Zero/dev/adb
Radxa Zero > Development >> Using ADB
Contents
Description
Radxa Zero supports adb function.
One USB Type-C charging data cable can meet both power supply and adb requirement.
Here we use Type-C to Type-A USB cable with one port connected to the Type-C socket of Radxa Zero. And the other port connected to the Type-A socket of the PC.
Hardware support
Support hardware platform:
- All Radxa Zero
Software
- Kernel package version: >= 5.10.69-6-amlogic
- amlogic-adbd package version: >=0.1
You'd better follow the installation steps.
Installation
Windows
Refer Windows ADB
Linux
Refer Linux ADB
ADB Usage
When you have adb driver installed on PC, below are some common used adb commands:
Check adb devices
radxa@x86-64:~$ adb devices List of devices attached 0123456789ABCDEF device
Login/Shell
radxa@x86-64:~$ adb shell #
And type '/bin/bash' followed by Enter key to switch to bash shell.
radxa@x86-64:~$ adb shell # /bin/bash root@zero:/#
Transmit files from PC to Radxa Zero
$ adb push <local path> <remote path>
Example:
On PC, input the following in Terminal
radxa@x86-64:~$ adb push /tmp/meet-radxa-zero.md /home/rock /tmp/meet-radxa-zero.md: 1 file pushed. 0.0 MB/s (27 bytes in 0.001s)
Check on Radxa Zero
root@zero:/# cat /home/rock/meet-radxa-zero.md How do you do! Radxa Zero!
Transmit files from Radxa Zero to PC
$ adb pull <remote path> <local path>
Example:
radxa@x86-64:~$ adb pull /home/rock/meet-pc.md /tmp /home/rock/meet-pc.md: 1 file pulled. 0.0 MB/s (24 bytes in 0.001s) radxa@x86-64:~$ cat /tmp/meet-pc.md How do you do! Host PC!
Usage of amlogic-adbd service
Start amlogic-adbd service
$ sudo systemctl start amlogic-adbd
Stop amlogic-adbd service
$ sudo systemctl stop amlogic-adbd
Reload amlogic-adbd service
$ sudo systemctl reload amlogic-adbd or $ sudo systemctl restart amlogic-adbd
If you still have issue with adb, start a new post on the forum. https://forum.radxa.com/c/zero.