Difference between revisions of "Yocto-layer-for-radxa-boards"
(→Troubleshooting) |
|||
| Line 253: | Line 253: | ||
* Post your issue at the forum: https://forum.radxa.com/t/yocto-layer-for-radxa-boards/3559 | * Post your issue at the forum: https://forum.radxa.com/t/yocto-layer-for-radxa-boards/3559 | ||
| + | * Related posts: | ||
| + | ** https://forum.radxa.com/t/investigating-smallest-possible-debian-rootfs-for-rockpi-s/4506 | ||
Revision as of 02:52, 3 November 2020
Contents
Yocto Layer for Radxa Boards
Introduction
This guide describes how to build Yocto images for Radxa boards on Ubuntu 16.04/18.04 PC.
List of Radxa Boards supported
- ROCK Pi 4 A/B/C
- ROCK Pi E
- ROCK Pi N10
- ROCK Pi PX30
- ROCK Pi S
Getting the Source
cd ~ mkdir yocto cd yocto git clone git://git.yoctoproject.org/poky -b zeus cd poky git clone git://git.openembedded.org/meta-openembedded.git -b zeus
For meta-radxa, you can select the one from Github nishantpoorswani or Github Radxa.
git clone https://github.com/nishantpoorswani/meta-radxa.git -b zeus #or git clone https://github.com/radxa/meta-radxa.git -b zeus
Setting up the Environment
Setting proxy
Set proxy for git, wget, curl.
Building the Image for Specified Board
ROCK Pi 4 A/B/C
cd poky source oe-init-build-env
After you source oe-init-build-env, the working directory becomes build. So there we change the directory to poky.
cd .. cp meta-radxa/conf/bblayers.conf.sample build/conf/bblayers.conf cp meta-radxa/conf/local.conf.sample build/conf/local.conf
Modify file build/conf/local.conf
- For ROCK Pi 4A
MACHINE ?= "rockpi-4a-rk3399" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
- For ROCK Pi 4B
MACHINE ?= "rockpi-4b-rk3399" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
- For ROCK Pi 4C
MACHINE ?= "rockpi-4c-rk3399" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
Source the script oe-init-build-env.
source oe-init-build-env
Start to build the system image.
- For minimal variant
bitbake -k radxa-minimal-image
- For console variant
bitbake -k radxa-console-image
- For desktop variant
bitbake -k radxa-desktop-image
ROCK Pi E
cd poky source oe-init-build-env
After you source oe-init-build-env, the working directory becomes build. So there we change the directory to poky.
cd .. cp meta-radxa/conf/bblayers.conf.sample build/conf/bblayers.conf cp meta-radxa/conf/local.conf.sample build/conf/local.conf
Modify file build/conf/local.conf
MACHINE ?= "rockpi-e-rk3328" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
Source the script oe-init-build-env.
source oe-init-build-env
Start to build the system image.
- For minimal variant
bitbake -k radxa-minimal-image
- For console variant
bitbake -k radxa-console-image
- For desktop variant
bitbake -k radxa-desktop-image
ROCK Pi N10
cd poky source oe-init-build-env
After you source oe-init-build-env, the working directory becomes build. So there we change the directory to poky.
cd .. cp meta-radxa/conf/bblayers.conf.sample build/conf/bblayers.conf cp meta-radxa/conf/local.conf.sample build/conf/local.conf
Modify file build/conf/local.conf
MACHINE ?= "rockpi-n10-rk3399pro" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
Source the script oe-init-build-env.
source oe-init-build-env
Start to build the system image.
- For minimal variant
bitbake -k radxa-minimal-image
- For console variant
bitbake -k radxa-console-image
- For desktop variant
bitbake -k radxa-desktop-image
ROCK Pi PX30
cd poky source oe-init-build-env
After you source oe-init-build-env, the working directory becomes build. So there we change the directory to poky.
cd .. cp meta-radxa/conf/bblayers.conf.sample build/conf/bblayers.conf cp meta-radxa/conf/local.conf.sample build/conf/local.conf
Modify file build/conf/local.conf
MACHINE ?= "rockpi-px30" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
Source the script oe-init-build-env.
source oe-init-build-env
Start to build the system image.
- For minimal variant
bitbake -k radxa-minimal-image
- For console variant
bitbake -k radxa-console-image
- For desktop variant
bitbake -k radxa-desktop-image
ROCK Pi S
cd poky source oe-init-build-env
After you source oe-init-build-env, the working directory becomes build. So there we change the directory to poky.
cd .. cp meta-radxa/conf/bblayers.conf.sample build/conf/bblayers.conf cp meta-radxa/conf/local.conf.sample build/conf/local.conf
Modify file build/conf/local.conf
MACHINE ?= "rockpi-s-rk3308" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
Source the script oe-init-build-env.
source oe-init-build-env
Start to build the system image.
- For minimal variant
bitbake -k radxa-minimal-image
- For console variant
bitbake -k radxa-console-image
- For desktop variant
bitbake -k radxa-desktop-image
Downloads
Images
- ROCK Pi 4: https://dl.radxa.com/rockpi4/images/yocto/
- ROCK Pi E: https://dl.radxa.com/rockpie/images/yocto/
- ROCK Pi PX30: https://dl.radxa.com/rockpipx30/images/yocto/
- ROCK Pi S: https://dl.radxa.com/rockpis/images/yocto/
Flash system
ROCK Pi 4 A/B/C
ROCK Pi E
ROCK Pi N10
ROCK Pi PX30
ROCK Pi S
Working with Yocto System
Login Details
Username: root Password: rock
Troubleshooting
- Post your issue at the forum: https://forum.radxa.com/t/yocto-layer-for-radxa-boards/3559
- Related posts: