Difference between revisions of "RockpiE/dev/adb"

Revision as of 01:47, 10 October 2020

    ROCK Pi E >  Development >  Using adb

Requirement

• ROCK Pi E mainboard
• eMMC module
• Power adapter
• USB Male A to Dupont cable.
  • One port is Male A type and the other includes three Dupont lines.
  • Hardware connection

Hardware support

Support hardware platform:

• ROCK Pi S V1.1
• ROCK Pi S V1.2

You'd better follow the installation steps.

Installation

Windows

Refer Windows ADB

Linux

Refer Linux ADB

ADB Usage

When you have adb driver installed on PC, below are some common used adb commands:

Check adb devices

 $ adb devices
 List of devices attached 
 0123456789ABCDEF	device

Login/Shell

 $ adb shell
 # 

And type /bin/bash followed by Enter key to switch to bash shell.

 $ adb shell
 # /bin/bash
 root@rockpie:/# 
 root@rockpie:/# 

Transmit files from PC to ROCK Pi E

 $ adb push <local path> <remote path>

Example:

On PC, input the following in Terminal

 $ adb push /tmp/meet-rockpie.md /home/rock
 0 KB/s (26 bytes in 0.045s)

Check on ROCK Pi E

 root@rockpis:/home/rock# cat meet-rockpie.md 
 How do you do! ROCK Pi E!

Transmit files from ROCK Pi E to PC

 $ adb pull <remote path> <local path>

Example:

 $ adb pull /home/rock/meet-pc.md /tmp/
 0 KB/s (19 bytes in 0.086s)
 
 $ cat /tmp/meet-pc.md 
 How do you do! PC!

FAQs

Troubleshooting

If adb device is not detected on host PC, try to ssh or use serial console first and try the following:

Firstly, update rockchip-overlay and kernel packages.

 $ sudo apt-get install -y rockchip-overlay # >= 2.2
 $ sudo apt-get install -y linux-4.4-rockpis # >= 4.4.143-34-rockchip

Secondly, install rockchip-adb package.

 $ sudo apt-get install -y rockchip-adb # >= 0.3

Finally, start rockchip service

 $ sudo systemctl start rockchip-adb