Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rockpi4/dev/use-uart2-as-application-uart"

< Rockpi4‎ | dev
(Created page with "{{rockpi4_header}} {{Languages|Rockpi4/dev/use-uart2-as-application-uart }} ROCK Pi 4 > Development > Rockpi4/dev/use-uart2-as-applicat...")
(No difference)

Revision as of 08:36, 7 June 2022

    ROCK Pi 4 >  Development >  Use UART2 as Application UART

Description

If you want to use uart with Kernel > 5.10 in ROCK Pi 4. You can follow these steps.

Install essential package

 sudo apt-get install -y rockpi4-dtbo

UART

Modify file /boot/hw_intfc.conf. Set "on" to enable the optional hardware interfaces while set "off" to disable.

 intfc:uart2=on
 intfc:uart4=on

And add "#" to line "intfc:dtoverlay=console-on-ttyS2"

 #intfc:dtoverlay=console-on-ttyS2
 #intfc:dtoverlay=console-on-ttyS4

by now, the uart2 can still be used as a debug port with system log. If you don't want to output kernel messages, you can disable it as follow.

Modify file /boot/extlinux/extlinux.conf.

 append earlyprintk console=ttyFIQ0,1500000n8 rw init=/sbin/init rootfstype=ext4 rootwait  root=UUID=8650cdca-49b0-4431-9667-5c639f6bab89 console=ttyS2,1500000n8

Delete strings console=ttyFIQ0,1500000n8 and console=ttyS2,1500000n8 in this line.

 append earlyprintk rw init=/sbin/init rootfstype=ext4 rootwait  root=UUID=8650cdca-49b0-4431-9667-5c639f6bab89