Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

RockpiE/dev/adb

< RockpiE‎ | dev
Revision as of 06:31, 12 August 2021 by Ken (Talk | contribs)

    ROCK Pi E >  Development >  Using adb

Requirement

  • ROCK Pi E mainboard
  • eMMC module
  • Power adapter
  • USB Male A to Dupont cable.
    • One port is Male A type and the other includes three Dupont lines.
    • Hardware connection
ROCK Pi E 40-pin Header USB Interface USB Male A to Dupont Cable
PIN#18 Data+ Green wire
PIN#16 Data- White wire
PIN#14 GND Black wire

Rock-pi-e-usb-mala-a-to-dupont-cable.jpg

Hardware support

Support hardware platform:

  • ROCK Pi E V1.1 or later

You'd better follow the installation steps.

Installation

Windows

Refer Windows ADB

Linux

Refer Linux ADB

ADB Usage

When you have adb driver installed on PC, you should modify the /boot/uEnv.txt file to add the following

verbosity=7
console=ttyS2,1500000n8
overlays=rk3328-uart2  rk3328-usb-otg
rootuuid=d8873f71-da3d-48f9-bab5-d1736409f170
initrdsize=0x6ed0f0
kernelversion=4.4.194-19-rockchip-g287ff75afc47
initrdimg=initrd.img-4.4.194-19-rockchip-g287ff75afc47
kernelimg=vmlinuz-4.4.194-19-rockchip-g287ff75afc47
fdtfile=rockchip/rk3328-rock-pi-e-rtl8211f.dtb

Check adb devices

 $ adb devices
 List of devices attached 
 0123456789ABCDEF	device

If adb device is not detected on host PC, try to ssh or use serial console first and try the following:

Firstly, update rockchip-overlay and kernel packages.

 $ sudo apt-get install -y rockchip-overlay 
 $ sudo apt-get install -y linux-4.4-rock-pi-e-latest

Secondly, install rockchip-adb package.

 $ sudo apt-get install -y rockchip-adbd

Finally, start rockchip service

 $ sudo systemctl start rockchip-adbd

Login/Shell

 $ adb shell
 # 

And type /bin/bash followed by Enter key to switch to bash shell.

 $ adb shell
 # /bin/bash
 root@rockpie:/# 
 root@rockpie:/# 

Transmit files from PC to ROCK Pi E

 $ adb push <local path> <remote path>

Example:

On PC, input the following in Terminal

 $ adb push /tmp/meet-rockpie.md /home/rock
 0 KB/s (26 bytes in 0.045s)

Check on ROCK Pi E

 root@rockpie:/home/rock# cat meet-rockpie.md 
 How do you do! ROCK Pi E!

Transmit files from ROCK Pi E to PC

 $ adb pull <remote path> <local path>

Example:

 $ adb pull /home/rock/meet-pc.md /tmp/
 0 KB/s (19 bytes in 0.086s)
 
 $ cat /tmp/meet-pc.md 
 How do you do! PC!

Usage of rockchi-adb service

Start rockchip-adb service

 $ sudo systemctl start rockchip-adbd

Stop rockchip-adb service

 $ sudo systemctl stop rockchip-adbd

Reload rockchip-adb service

 $ sudo systemctl reload rockchip-adbd
 or
 $ sudo systemctl restart rockchip-adbd


If you still have issue with adb, start a new post on the forum. https://forum.radxa.com/c/dev