Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Zero/install/eMMC/Windows

< Zero‎ | install‎ | eMMC
Revision as of 07:47, 16 November 2021 by Jack-ma (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
    Radxa Zero >  Installation >  Install image to eMMC  >  Windows
Step 1: Install drivers

Press and hold the USB boot button on the Zero, plug in the USB to PC.

Download Zagdig, install it. Confirm that the device is GX-CHIP, USB ID is 1B8E:C003 and choose libusb-win32, then click Install Driver.

Zagdig-libusb.png

Download the Android driver from Google:

Click here to download the Google USB Driver ZIP file (ZIP)

Unzip it and right click the .inf file to install the driver.

Install-win-android-driver.png

Step 2: Use RZ USB helper to erase eMMC and boot to USB disk mode

RZ USB helper is a tool by Radxa for Windows users to manage Radxa Zero booting easier. Download it from Radxa DL.

Press and hold the USB boot button on the Zero

Zero usb boot.jpg

plug in the USB to PC, Maskrom mode should be detected.

Rz-usb-helper-maskrom.png

Select the loader in the RZ_USB_Boot_Helper zip and click Run.

Rz-usb-helper-fastboot.png

Click Erase to erase the eMMC completely.

Rz-usb-helper-erase.png

Now download the RZ USB disk loader, select the RZ USB disk loader and click Run.

Step 3: Use Etcher to write images to eMMC

Download the latest Etcher and install it.