Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Zero/install/eMMC erase"

< Zero‎ | install
(Linux)
 
(30 intermediate revisions by 4 users not shown)
Line 3: Line 3:
 
     [[zero | Radxa Zero]] > [[zero/install | Installation]] > [[zero/install/eMMC_erase | Erase eMMC]]
 
     [[zero | Radxa Zero]] > [[zero/install | Installation]] > [[zero/install/eMMC_erase | Erase eMMC]]
  
=== How to completely erase the Radxa Zero eMMC ===
+
=== How to erase eMMC ===
  
This guide describes how to completely erase Radxa Zero eMMC. Since we are running different image, Android or multiple Linux distribution on the Zero, these images uses different bootloader version or boot sequence. It's better to erase the eMMC completely and leave a clean environment before installing new images to eMMC.
+
This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.  
  
==== Requirement ====
+
For more detailed guide on wiping eMMC (or if this fails), please refer to [[Zero/install/Boot_Troubleshooting | Boot Troubleshooting]] page.
  
* Radxa Zero
+
== Requirement ==
* USB A to C cable
+
* A PC/laptop running Windows, Linux/macOS.
+
  
==== Windows ====
+
* Radxa Zero or Radxa Zero 2
 +
* A PC/laptop running Windows, Linux, or macOS
 +
* USB A to C cable or C to C cable, depending on your host
  
===== Step 1: Install drivers =====
+
== How to ==
  
Download [https://github.com/pbatard/libwdi/releases/download/b755/zadig-2.6.exe Zagdig], install it and choose '''libusb-win32''', then click ''Install Driver''.
+
Follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load [https://dl.radxa.com/zero/images/loader/radxa-zero-erase-emmc.bin radxa-zero-erase-emmc.bin] or [https://dl.radxa.com/zero2pro/images/loader/radxa-zero-2pro-erase-emmc.bin radxa-zero-2pro-erase-emmc.bin]:
 
+
[[File:Zagdig-libusb.png]]
+
 
+
Download the Android driver from Google:
+
 
+
[https://dl.google.com/android/repository/usb_driver_r13-windows.zip Click here to download the Google USB Driver ZIP file (ZIP)]
+
 
+
Unzip it and right click the '''.inf''' file to install the driver.
+
 
+
[[File:Install-win-android-driver.png]]
+
 
+
===== Step 2: Use RZ USB helper =====
+
 
+
RZ USB helper is a tool by Radxa for Windows users to manage Radxa Zero booting easier. Download it from [https://dl.radxa.com/zero/tools/windows/RZ_USB_Boot_Helper_V1.0.0.zip Radxa DL].
+
 
+
Press and hold the USB boot button on the Zero, plug in the USB to PC, '''Maskrom mode''' should be detected.
+
 
+
[[File:Rz-usb-helper-maskrom.png | 500px]]
+
 
+
Select the loader in the RZ_USB_Boot_Helper zip and click '''Run'''.
+
  
 
[[File:Rz-usb-helper-fastboot.png | 500px]]
 
[[File:Rz-usb-helper-fastboot.png | 500px]]
  
Click '''Erase''' to erase the eMMC completely.
+
Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.
 
+
[[File:Rz-usb-helper-erase.png | 500px]]
+
 
+
==== Linux ====
+
For Linux, we use amlogic boot tool to download the bootloader and boot the Zero into the fastboot mode to erase the eMMC.
+
 
+
===== Step 1: Install pyamlboot tool =====
+
 
+
    sudo pip3 install pyamlboot
+
 
+
===== Step 2: Install fastboot =====
+
 
+
Nexus Tools is an installer for the Android SDK Platform Tools package, which includes ADB, Fastboot, and other applications. We use Nexus Tools to install fastboot. If you already have fastboot installed, you can skip this step.
+
 
+
    bash <(curl -s https://raw.githubusercontent.com/corbindavenport/nexus-tools/master/install.sh)
+
 
+
After it finishes,
+
 
+
    which fastboot
+
 
+
should return you the install location.
+
 
+
===== Step 3: Boot into fastboot mode =====
+
 
+
Press and hold the USB boot button on Zero, plug in it to PC, '''lsusb''' should see the following:
+
 
+
    Bus 002 Device 030: ID 1b8e:c003 Amlogic, Inc. GX-CHIP
+
 
+
Download the fastboot loader and run it on Zero
+
 
+
    wget https://dl.radxa.com/zero/images/loader/factory-loader.img
+
    boot-g12.py factory-loader.img
+
 
+
It should output:
+
<pre>
+
Firmware Version :
+
ROM: 3.2 Stage: 0.0
+
Need Password: 0 Password OK: 1
+
Writing rz-fastboot-loader.bin at 0xfffa0000...
+
[DONE]
+
Running at 0xfffa0000...
+
[DONE]
+
AMLC dataSize=16384, offset=65536, seq=0...
+
[DONE]
+
AMLC dataSize=49152, offset=393216, seq=1...
+
[DONE]
+
AMLC dataSize=16384, offset=229376, seq=2...
+
[DONE]
+
AMLC dataSize=49152, offset=245760, seq=3...
+
[DONE]
+
AMLC dataSize=49152, offset=294912, seq=4...
+
[DONE]
+
AMLC dataSize=16384, offset=65536, seq=5...
+
[DONE]
+
AMLC dataSize=1406320, offset=81920, seq=6...
+
[DONE]
+
[BL2 END]
+
</pre>
+
 
+
Now lsusb should show the following device:
+
 
+
    Bus 002 Device 016: ID 18d1:0d02 Google Inc. USB download gadget  Serial: 1234567890
+
 
+
===== Step 4: Wipe the eMMC =====
+
 
+
    sudo fastboot devices
+
    1234567890 fastboot
+
 
+
    sudo fastboot flashing unlock_critical
+
    sudo fastboot flashing unlock
+
    sudo fastboot erase bootloader
+
    sudo fastboot erase bootloader-boot0
+
    sudo fastboot erase bootloader-boot1
+
 
+
    sudo fastboot reboot
+
 
+
Unplug and plug the power of Zero, lsusb should show the following:
+
 
+
    Bus 002 Device 014: ID 1b8e:c003 Amlogic, Inc. GX-CHIP
+
 
+
the eMMC is wiped and Zero is in maskrom mode now. You can [[zero/install/eMMC#linux | install other OS to eMMC]] now.
+
 
+
==== macOS ====
+
 
+
For macOS, we use amlogic boot tool to download the bootloader and boot the Zero into the fastboot mode to erase the eMMC.
+
 
+
===== Step 1: Install pyamlboot tool =====
+
 
+
    brew install python lsusb
+
    pip3 install pyamlboot
+
 
+
===== Step 2: Install fastboot =====
+
 
+
Nexus Tools is an installer for the Android SDK Platform Tools package, which includes ADB, Fastboot, and other applications. We use Nexus Tools to install fastboot. If you already have fastboot installed, you can skip this step.
+
 
+
    bash <(curl -s https://raw.githubusercontent.com/corbindavenport/nexus-tools/master/install.sh)
+
 
+
After it finishes,
+
 
+
    which fastboot
+
 
+
should return you the install location.
+
 
+
===== Step 3: Boot into fastboot mode =====
+
 
+
Press and hold the USB boot button on Zero, plug in it to PC, '''lsusb''' should see the following:
+
 
+
    Bus 002 Device 030: ID 1b8e:c003 Amlogic, Inc. GX-CHIP
+
 
+
Download the fastboot loader and run it on Zero
+
 
+
    wget https://dl.radxa.com/zero/images/loader/factory-loader.img
+
    boot-g12.py factory-loader.img
+
 
+
It should output:
+
<pre>
+
Firmware Version :
+
ROM: 3.2 Stage: 0.0
+
Need Password: 0 Password OK: 1
+
Writing rz-fastboot-loader.bin at 0xfffa0000...
+
[DONE]
+
Running at 0xfffa0000...
+
[DONE]
+
AMLC dataSize=16384, offset=65536, seq=0...
+
[DONE]
+
AMLC dataSize=49152, offset=393216, seq=1...
+
[DONE]
+
AMLC dataSize=16384, offset=229376, seq=2...
+
[DONE]
+
AMLC dataSize=49152, offset=245760, seq=3...
+
[DONE]
+
AMLC dataSize=49152, offset=294912, seq=4...
+
[DONE]
+
AMLC dataSize=16384, offset=65536, seq=5...
+
[DONE]
+
AMLC dataSize=1406320, offset=81920, seq=6...
+
[DONE]
+
[BL2 END]
+
</pre>
+
 
+
Now lsusb should show the following device:
+
 
+
    Bus 002 Device 016: ID 18d1:0d02 Google Inc. USB download gadget  Serial: 1234567890
+
 
+
===== Step 4: Wipe the eMMC =====
+
 
+
    fastboot devices
+
    1234567890 fastboot
+
 
+
    fastboot flashing unlock_critical
+
    fastboot flashing unlock
+
    fastboot erase bootloader
+
    fastboot erase bootloader-boot0
+
    fastboot erase bootloader-boot1
+
 
+
    fastboot reboot
+
 
+
Unplug and plug the power of Zero, lsusb should show the following:
+
 
+
    Bus 002 Device 014: ID 1b8e:c003 Amlogic, Inc. GX-CHIP
+
 
+
the eMMC is wiped and Zero is in maskrom mode now. You can [[zero/install/eMMC#macOS | install other OS to eMMC]] now.
+

Latest revision as of 07:43, 29 November 2023

    Radxa Zero >  Installation >  Erase eMMC

How to erase eMMC

This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.

For more detailed guide on wiping eMMC (or if this fails), please refer to Boot Troubleshooting page.

Requirement

  • Radxa Zero or Radxa Zero 2
  • A PC/laptop running Windows, Linux, or macOS
  • USB A to C cable or C to C cable, depending on your host

How to

Follow maskrom guide to setup and load radxa-zero-erase-emmc.bin or radxa-zero-2pro-erase-emmc.bin:

Rz-usb-helper-fastboot.png

Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.