A | B

• ROCK 3 model B
  • v1.2 schematic - Download Schematic of ROCK Pi 4 model C
  • v1.2 CAM pdf - Download components Position Reference of ROCK Pi 4 model C
  • 2D Top&Bottom dxf - Download 2D CAD of ROCK Pi 4 model C
• Hardware Revision - Difference between each hardware revisions.
• Models and SKUs - Different variant of each models

• Datasheet
  • RK3568 datasheet - The SoC of ROCK 3
  • RK3568 TRM(Technical Reference Manual) Part Part2 - The detail about RK3568
  • RK808 - The PMIC
  • AP6256 - The wifi/bt combo
  • LDR6015 - The USB PD protocol IC
  • ES8316 - The audio codec
  • Foresee LPDDR4 - The DRAM chip
  • RTL8211E - The ethernet phy
• GPIO
• LED
• eMMC module
• USB3 eMMC Reader
• RTC battery

• Official heatsink
  • 3D drawing - 3D model of official heatsink
• Display
• Camera module

• HATs
  • PoE HAT
  • Dual/Quad SATA HAT
  • Penta SATA HAT

• M.2 extend board
  • 2D file for M.2 extend board - Connector to FPC board, SSD mount board
  • Schematic of M.2 extend board - Connector to FPC board, SSD mount board
• SPI Flash

• Device Tree Overlays

• Compliance
  • CE RED - EU