Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock3/CM3/radxae23"

< Rock3‎ | CM3
(Wireless module)
(USB 2.0 OTG)
Line 92: Line 92:
  
 
=== USB 2.0 OTG ===
 
=== USB 2.0 OTG ===
 +
 +
This is the USB 2.0 OTG port hardware connection table.
 +
 +
{| class="wikitable"
 +
|-
 +
! Radxa E23 40-pin Header ||  USB Interface
 +
|-
 +
| PIN#18 || Data+
 +
|-
 +
| PIN#16 || Data-
 +
|-
 +
| PIN#14 || GND
 +
|-
 +
| PIN#2 || 5V
 +
|}
  
 
=== MicroSD ===
 
=== MicroSD ===

Revision as of 03:09, 25 November 2021

    ROCK 3 >  ROCK 3 Compute Module >  Radxa E23 Dual Ethernet Board

Radxa E23 Dual Ethernet Board is an application board for the ROCK3 Compute Module(CM3).

Radxa e23 top bottom.jpg

E for Ethernets.

This is the documentation for Radxa E23, written by Radxa Team with community contributions.

Radxa E23 is a Rockchip RK3566 based SBC(Single Board Computer) by Radxa. It equips a 64bits quad core processor, USB 3.0, dual ethernets (one 1G and one 2.5G ethernet), wireless connectivity at the size of 2.5x2.2 inch(56x65mm), making it perfect for IoT and network applications. Radxa E23 comes in various ram sizes from 1GB to 8GB LPDDR4, and uses uSD card for OS and storage as well as supporting eMMC module. Optionally, Radxa E23 supports PoE, additional HAT is required.

Status

Features

Model Radxa E23
SoC

CPU
GPU
NPU
RK3566

Quad-core Cortex-A55, freqency 2Ghz

Mali G52
0.8TOPS NPU

Memory 1GB, 2GB, 4GB or 8GB LPDDR4 (depending on variant)
Storage eMMC (8/16/32/64/128GB)
μSD card (μSD slot supports up to 128 GB μSD card)
one SPI Nor Flash
one EEPROM
Audio 3.5mm jack with mic
HD codec that supports up to 24-bit/96KHz audio.
Wireless Optional wireless LAN, 2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac wireless.
Bluetooth 5.0, BLE with onboard
external antenna options
USB USB 3.0 HOST X1
USB 2.0 OTG X1
Ethernet 1GbE LAN X1
2.5GbE LAN X1
IO 40-pin expansion header
LED Green LED X1
RGB LED X1
Key Power Key X1
Recovery Key X1
Power USB Type-C 5V
Size

Hardware Documentation

Radxa E23 Resource

Power supply

Radxa E23 is powered by Type-C port with 5V.

eMMC

Radxa E23 is equipped with different capacities of eMMC (8/16/32/64/128GB). See Radxa CM3 Models and SKU.

DDR

Radxa E23 is equipped with different capacities of DDR (1//2/4/8GB). See Radxa CM3 Models and SKU.

Wireless module

Radxa E23 is equipped with AP6256 chip (WiFi 2.4G&5G and Bluetooth 5.0).

To gain a stronger signal, you need an antenna attached to the antenna socket on board.

Ethernet

Radxa E23 has one 1GbE LAN port and one 2.5GbE LAN port.

Type-A USB 3.0

The Type-A USB 3.0 port enables the attachment of peripherals such U Disk, keyboards, mice, USB dongle etc.

USB 2.0 OTG

This is the USB 2.0 OTG port hardware connection table.

Radxa E23 40-pin Header USB Interface
PIN#18 Data+
PIN#16 Data-
PIN#14 GND
PIN#2 5V

MicroSD

Audio: 3.5mm jack with MIC

Audio can be played through speaker or headphones using a standard 3.5mm jack with MIC.

Note that HD codec supports up to 24-bit/96KHz audio.

LED

One Green Flashing LED is on Radxa CM3 shows running kernel.

One RGB LED is controlled by three PWM channels. They can be controlled via sysfs. Below is their related sysfs directories.

RGB LED --- sysfs
Red --- /sys/devices/platform/fdd70000.pwm/pwm/pwmchip*/
Green --- /sys/devices/platform/fdd70030.pwm/pwm/pwmchip*/
Blue --- /sys/devices/platform/fe6f0030.pwm/pwm/pwmchip*/

Key

There are two keys on board. One is power key and the other one is recovery key.

Key Function
Power key Power on/off Radxa E23
Recovery key Boot Radxa E23 to loader mode:
* Press recovery key and hold it
* Plug in Type-C adapter
* Wait for 5 seconds
* Release recovery key

General purpose input-output (GPIO) connector

Radxa E23 has one 40-pin expansion header.

More details about 40-pin Header

  • PWM:
  • SPI:
  • I2C:
  • UART:
  • ADC:
  • USB

System images and usage

Get your favorite system images from Radxa E23 Downloads.

And check the features of Ubuntu or Debian.

Flash images

Radxa E23 supports two boot methods including booting from eMMC and booting from MicroSD. Select one of the following methods.

Troubleshooting

Check ROCK 3 FAQs first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock3.