Difference between revisions of "Android/android tool"
| Line 1: | Line 1: | ||
{{Languages|Android/android_tool}} | {{Languages|Android/android_tool}} | ||
| − | [[Android | Android]] > [[Android/android_tool | android_tool]] | + | [[Android | Android]] > [[Android/android_tool | android_tool]] |
== Requirements == | == Requirements == | ||
| − | This page | + | This page describes how to download and install the rkupdate image by [https://github.com/rockchip-linux/tools/raw/master/windows/AndroidTool_Release_v2.71.zip AndroidTool]. You need at least the following. |
* a PC/laptop running Windows(64 bit) | * a PC/laptop running Windows(64 bit) | ||
* AndroidTool | * AndroidTool | ||
| + | == Install driver on PC == | ||
| − | + | There are two methods of installing drivers on PC. One is (a)using RKDriverAssistant tools - the easy way. The other is (b) install manually. | |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
<p></p> | <p></p> | ||
'''If you have already installed the USB driver please skip this step.''' | '''If you have already installed the USB driver please skip this step.''' | ||
| − | |||
====a. Install using RK Driver Assistant tools ==== | ====a. Install using RK Driver Assistant tools ==== | ||
| Line 63: | Line 59: | ||
Now the driver is installed successfully. | Now the driver is installed successfully. | ||
| − | + | ==Flash Image== | |
| − | + | ||
Download the tool first [https://github.com/rockchip-linux/tools/raw/master/windows/AndroidTool_Release_v2.71.zip AndroidTool_Release_v2.71.zip] | Download the tool first [https://github.com/rockchip-linux/tools/raw/master/windows/AndroidTool_Release_v2.71.zip AndroidTool_Release_v2.71.zip] | ||
| + | ===Flash the whole firmware === | ||
| − | + | [https://wiki.radxa.com/RockpiN10/dev/usb-install-for-android-image#Boot%20To%20Maskrom%20Mode Boot the board into Maskrom mode]. | |
| − | + | You can see "Found One MASKROM device" at the bottom of the tool.<br/> | |
| − | + | ||
| − | You can see | + | |
Then Select an image (rockdev/update.img), After that, Click "Upgrade " to begin flashing. <br/> | Then Select an image (rockdev/update.img), After that, Click "Upgrade " to begin flashing. <br/> | ||
[[File:Download_firmware1.PNG | 900px]] | [[File:Download_firmware1.PNG | 900px]] | ||
| − | |||
[[File:Download_firmware2.PNG | 900px]] | [[File:Download_firmware2.PNG | 900px]] | ||
Revision as of 12:31, 25 April 2020
Android > android_tool
Contents
Requirements
This page describes how to download and install the rkupdate image by AndroidTool. You need at least the following.
- a PC/laptop running Windows(64 bit)
- AndroidTool
Install driver on PC
There are two methods of installing drivers on PC. One is (a)using RKDriverAssistant tools - the easy way. The other is (b) install manually.
If you have already installed the USB driver please skip this step.
a. Install using RK Driver Assistant tools
Note:The software has been updated to support win10.
There’s no need to connect your Rockchip device during this procedure just download and extract RKDriverAssistant.zip
Then double click on DriverInstall.exe in the RKDriverAssistant directory to start the utility.If you've previously tried to install
the Rockchip USB drivers for any Rockchip devices make sure you click “Uninstall Driver” first.
Then click “Install Driver” and when the driver has finish installing then shut down Rockpi and connect
the Rockpi to your computer and let the board go to Maskrom mode, then your computer will detect the board and you will see it within device manager.
Now the driver should have been installed successfully!
b. Install Manually
Download driver file first. For WinXp,Vista,Win7,Download the file (usb_driver_v3.5.zip) from here . For Win8 Download the file(usb_driver_v3.7.zip) from here. shut down the Rockpi then connect the Rockpi to the computer and let the board go to Maskrom mode. After your computer should detect the board and you will see an unknown device within device manager.
Select the Unknown device then right click and select "Update Driver Software".
Select "Browse the computer for driver software".
Find the file unzipped file you downloaded earlier (usb_driver_v3.5.zip) and select either the 32/64bit folder then click "OK" to install.
When the driver is installed successful you will then see a Rockusb Device in the device manager window.
Now the driver is installed successfully.
Flash Image
Download the tool first AndroidTool_Release_v2.71.zip
Flash the whole firmware
Boot the board into Maskrom mode.
You can see "Found One MASKROM device" at the bottom of the tool.
Then Select an image (rockdev/update.img), After that, Click "Upgrade " to begin flashing.
