Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock/SD images"

Line 1: Line 1:
 +
{{rock_header}}
 
{{Languages|rock/SD images}}
 
{{Languages|rock/SD images}}
 
__TOC__
 
__TOC__

Revision as of 04:15, 6 January 2015

SD images for the rock are images booting and running on the uSD card completely. This is good when you want to try different OS or new version of the firmware without touching the nand flash.

Download

Check your hardware revision (Pro or Full/Lite), then download image "for SD card" from here

Write SD image to SD card

Windows

There are two methods to write the image to sdcard. One is Use Win32DiskImager and another is Use tools(SD_Firmware_Tool) providered by rockchip. And which should to be used ,please refer to the readme file contained in the image zip.

Before beginning, we should prepare a high quality sdcard with a storage volume large than 8GB, and a sdcard reader.

Note:Poor quality sdcard will result in the failure of boot.


Use Win32DiskImager

  • Download the Win32DiskImager from here.
  • Download the image from above link.
  • Use the Win32DiskImager to Write the image into sdcard

Win32DiskImager.png


Use SD_Firmware_Tool

1)Download SD_Firmware_Tool from http://dl.radxa.com/rock/tools/windows/SD_Firmware_Tool.zip

2)Unzip the file and Run the SD_Firmware_Tool.exe under SD_Firmware_Tool_v1.43 directory

3) Select the sdcard you will flash

Sd flash 2.png

4)restore the sdcard first.

Sd flash 3.png

5) Select "SD Boot " and right firmware, then click "Create" button

Sd flash 4.png


  • Power off the rock, insert the sdcard, then power on, the rock is booting with the images on SD card.

Linux

We use dd in Linux to write the image:

   sudo dd if=radxa_rock_xxxx_sdcard.img of=/dev/sdx              # x is the disk name of your uSD card on your PC