Difference between revisions of "Rock3/hardware/3a"

Revision as of 07:44, 10 September 2021

    ROCK 3 >  Hardware >  ROCK 3 A Main Board

ROCK 3 A Main Board

This hardware user manual provides information about the features and signals available on ROCK 3 A board.

1.Power Button

The power button is used to turn the device on and off.

Short pressing power button would turn on/off the device.

3.MIPI Display Interface

The ROCK Pi 4 Model A and B are equipped with one HDMI connector and one MIPI DSI. As for HDMI, the maximum resolution is 4k@60Hz. Any HDMI monitor should work as a display for the Pi 4. As for MIPI DSI, it is designed for raw LCD pannel. HDMI and MIPI DSI can work at the same time.

The MIPI DSI interface pin specification shows below.

Pin#	Name
1	VCC_MIPI
2	VCC_MIPI
3	GND
4	I2C_SDA_AUDIO
5	I2C_SCL_AUDIO
6	GND
7	MIPI_TX/RX_D0P
8	MIPI_TX_RX_D0N
9	GND
10	MIPI_TX/RX_CLKP
11	MIPI_TX_RX_CLKN
12	GND
13	MIPI_TX/RX_D1P
14	MIPI_TX/RX_D1N
15	GND

7.Power Supply

The ROCK 3A is powered by Type-C port and has a wide range of input voltage, from 9V to 21V. The ROCK 3A supports USB Type-C PD 2.0 with 9V/2A, 12V/2A, 15V/2A and 20V/2A. Besides, the Pi supports QC 3.0/2.0 with 9V/2A and 12V/1.5A. The Type-C cable you using needs to support data communication. We call it USB Type-C charging data cable.

9.HDMI

The ROCK 3A is equipped with one HDMI connector and one MIPI DSI. As for HDMI, the maximum resolution is 4k@60Hz. Any HDMI monitor should work as a display for the ROCK 3A. As for MIPI DSI, it is designed for raw LCD pannel. HDMI and MIPI DSI can work at the same time.

HDMI port supports Consumer Electronics Control (CEC) function. Using ROCK 3A connected to a TV that supports CEC, you can use the command line cec-client application to control the inputs and the TV itself.

The HDMI interface pin specification shows below.

Pin#	Name
1	HDMI_TX2P
2	GND
3	HDMI_TX2N
4	HDMI_TX1P
5	GND
6	HDMI_TX1N
7	HDMI_TX0P
8	GND
9	HDMI_TX0N
10	HDMI_TXCP
11	GND
12	HDMI_TXCN
13	HDMI_CEC
14	NC
15	DDC_SCL
16	DDC_SDA
17	GND
18	VCC5V0_HDMI
19	PORT_HPD

10.MIPI Camera Interface

There is a wide range of camera applications in our lives. MIPI CSI 2 lane on board support 800 MP camera via FPC connector.

The MIPI CSI interface pin specification shows below.

Pin#	Name
1	VCC_CAM
2	I2C4_SDA
3	I2C4_SCL
4	CAM_MCLK
5	CAM_GPIO1
6	GND
7	MIPI_RX0_CLKP
8	MIPI_RX0_CLKN
9	GND
10	MIPI_RX0_D1P
11	MIPI_RX0_D1N
12	GND
13	MIPI_RX0_D0P
14	MIPI_RX0_D0P
15	GND

11.Audio: 3.5mm jack with MIC

Audio can be played through speaker or headphones using a standard 3.5mm jack with MIC.

Note that HD codec supports up to 24-bit/96KHz audio.

12.PWM Fan

Definition table (From top to bottom in the picture)

Pin#	Name
1	+5.0V
2	PWM
3	GND

13.1000M Ethernent

14/15/21.USB

One Type-A USB 3.0 port with OTG switch, the upper one on USB 3.0 port

When the USB OTG Switch is switched to the host side, the Type-A USB 3.0 port also enables the attachment of peripherals such U Disk, keyboards, mice, USB dongle etc.

This USB 3.0 port supports On-The-Go(OTG) when the USB OTG Switch is switched to the device side. Thus the Soc is recognized as an device.

Take adb as an example. You can use a Type-A to Type-A cable as a bridge between you PC and ROCK 3A Board. In addition to the system configuration, you can setup the adb tool on your PC to access ROCK 3A over adb.

One Type-A USB 3.0 host port

Tthe Type-A USB 3.0 port enables the attachment of peripherals such U Disk, keyboards, mice, USB dongle etc.

Two Type-A USB 2.0 host port

These two ports enables the attachment of peripherals such U Disk, keyboards, mice, USB dongle etc.

One USB 2.0 signal on 40-pin header

According to the ROCK 3A SKU table, there are two USB 2.0 signal lines on 40-pin header, PIN 27&28.

When you want to select this USB function, you need to modify the hardware like this.

Remove R90526 R90527
Add R90536 R90537

16.PoE

17.SoC

SoC is RK3568.

22.RTC

The RTC connector is designed according to the standard connector type.

You can distinguish '+3.3V' and '-' from the silk screen on the board.

Pin#	Name
1	GND
2	+3.3V

23.PCIE M.2 NGFF M-KEY SOCKET Interface

On ROCK 3A board, M.2 connector supports up to 2T M2 NVME SSD.

The PCIE M.2 interface pin specification shows below.

Name	Pin#	Pin#	Name
GND	1	2	+3.3V
GND	3	4	+3.3V
PERn3	5	6	NC
PERp3	7	8	NC
GND	9	10	DAS/DSS#
PETn3	11	12	+3.3V
PETp3	13	14	+3.3V
GND	15	16	+3.3V
PERn2	17	18	+3.3V
PERp2	19	20	EMMC_CMD
GND	21	22	NC
PETn2	23	24	NC
PETp2	25	26	NC
GND	27	28	NC
PERn1	29	30	NC
PERp1	31	32	NC
GND	33	34	NC
PETn1	35	36	NC
PETp1	37	38	DEVSLP
GND	39	40	NC
PERn0/SATA-B+	41	42	NC
PERp0/SATA-B-	43	44	NC
GND	45	46	NC
PETn0/SATA-A-	47	48	NC
PETp0/SATA-A+	49	50	PERST#
GND	51	52	CLKREQ#
REFCLKN	53	54	PEWake#
REFCLKP	55	56	NC
GND	57	58	NC

NC	67	68	SUSCLK
PEDET	69	70	+3.3V
GND	71	72	+3.3V
GND	73	74	+3.3V
GND	75

24.TF Card Interface

The TF card can be used as a system storage or an external storage. When it's used as a system storage, you had better choose the ones with storage space larger than 8GB. When it's used as an external storage, you can choose the ones with storage space up to 128GB. When the TF card is inserted into the TF card slot , the device will be automatically recognized by the system.

The TF card interface pin specification shows below.

Pin#	Name
1	SDMMC0_D2
2	SDMMC0_D3
3	SDMMC0_CMD
4	VCC3V3_SYS
5	SDMMC0_CLK
6	GND
7	SDMMC0_D0
8	SDMMC0_D1
9	SDMMC0_DET_L
10	GND
11	GND
12	GND
13	GND

26. eMMC

Socket on Board Interface Feature

The high performance eMMC module is the best choice as the system storage for ROCK 3A. The eMMC module with 8GB/16GB/32GB/64GB/128GB is available.

The eMMC Socket pin specification shows below.

Name	Pin#	Pin#	Name
GND	1	34	GND
EMMC_D5	2	33	EMMC_D6
GND	3	32	GND
EMMC_D4	4	31	EMMC_D7
GND	5	30	GND
EMMC_D0	6	29	EMMC_D1
GND	7	28	GND
EMMC_CLK	8	27	EMMC_D2
GND	9	26	GND
EMMC_D3	10	25	EMMC_CMD
GND	11	24	GND
EMMC_RSTN	12	23	VCC3V3_SYS
GND	13	22	VCC3V3_SYS
GND	14	21	VCC_1V8
EMMC_RCLK	15	20	VCC_1V8
GND	16	19	GND
GND	17	18	GND

General purpose input-output (GPIO) connector

ROCK 3A has one 40-pin expansion header. Each pin is distinguished by color.

For more details, see the ROCK 3A GPIO page.

@@ Line 207: / Line 207: @@
 ==== 14/15/21.USB ====
-==== One Type-A USB 3.0 port with OTG switch, the upper one on USB 3.0 port ====
+===== One Type-A USB 3.0 port with OTG switch, the upper one on USB 3.0 port =====
 When the USB OTG Switch is switched to the '''host''' side, the Type-A USB 3.0 port also enables the attachment of peripherals such U Disk, keyboards, mice, USB dongle etc.
@@ Line 215: / Line 215: @@
 Take adb as an example. You can use a Type-A to Type-A cable as a bridge between you PC and ROCK 3A Board. In addition to the system configuration, you can setup the adb tool on your PC to access ROCK 3A over adb.
-==== One Type-A USB 3.0 host port ====
+===== One Type-A USB 3.0 host port =====
 Tthe Type-A USB 3.0 port enables the attachment of peripherals such U Disk, keyboards, mice, USB dongle etc.
-==== Two Type-A USB 2.0 host port ====
+===== Two Type-A USB 2.0 host port =====
 These two ports enables the attachment of peripherals such U Disk, keyboards, mice, USB dongle etc.
-==== One USB 2.0 signal on 40-pin header ====
+===== One USB 2.0 signal on 40-pin header =====
 According to the [https://wiki.radxa.com/Rock3/hardware/models ROCK 3A SKU table], there are two USB 2.0 signal lines on 40-pin header, PIN 27&28.