Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rockpi4/install/eMMC"

m (sudo needed for dd not xzcat)
 
(4 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
{{Languages|rockpi4/install/microSD}}
 
{{Languages|rockpi4/install/microSD}}
  
     [[rockpi4 | ROCK Pi 4]] > [[rockpi4/install | Install]] > [[rockpi4/install/eMMC | Install on eMMC module]]
+
     [[rockpi4 | ROCK Pi 4]] > [[rockpi4/install | Install]] > [[rockpi4/install/eMMC | Install to eMMC module or on board eMMC]]
  
====Possible Issues====
+
This page describe how to download and install the image on an eMMC module or the eMMC on ROCK 4 and boot from eMMC. We have two options for that:
  
RockPI4 v1.4 with SPI installed may have bootstrap code which is executed in before eMMC boostrap. This SPI bootstrap code may not be able to then boot third-party OS on eMMC, for example when booting an OS using MBR partition table instead of GUID partition table used by Radxa provided images. One example is the Armbian image on [[Rockpi4/downloads]]  which uses MBR.
 
 
To overcome this issue, SPI bootstrap code can be disabled by connecting GPIO pins 23 with 25.
 
 
Alternatively, boot the Radxa version of debian from the download page from uSD and then excute:
 
 
  $ sudo /usr/local/sbin/rockpi4b_erase_spi_flash.sh
 
  
=== Option 1: With PC and eMMC adapter ===
+
=== Option 1: With PC and eMMC module & adapter ===
  
 
====Step1: Requirements ====
 
====Step1: Requirements ====
  
This page describe how to download and install the image on an eMMC module and boot on ROCK Pi 4. You need at least the following.
+
* ROCK 4A, 4B, 4C, 4 SE, 4C Plus, for 4A Plus and 4B Plus, eMMC is not removable, follow below [[#Option_2:_With_ROCK_Pi | Option 2]]
 
+
* an eMMC module, you can buy it from radxa distributor, the eMMC module from Odroid or PINE64 also works on ROCK 4.  
* an eMMC module, you can buy it from radxa distributor, the eMMC module from Odroid or PINE64 also works on ROCK Pi 4.  
+
 
[[File:Emmc_module_top.png | 100px]] [[File:Emmc_module_bottom.png | 100px]]
 
[[File:Emmc_module_top.png | 100px]] [[File:Emmc_module_bottom.png | 100px]]
  
Line 32: Line 24:
 
* a PC/laptop running Windows or Linux or MacOS
 
* a PC/laptop running Windows or Linux or MacOS
  
You also need the following to run on ROCK Pi 4
+
You also need the following to run on ROCK 4
  
* ROCK Pi 4 board with power supply
+
* ROCK 4A, 4B, 4C, 4 SE, 4C Plus board with power supply
 
* HDMI cable for display
 
* HDMI cable for display
 
* USB keyboard and mouse for input
 
* USB keyboard and mouse for input
Line 76: Line 68:
 
Done! Now you have successfully installed the OS image on eMMC module.
 
Done! Now you have successfully installed the OS image on eMMC module.
  
=== Option 2: With ROCK Pi ===
+
=== Option 2: With ROCK 4 ===
  
 
==== Requirements ====
 
==== Requirements ====
  
* uSD card, for booting on ROCK Pi
+
* ROCK 4 board all models with power supply
* ROCK Pi 4 board with power supply
+
* uSD card, for booting on ROCK 4
 
* HDMI cable for display
 
* HDMI cable for display
 
* USB keyboard and mouse for input
 
* USB keyboard and mouse for input
  
  
====Write the image to eMMC Module on ROCK Pi====
+
====Write the image to eMMC Module on ROCK 4====
  
If you have no eMMC to μSD card converter board, install Debian Linux (or another Linux variant) first to μSD following the [[Rockpi4/install/microSD | uSD install page]]. Insert both your μSD and the (empty) eMMC module into the Rock PI 4. Reboot it. It will boot from μSD. You can now use that Linux on ROCK Pi to download your desired OS from [[Rockpi4/downloads]]  and install it onto the eMMC module. Example:
+
If you have no eMMC to μSD card converter board or you have ROCK 4A Plus or 4B Plus,  
 +
 
 +
* Install Debian Linux (or another Linux variant) first to microSD card following the [[Rockpi4/install/microSD | microSD card installation page]].  
 +
* Insert both your microSD
 +
* Insert the (empty) eMMC module into the ROCK 4A, 4B, 4C, 4 SE, 4C Plus, for 4A Plus, 4B Plus, you have eMMC on the board already
 +
* Reboot it. It will boot from microSD
 +
 
 +
You can now use that Linux on ROCK 4 to download your desired OS from [[Rockpi4/downloads]]  and install it onto the eMMC module. Example:
  
 
Verify that the system has booted from μSD, which should be '''/dev/mmcblk0p5''' and that the eMMC module is found as '''/dev/mmcblk1''':
 
Verify that the system has booted from μSD, which should be '''/dev/mmcblk0p5''' and that the eMMC module is found as '''/dev/mmcblk1''':
Line 101: Line 100:
 
Then write your downloaded OS image to eMMC:
 
Then write your downloaded OS image to eMMC:
  
     $ sudo dd if=rockpi4_debian_stretch_lxde_armhf_20181105_2120-gpt.img of=/dev/mmcblk1
+
     $ sudo dd if=rockpi4_debian_stretch_lxde_armhf_20181105_2120-gpt.img of=/dev/mmcblk1 bs=1M
  
 
If you image downloaded is img.xz format, it's compressed, use
 
If you image downloaded is img.xz format, it's compressed, use
  
     $ sudo xzcat rockpi-4cplus-ubuntu-focal-server-arm64-20220520-1242-gpt.img.xz | dd of=/dev/mmcblk1 bs=1M
+
     $ xzcat rockpi-4cplus-ubuntu-focal-server-arm64-20220520-1242-gpt.img.xz | sudo dd of=/dev/mmcblk1 bs=1M
  
 
A CLI tool to write an image with write diagnostics is pv:
 
A CLI tool to write an image with write diagnostics is pv:
Line 112: Line 111:
 
     $ sudo pv -ptera < rockpi4_debian_stretch_lxde_armhf_20181105_2120-gpt.img | dd of=/dev/mmcblk1 bs=1M
 
     $ sudo pv -ptera < rockpi4_debian_stretch_lxde_armhf_20181105_2120-gpt.img | dd of=/dev/mmcblk1 bs=1M
  
Power off your Rock PI 4, remove the μSD and power on again. The system will now boot from the eMMC module.
+
Power off your ROCK 4, remove the μSD and power on again. The system will now boot from the on board eMMC or eMMC module.
 +
 
 +
====Possible Issues====
 +
 
 +
RockPI4 v1.4 with SPI installed may have bootstrap code which is executed in before eMMC boostrap. This SPI bootstrap code may not be able to then boot third-party OS on eMMC, for example when booting an OS using MBR partition table instead of GUID partition table used by Radxa provided images. One example is the Armbian image on [[Rockpi4/downloads]]  which uses MBR.
 +
 
 +
To overcome this issue, SPI bootstrap code can be disabled by connecting GPIO pins 23 with 25.
 +
 
 +
Alternatively, boot the Radxa version of debian from the download page from uSD and then excute:
 +
 
 +
  $ sudo /usr/local/sbin/rockpi4b_erase_spi_flash.sh

Latest revision as of 06:22, 20 February 2023

    ROCK Pi 4 >  Install >  Install to eMMC module or on board eMMC

This page describe how to download and install the image on an eMMC module or the eMMC on ROCK 4 and boot from eMMC. We have two options for that:


Option 1: With PC and eMMC module & adapter

Step1: Requirements

  • ROCK 4A, 4B, 4C, 4 SE, 4C Plus, for 4A Plus and 4B Plus, eMMC is not removable, follow below Option 2
  • an eMMC module, you can buy it from radxa distributor, the eMMC module from Odroid or PINE64 also works on ROCK 4.

Emmc module top.png Emmc module bottom.png

  • an eMMC to microSD breakout board

Emmc to microSD breakout top.png Emmc to microSD breakout bottom.png

If you do not have an eMMC to μSD card converter board, you can also first install a linux system (e.g.: Debian) to a μSD Card (see Rockpi4/install/microSD) and then use the running Linux μSD System to install the desired system to the eMMC card with the eMMC card already inserted into the Rock PI 4. See below Option 2.

  • a microSD card reader, either a USB card reader or the SD card reader on laptop
  • a PC/laptop running Windows or Linux or MacOS

You also need the following to run on ROCK 4

  • ROCK 4A, 4B, 4C, 4 SE, 4C Plus board with power supply
  • HDMI cable for display
  • USB keyboard and mouse for input


Step 2: Download necessary tools and image

  • Etcher is the tool we use to write image. Download the right Etcher for your PC from Rockpi4/downloads page and install it. Check [Etcher website] for more info about Etcher.
  • Choose the image you want to install from Rockpi4/downloads page and unzip it. The unzipped image name is like below:
   rockpi4_debian_stretch_lxde_armhf_20181105_2120-gpt.img

We will use it for the writing.

Step 3: Write the image to eMMC Module

1 Plug and click the eMMC module to the eMMC to uSD breakout board, plug the breakout board to microSD card reader. Plug the card reader on PC.

Emmc module on card reader.png

2 Run the application, for example, by executing the command on Ubuntu 16.04:

   $ /bin/bash etcher-etcher-electron-1.4.5-x86_64.AppImage

3 In the etcher window, we click button Select image.

Linux etcher select image.png

4 In the etcher window, we click button Select Drive.

Linux etcher select driver.png

5 In the etcher window, we click button Flash.

Linux etcher select flash button.png

6 In the etcher window, it shows us Flash Complete!

Linux etcher show complete.png

Done! Now you have successfully installed the OS image on eMMC module.

Option 2: With ROCK 4

Requirements

  • ROCK 4 board all models with power supply
  • uSD card, for booting on ROCK 4
  • HDMI cable for display
  • USB keyboard and mouse for input


Write the image to eMMC Module on ROCK 4

If you have no eMMC to μSD card converter board or you have ROCK 4A Plus or 4B Plus,

  • Install Debian Linux (or another Linux variant) first to microSD card following the microSD card installation page.
  • Insert both your microSD
  • Insert the (empty) eMMC module into the ROCK 4A, 4B, 4C, 4 SE, 4C Plus, for 4A Plus, 4B Plus, you have eMMC on the board already
  • Reboot it. It will boot from microSD

You can now use that Linux on ROCK 4 to download your desired OS from Rockpi4/downloads and install it onto the eMMC module. Example:

Verify that the system has booted from μSD, which should be /dev/mmcblk0p5 and that the eMMC module is found as /dev/mmcblk1:

   $ dmesg | grep mmcblk
   ...
   [...] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode.
   
   $ ls -l /dev/mmcblk1
   brw-rw---- 1 root disk 179, 0 Jan  6 13:25 /dev/mmcblk1

Then write your downloaded OS image to eMMC:

   $ sudo dd if=rockpi4_debian_stretch_lxde_armhf_20181105_2120-gpt.img of=/dev/mmcblk1 bs=1M

If you image downloaded is img.xz format, it's compressed, use

   $ xzcat rockpi-4cplus-ubuntu-focal-server-arm64-20220520-1242-gpt.img.xz | sudo dd of=/dev/mmcblk1 bs=1M

A CLI tool to write an image with write diagnostics is pv:

   $ sudo apt install pv
   $ sudo pv -ptera < rockpi4_debian_stretch_lxde_armhf_20181105_2120-gpt.img | dd of=/dev/mmcblk1 bs=1M

Power off your ROCK 4, remove the μSD and power on again. The system will now boot from the on board eMMC or eMMC module.

Possible Issues

RockPI4 v1.4 with SPI installed may have bootstrap code which is executed in before eMMC boostrap. This SPI bootstrap code may not be able to then boot third-party OS on eMMC, for example when booting an OS using MBR partition table instead of GUID partition table used by Radxa provided images. One example is the Armbian image on Rockpi4/downloads which uses MBR.

To overcome this issue, SPI bootstrap code can be disabled by connecting GPIO pins 23 with 25.

Alternatively, boot the Radxa version of debian from the download page from uSD and then excute:

 $ sudo /usr/local/sbin/rockpi4b_erase_spi_flash.sh