Difference between revisions of "Rock3/dev"
< Rock3
| Line 7: | Line 7: | ||
This page describes development tips for ROCK 3. | This page describes development tips for ROCK 3. | ||
| + | * [[rock3/Debian | How to use Radxa Official Debian]] | ||
| + | * [[rock3/Ubuntu | How to use Radxa Official Ubuntu]] | ||
| + | * [[rock3/radxa-apt | Radxa APT]] | ||
| + | * [[radxa-configuration | Radxa Configuration]] | ||
| + | * [[Device-tree-overlays | Device Tree Overlays]] | ||
* [https://github.com/radxa/debos-radxa debos-radxa] build Radxa official system images | * [https://github.com/radxa/debos-radxa debos-radxa] build Radxa official system images | ||
* [[rock3/dev/serial-console | Using Serial Console]] | * [[rock3/dev/serial-console | Using Serial Console]] | ||
Revision as of 15:03, 9 July 2022
ROCK 3 > Development Guide
This page describes development tips for ROCK 3.
- How to use Radxa Official Debian
- How to use Radxa Official Ubuntu
- Radxa APT
- Radxa Configuration
- Device Tree Overlays
- debos-radxa build Radxa official system images
- Using Serial Console
- Build Debian from scratch
- PXE Boot
- Using Android Debug Bridge
- Using CAN bus communication
- Using Coral Edge TPU
- NPU Run Test
- Install libmraa
- SPI + NVME SSD boot
- Change kernel params
- Mainline Development
- Unified Extensible Firmware Interface
- Use SATA SSD on Radxa CM3 IO