Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock3/CM3p/e25/getting started"

< Rock3‎ | CM3p‎ | e25Redirect page
(Flash images)
(Redirected page to Rock3/CM/CM3I/E25/getting started)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
{{rock3_header}}
+
#redirect [[rock3/CM/CM3I/E25/getting_started]]
{{Languages|rock3/cm3p/e25}}
+
 
+
    [[rock3 | ROCK 3]] > [[rock3/CM3p | ROCK 3 Compute Module Plus]] > [[Rock3/CM3p/e25 | Radxa E25]] > [[Rock3/CM3p/e25/getting_started | Getting started]]
+
 
+
__TOC__
+
 
+
Radxa E25 is an application board based on the  [[rock3/CM3p | ROCK3 Compute Module Plus(CM3+)]] for networking applications.
+
 
+
== What you need ==
+
 
+
=== Necessary ===
+
* Radxa E25 Carrier Board
+
* CM3P any variant
+
 
+
* One of the Storage media below:
+
** microSD, larger than 8GB.
+
 
+
* Power supply
+
** option 1: Radxa E25 is powered by Type-C port. Input voltage is '''5V only'''.
+
** option 2: DC 5V on the 4-pin header
+
 
+
*USB Male A to Male A cable
+
**If you want write image on ROCK 3 from USB OTG port or use fastboot/adb commands you need an USB Male A to Male A cable to connect E25 and PC.
+
 
+
* microSD Card Reader
+
** For flashing the image into microSD Card
+
 
+
*  Ethernet cable
+
** Radxa E25 supports Internet access via WIFI or Ethernet.
+
** An Ethernet cable is used to connect your Radxa E25 to a local network and  the Internet.
+
 
+
=== Optional ===
+
* mini PCIe WiFi cards
+
** example model: DR900VX
+
* mini PCIe 4G/5G cellular card
+
** example model: Quectel RG200,  Quectel EC25 
+
* M.2 B Key LTE module 3042
+
** example model:  Quectel EM05
+
* M.2 SATA SSD 2242
+
** example model: Lenovo M.2 2242 SATA SSD
+
== Features ==
+
 
+
{| class="wikitable"
+
! Model
+
! colspan="1" width=80% | Radxa E25
+
|-
+
!SoC<br><br>CPU<br>GPU<br>NPU
+
| colspan="2" | '''RK3568''' <br><br>Quad-core Cortex-A55, freqency 2Ghz<br>
+
Mali G52<br>
+
0.8TOPS NPU
+
|-
+
! Memory
+
| colspan="2" | 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on SoM variant)
+
|-
+
! Storage
+
| colspan="2" | eMMC (8/16/32/64/128GB)<br>μSD card (μSD slot supports up to 128 GB μSD card)<br>one SPI Nor Flash<br>one EEPROM
+
|-
+
! Wireless
+
| colspan="2" | Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless.<br>Bluetooth 5.0, BLE with external antenna (depending on SoM variant).
+
|-
+
! USB
+
| colspan="2" | USB 3.0 OTG X1
+
|-
+
! Ethernet
+
| colspan="2" | 2.5GbE LAN X2
+
|-
+
! IO
+
| colspan="2" | 10-pin expansion header
+
|-
+
! LED
+
| colspan="2" | RGB LED
+
|-
+
! Key
+
| colspan="2" | Power Key X1<br>Recovery Key X1/<br>Maskrom Key X1
+
|-
+
! Power
+
| colspan="2" | USB Type-C DC 5V<br> DC 5V on 4-pin header
+
|-
+
! Size
+
| colspan="2" | 2.5x2.2 inch(70x75mm)
+
|}
+
 
+
== Resource ==
+
 
+
==== <span id="gpio">General purpose input-output (GPIO) connector</span> ====
+
 
+
Check [[ rock3/CM3p/e25/GPIO | E25 GPIO]].
+
 
+
== System images and usage ==
+
 
+
Get your favorite system images from [[rock3/downloads | Radxa E25 Downloads]].
+
 
+
And check the features of [[rock3/Ubuntu | Ubuntu]] or [[rock3/Debian | Debian]].
+
 
+
== Install images ==
+
 
+
Radxa E25 supports two boot methods including booting from eMMC and booting from MicroSD.
+
Select one of the following methods.
+
 
+
* [[rock3/installusb-install-radxa-e25 | Install to eMMC from USB port (Radxa E25) ]]
+
* [[rock3/install/microSD | Install on MicroSD]]
+
 
+
== Troubleshooting ==
+
 
+
Check [[rock3/FAQs |ROCK 3 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock3.
+

Latest revision as of 09:52, 21 May 2022