Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Zero/install/eMMC erase

< Zero‎ | install
Revision as of 20:58, 26 November 2022 by Rauxon (Talk | contribs)

    Radxa Zero >  Installation >  Erase eMMC

How to erase eMMC

This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.

For more detailed guide on wiping eMMC (or if this fails), please refer to Boot Troubleshooting page.

Requirement

  • Radxa Zero or Radxa Zero 2
  • A PC/laptop running Windows, Linux, or macOS
  • USB A to C cable or C to C cable, depending on your host

How to

Follow maskrom guide to setup and load radxa-zero-erase-emmc.bin or radxa-zero2-erase-emmc.bin:

Rz-usb-helper-fastboot.png

Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.