Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rockpi4/dev/common-interface-with-kernel-5.10"

< Rockpi4‎ | dev
 
Line 39: Line 39:
 
  append earlyprintk rw init=/sbin/init rootfstype=ext4 rootwait  root=UUID=8650cdca-49b0-4431-9667-5c639f6bab89
 
  append earlyprintk rw init=/sbin/init rootfstype=ext4 rootwait  root=UUID=8650cdca-49b0-4431-9667-5c639f6bab89
  
Please note that when ROCK Pi 4 uart2 is connected with your devices like GPS, Raspberry Pi CAN/RS485 hat, etc, please do the following step.
+
Please note that when ROCK Pi 4 uart2 is connected with your devices like Raspberry Pi CAN/RS485 hat sending some data to uart2 on ROCK Pi 4. Please do the following step.
  
 
Check the file /boot/extlinux/extlinux.conf. And delete the following line.
 
Check the file /boot/extlinux/extlinux.conf. And delete the following line.
  
 
  menu title select kernel
 
  menu title select kernel

Latest revision as of 03:13, 7 June 2022

    ROCK Pi 4 >  Development >  Common interface with Kernel 5.10

Description

If you want to use i2c, spi, uart, pwm, etc, with Kernel 5.10 in ROCK Pi 4. You'd better follow these steps.

Install essential package

Install package rockpi4-dtbo

$ sudo apt-get install -y rockpi4-dtbo

Modify file /boot/hw_intfc.conf. Add "#" to line "intfc:dtoverlay=console-on-ttyS2" and "intfc:dtoverlay=console-on-ttyS4".

#intfc:dtoverlay=console-on-ttyS2
#intfc:dtoverlay=console-on-ttyS4

UART

Modify file /boot/hw_intfc.conf. Set "on" to enable the optional hardware interfaces while set "off" to disable.

intfc:uart2=on
intfc:uart4=on

And add "#" to line "intfc:dtoverlay=console-on-ttyS2" and "intfc:dtoverlay=console-on-ttyS4".

#intfc:dtoverlay=console-on-ttyS2
#intfc:dtoverlay=console-on-ttyS4

but now, the uart2 can still be used as a debug port with system log. If you don't want to output kernel messages, you can disable it as follow.

Modify file /boot/extlinux/extlinux.conf.

append earlyprintk console=ttyFIQ0,1500000n8 rw init=/sbin/init rootfstype=ext4 rootwait  root=UUID=8650cdca-49b0-4431-9667-5c639f6bab89 console=ttyS2,1500000n8

Delete strings console=ttyFIQ0,1500000n8 and console=ttyS2,1500000n8 in this line.

append earlyprintk rw init=/sbin/init rootfstype=ext4 rootwait  root=UUID=8650cdca-49b0-4431-9667-5c639f6bab89

Please note that when ROCK Pi 4 uart2 is connected with your devices like Raspberry Pi CAN/RS485 hat sending some data to uart2 on ROCK Pi 4. Please do the following step.

Check the file /boot/extlinux/extlinux.conf. And delete the following line.

menu title select kernel