Difference between revisions of "Rock5/install"

Latest revision as of 02:57, 10 October 2023

English

ROCK 5 supports different storage media for installation, they have different IO read/write speed. Choose one to install:

Classic installation options

µSD Card

eMMC module with an USB eMMC reader

Advanced installation options

To boot from M.2 NVMe you need to flash your desired image to the SSD and also update the bootloader on the SPI to enable NVMe boot support.

M.2 NVMe SSD

Bootloader / SPI NOR flash

If you do not own a USB to eMMC reader you can alternatively flash the eMMC with the help of the maskrom mode:

install on emmc from usb port

Additional

The ROCK 5 supports maskrom mode, which is a special operation mode for CPU to wait for command from the USB-C OTG port.

The Rockchip Flash Tools are the tools required for this.

@@ Line 1: / Line 1: @@
-__NOTOC__
 {{rock5_header}}
 {{Languages|rock5/install}}
-    [[rock5 | ROCK 5]] > [[rock5/install | Installation]]
+__NOTOC__
 ROCK 5 supports different storage media for installation, they have different IO read/write speed. Choose one to install:
-* [[rock5/install/rockchip-flash-tools | Install Rockchip Flash Tools]]
+<b><u>Classic installation options</u></b>
-* [[rock5/install/spi | Install the Image to SPI Nor Flash]]
-* [[rock5/install/nvme | Install the Image to NVME SSD]]
+* [[rock5/install/microSD | µSD Card]]
-* [[rock5/install/microSD | Install the Image to Micro SD Card]]
-* [[rock5/install/eMMC | Install the Image to eMMC with USB to eMMC Reader]]
+* [[rock5/install/eMMC | eMMC module with an USB eMMC reader]]
-* [[rock5/install/usb-install-rock-5b | Install the Image to eMMC from USB Port (ROCK 5B)]]
 ----
-* [[rock5/linux/partitions | Partition table]]
-* [[rock5/radxa-apt | Update from Radxa Apt]]
+<b><u>Advanced installation options</u></b>
+To boot from M.2 NVMe you need to flash your desired image to the SSD and also update the bootloader on the SPI to enable NVMe boot support.
+* [[rock5/install/nvme | M.2 NVMe SSD]]
+* [[rock5/install/spi |  Bootloader / SPI NOR flash]]
+If you do not own a USB to eMMC reader you can alternatively flash the eMMC with the help of the maskrom mode:
+* [[rock5/install/usb-install-emmc | install on emmc from usb port ]]
+----
+<b><u>Additional</u></b>
+The ROCK 5 supports maskrom mode, which is a special operation mode for CPU to wait for command from the USB-C OTG port.
+[[rock5/install/rockchip-flash-tools | The Rockchip Flash Tools]] are the tools required for this.
+<br>