Difference between revisions of "Rockpi4/hardware/gpio"
Line 91: | Line 91: | ||
echo 1 > value # output high | echo 1 > value # output high | ||
echo 0 > value # output low | echo 0 > value # output low | ||
+ | === GPIO Libraries/API === | ||
+ | ====Install [[Rockpi4/dev/libmraa | Libmraa]] ==== |
Revision as of 01:55, 22 May 2019
ROCK Pi 4 > Hardware > GPIO
Contents
General purpose input-output (GPIO) connector
ROCK Pi 4 has a 40-pin expansion header. Each pin is distinguished by color.
GPIO number | Function2 | Function1 | GPIO | Pin# | Pin# | GPIO | Function1 | Function2 | GPIO number | |
---|---|---|---|---|---|---|---|---|---|---|
+3.3V | 1 | 2 | +5.0V | |||||||
71 | I2C7_SDA | GPIO2_A7 | 3 | 4 | +5.0V | |||||
72 | I2C7_SCL | GPIO2_B0 | 5 | 6 | GND | |||||
75 | SPI2_CLK | GPIO2_B3 | 7 | 8 | GPIO4_C4 | DEBUG_TXD | 148 | |||
GND | 9 | 10 | GPIO4_C3 | DEBUG_RXD | 147 | |||||
146 | PWM0 | GPIO4_C2 | 11 | 12 | GPIO4_A3 | I2S1_SCLK | 131 | |||
150 | PWM1 | GPIO4_C6 | 13 | 14 | GND | |||||
149 | SPDIF_TX | GPIO4_C5 | 15 | 16 | GPIO4_D2 | 154 | ||||
+3.3V | 17 | 18 | GPIO4_D4 | 156 | ||||||
40 | UART4_TXD | SPI1_TXD | GPIO1_B0 | 19 | 20 | GND | ||||
15 | UART4_RXD | SPI1_RXD | GPIO1_A7 | 21 | 22 | GPIO4_D5 | 157 | |||
41 | SPI1_CLK | GPIO1_B1 | 23 | 24 | GPIO1_B2 | SPI1_CSn | 42 | |||
GND | 25 | 26 | ADC_IN0 | |||||||
64 | I2C2_SDA | GPIO2_A0 | 27 | 28 | GPIO2_A1 | I2C2_CLK | 65 | |||
74 | I2C6_SCL | SPI2_TXD | GPIO2_B2 | 29 | 30 | GND | ||||
73 | I2C6_SDA | SPI2_RXD | GPIO2_B1 | 31 | 32 | GPIO3_C0 | SPDIF_TX | UART3_CTSn | 112 | |
76 | SPI2_CSn | GPIO2_B4 | 33 | 34 | GND | |||||
133 | I2S1_LRCK_TX | GPIO4_A5 | 35 | 36 | GPIO4_A4 | I2S1_LRCK_RX | 132 | |||
158 | GPIO4_D6 | 37 | 38 | GPIO4_A6 | I2S1_SDI | 134 | ||||
GND | 39 | 40 | GPIO4_A7 | I2S1_SDO | 135 |
IO Voltage
RK3399 have three IO voltages, 1.8V/3.0V/3.3V. For ROCK Pi 4, below is the default voltage:
| GPIO | Voltage Level | Tolerance | | ---------- | ------------- | --------- | | GPIO3_C0 | 3.3V | 3.465V | | ADC_IN0 | 1.8V | 1.98V | | Other GPIO | 3.0V | 3.14V |
GPIO number
Rockchip RK3399 GPIO has 5 banks, GPIO0 to GPIO4, each bank has 32pins, naming as below:
GPIO0_A0 ~ A7 GPIO0_B0 ~ B7 GPIO0_C0 ~ C7 GPIO0_D0 ~ D7 GPIO1_A0 ~ A7 .... GPIO1_D0 ~ D7
For Rockchip 4.4 kernel, the GPIO number can be calculated as below, take GPIO4_D5(PIN22 on 40PIN GPIO) as an example:
GPIO4_D5 = 32*4 + 8*3 + 5 = 157
To set GPIO4_D5 output
cd /sys/class/gpio echo 157 > export cd gpio157 echo out > direction echo 1 > value # output high echo 0 > value # output low