Difference between revisions of "Rock/sd lubuntu"
< Rock
(→How to set up booting from an SD Card) |
|||
| (9 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
| − | === How to | + | {{rock_header}} |
| − | Get a parameter file from http://dl.radxa.com/rock/images/ | + | <div class="clearfix"></div> |
| − | + | == THIS PAGE IS OBSOLETE == | |
| − | + | ||
| − | It should now boot from SD Card | + | please refer new page: [[Rock/SD images]] |
| + | |||
| + | ---- | ||
| + | |||
| + | __TOC__ | ||
| + | |||
| + | == How to boot rootfs on an SD Card == | ||
| + | |||
| + | * Get a parameter file from http://dl.radxa.com/rock/images/parameter/, make sure the root command entry of parameter file is '''root=/dev/mmcblk0p1''' | ||
| + | |||
| + | * Flash it to the board with RKAndroidTool(Windows) from [http://dl.radxa.com/rock/tools/windows/RKDevelopTool_v1.37.zip here]. Linux instructions [[Rock/flash_the_image#Flash_update.img | here]]. | ||
| + | |||
| + | * It should now boot from SD Card | ||
Example parameter file: | Example parameter file: | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | === Create Lubuntu SD Card === | + | FIRMWARE_VER:4.2.2 |
| + | MACHINE_MODEL:radxa_rock | ||
| + | MACHINE_ID:007 | ||
| + | MANUFACTURER:RADXA | ||
| + | MAGIC: 0x5041524B | ||
| + | ATAG: 0x60000800 | ||
| + | MACHINE: 3066 | ||
| + | CHECK_MASK: 0x80 | ||
| + | KERNEL_IMG: 0x60408000 | ||
| + | #RECOVER_KEY: 1,1,0,20,0 | ||
| + | CMDLINE:console=ttyFIQ0,115200 console=tty0 '''root=/dev/mmcblk0p1''' rw rootfstype=ext4 mac_addr=12:21:34:43:56:65 init=/sbin/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00008000@0x00002000(boot),-@0x0000A000(linuxroot) | ||
| + | |||
| + | == Create Lubuntu SD Card == | ||
| + | |||
| + | * Get a rootfs-desktop.img file from http://dl.radxa.com/rock/images/ubuntu/partitions/ | ||
| + | * Unzip it | ||
| + | * Finally copy rootfs image to sd card. | ||
| + | |||
| + | $ sudo dd if=mydir/rootfs-desktop.img of=/dev/mmcblk0p1 | ||
| + | $ sync | ||
| + | |||
| + | == Resize SD Card == | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
<PRE> | <PRE> | ||
| − | $ sudo | + | $ sudo resize2fs -p /dev/mmcblk0p1 |
| − | + | ||
</PRE> | </PRE> | ||
Latest revision as of 05:26, 6 January 2015
THIS PAGE IS OBSOLETE
please refer new page: Rock/SD images
Contents
How to boot rootfs on an SD Card
- Get a parameter file from http://dl.radxa.com/rock/images/parameter/, make sure the root command entry of parameter file is root=/dev/mmcblk0p1
- It should now boot from SD Card
Example parameter file:
FIRMWARE_VER:4.2.2 MACHINE_MODEL:radxa_rock MACHINE_ID:007 MANUFACTURER:RADXA MAGIC: 0x5041524B ATAG: 0x60000800 MACHINE: 3066 CHECK_MASK: 0x80 KERNEL_IMG: 0x60408000 #RECOVER_KEY: 1,1,0,20,0 CMDLINE:console=ttyFIQ0,115200 console=tty0 root=/dev/mmcblk0p1 rw rootfstype=ext4 mac_addr=12:21:34:43:56:65 init=/sbin/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00008000@0x00002000(boot),-@0x0000A000(linuxroot)
Create Lubuntu SD Card
- Get a rootfs-desktop.img file from http://dl.radxa.com/rock/images/ubuntu/partitions/
- Unzip it
- Finally copy rootfs image to sd card.
$ sudo dd if=mydir/rootfs-desktop.img of=/dev/mmcblk0p1 $ sync
Resize SD Card
$ sudo resize2fs -p /dev/mmcblk0p1