Difference between revisions of "Rockpi4/install/android-eMMC-rkupdate"
(Created page with "{{rockpi4_header}} {{Languages|rockpi4/install/android-microSD}} ROCK Pi 4 > Install > rockpi4/install/android-eMMC-rkupdate |...") |
(→Download Image) |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
{{Languages|rockpi4/install/android-microSD}} | {{Languages|rockpi4/install/android-microSD}} | ||
| − | [[rockpi4 | ROCK Pi 4]] > [[rockpi4/android-install | Install]] > [[rockpi4/install/android-eMMC-rkupdate | Install on eMMC module (rkupdate iamge)]] | + | [[rockpi4 | ROCK Pi 4]] > [[rockpi4/android-install | Install]] > [[rockpi4/install/android-eMMC-rkupdate | Install on eMMC module (rkupdate iamge)]] |
==Requirements == | ==Requirements == | ||
| Line 48: | Line 48: | ||
| − | Case 4: Bootable SPI flash, Bootable eMMC module: | + | Case 4: Bootable SPI flash, Bootable eMMC module: |
| − | + | ||
| − | + | ||
| − | + | ||
* Use cable to connect PIN23 and PIN25 | * Use cable to connect PIN23 and PIN25 | ||
* Power off the board and '''remove any bootable storage media''', remove microSD card, remove eMMC module | * Power off the board and '''remove any bootable storage media''', remove microSD card, remove eMMC module | ||
| Line 64: | Line 61: | ||
</code> | </code> | ||
| − | 2. Use AndroidTool on Windows. [[ Android/android_tool | | + | 2. Use AndroidTool on Windows. [[ Android/android_tool | Using AndroidTool. ]] |
Latest revision as of 07:33, 15 June 2020
ROCK Pi 4 > Install > Install on eMMC module (rkupdate iamge)
Requirements
This page describe how to download and install the rkupdate image on an eMMC module and boot on ROCK Pi 4. You need at least the following.
- an eMMC module, you can buy it from radxa distributor, the eMMC module from Odroid or PINE64 also works on ROCK Pi 4.
- an USB Male A to USB Male A cable
- a PC/laptop running Windows or Linux or MacOS
You also need the following to run on ROCK Pi 4
- ROCK Pi 4 board with power supply
- HDMI cable for display
- USB keyboard and mouse for input
Boot To Maskrom Mode
Case 1: Empty SPI flash, Empty eMMC module
- Power off the board and remove any bootable storage media, remove microSD card
- Plug Empty eMMC module
- Plug the USB Male A to Male A cable to ROCK Pi 4 OTG port (the upper USB3 port), the other side to PC
- Power on the board
Case 2: Empty SPI flash, Bootable eMMC module:
- Power off the board and remove any bootable storage media, remove microSD card, remove eMMC module
- Plug the USB Male A to Male A cable to ROCK Pi 4 OTG port (the upper USB3 port), the other side to PC
- Power on the board
- Plug Empty eMMC module
Case 3: Bootable SPI flash, Empty eMMC module:
- Use cable to connect PIN23 and PIN25
- Power off the board and remove any bootable storage media, remove microSD card
- Plug Empty eMMC module
- Plug the USB Male A to Male A cable to ROCK Pi 4 OTG port (the upper USB3 port), the other side to PC
- Power on the board
Case 4: Bootable SPI flash, Bootable eMMC module:
- Use cable to connect PIN23 and PIN25
- Power off the board and remove any bootable storage media, remove microSD card, remove eMMC module
- Plug the USB Male A to Male A cable to ROCK Pi 4 OTG port (the upper USB3 port), the other side to PC
- Power on the board
- Plug Empty eMMC module
Download Image
1. Use upgrade_tool on Linux. Configuration upgrade_tool.
radxa$ upgrade_tool uf android9-*-rkupdate.img
2. Use AndroidTool on Windows. Using AndroidTool.