Difference between revisions of "Rock3/CM3/revision"
| Line 15: | Line 15: | ||
* Export the PMIC_SLEEP_H signal for carry board to know the SoM suspend status | * Export the PMIC_SLEEP_H signal for carry board to know the SoM suspend status | ||
* Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]]. | * Details can be found on [[Rock3/CM/CM3/pinout#Pinout_Change_History | Pinout page]]. | ||
| + | |||
| + | == v1.31 == | ||
| + | * Swap SARADC_IN3(J69, Pin37) to J1, Pin14 | ||
| + | * Swap 4G_DISABLE(J1, Pin34) to J69, Pin37 | ||
| + | * Swap PCIE_PWREN_H(J1, Pin14) to J1, Pin34 | ||
Revision as of 08:56, 10 July 2023
Radxa ROCK 3 > CM3 > CM3 Hardware Revision
v1.1
- First public revision
v1.2
- LED on the CM3 now can be controlled by GPIO
- Move the power on trigger circuit to the SoM
v1.3
- Pinout change: MIPI CSI 4-lanes split to two MIPI CSI 2-lanes,
- Export the PMIC_SLEEP_H signal for carry board to know the SoM suspend status
- Details can be found on Pinout page.
v1.31
- Swap SARADC_IN3(J69, Pin37) to J1, Pin14
- Swap 4G_DISABLE(J1, Pin34) to J69, Pin37
- Swap PCIE_PWREN_H(J1, Pin14) to J1, Pin34