Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock3/hardware/display"

 
(5 intermediate revisions by 3 users not shown)
Line 19: Line 19:
  
 
===== Hardware connection =====
 
===== Hardware connection =====
 +
 +
[[File:Radxa-5inch-touchscreen-hw-connection.jpeg | 600px]]
  
 
===== Software support =====
 
===== Software support =====
Line 26: Line 28:
 
Upgrade kernel to at least version 4.19.193-35-rockchip
 
Upgrade kernel to at least version 4.19.193-35-rockchip
  
 +
You can uncomment line like "deb http://apt.radxa.com/buster-testing/ buster main" in file /etc/apt/sources.list.d/apt-radxa-com.list to add testing source.
 +
 +
See file /etc/apt/sources.list.d/apt-radxa-com.list
 +
 +
deb http://apt.radxa.com/buster-stable/ buster main
 +
deb http://apt.radxa.com/buster-testing/ buster main
 +
 +
After adding testing source, you need to update APT and install your needed packages.
 +
 +
$ sudo apt-get update
 
  sudo apt install -y linux-4.19-rock-3-latest
 
  sudo apt install -y linux-4.19-rock-3-latest
  
Line 33: Line 45:
  
 
Reboot ROCK 3A.
 
Reboot ROCK 3A.
 +
 +
====Radxa 5inch Touchscreen For ROCK 3C====
 +
 +
* Edit config.txt
 +
rock@rock-3c:~$ sudo vim /boot/config.txt
 +
* at the end of the file add overlay
 +
dtoverlay=rock-3c-radxa-5inch-touchscreen
 +
* update extlinux.conf
 +
rock@rock-3c:~$ sudo update_extlinux.sh
 +
* Reboot the device
 +
rock@rock-3c:~$ sudo reboot
 +
 +
====eDP LCD Sharp LQ133T1JW01 For Radxa CM3 IO====
 +
* Edit config.txt
 +
rock@radxa-cm3-io:~$ sudo vim /boot/config.txt
 +
* at the end of the file add overlay
 +
dtoverlay=radxa-cm3-io-sharp-lq133t1jw01-without-hdmi
 +
* update extlinux.conf
 +
rock@radxa-cm3-io:~$ sudo update_extlinux.sh
 +
* Reboot the device
 +
rock@radxa-cm3-io:~$ sudo reboot
  
 
==== [https://www.raspberrypi.org/products/raspberry-pi-touch-display/ Raspberry Pi 7 inch Touch Display] ====
 
==== [https://www.raspberrypi.org/products/raspberry-pi-touch-display/ Raspberry Pi 7 inch Touch Display] ====
   
+
 
 +
* Edit config.txt
 +
  rock@rock-3c:~$ sudo vim /boot/config.txt
 +
* at the end of the file add overlay
 +
dtoverlay=rock-3c-raspberrypi-7inch-touchscreen
 +
* update extlinux.conf
 +
rock@rock-3c:~$ sudo update_extlinux.sh
 +
* Reboot the device
 +
rock@rock-3c:~$ sudo reboot
 +
 
 +
Please note that RPI 7'TS need 5V power supply.
  
 
=== Part three: SPI Display ===
 
=== Part three: SPI Display ===

Latest revision as of 03:31, 5 January 2023

    ROCK 3 >  Hardware >  Display

ROCK 3 boards support many kinds of display. They are HDMI display, MIPI display, SPI LCD display, etc. We'll tell how to set them up.

Part one: HDMI Display

HDMI is supported on the following devices.

  • ROCK 3A
  • ROCK 3B
  • Radxa CM3 IO

Part two: MIPI Display

Radxa 5inch Touchscreen

Hardware connection

Radxa-5inch-touchscreen-hw-connection.jpeg

Software support

For ROCK 3A

Upgrade kernel to at least version 4.19.193-35-rockchip

You can uncomment line like "deb http://apt.radxa.com/buster-testing/ buster main" in file /etc/apt/sources.list.d/apt-radxa-com.list to add testing source.

See file /etc/apt/sources.list.d/apt-radxa-com.list

deb http://apt.radxa.com/buster-stable/ buster main
deb http://apt.radxa.com/buster-testing/ buster main

After adding testing source, you need to update APT and install your needed packages.

$ sudo apt-get update
sudo apt install -y linux-4.19-rock-3-latest

Add the item "radxa-5inch-touchscreen-on-rock-3a" to line "overlays=" in /boot/uEnv.txt

overlays=radxa-5inch-touchscreen-on-rock-3a

Reboot ROCK 3A.

Radxa 5inch Touchscreen For ROCK 3C

  • Edit config.txt
rock@rock-3c:~$ sudo vim /boot/config.txt
  • at the end of the file add overlay
dtoverlay=rock-3c-radxa-5inch-touchscreen
  • update extlinux.conf
rock@rock-3c:~$ sudo update_extlinux.sh
  • Reboot the device
rock@rock-3c:~$ sudo reboot

eDP LCD Sharp LQ133T1JW01 For Radxa CM3 IO

  • Edit config.txt
rock@radxa-cm3-io:~$ sudo vim /boot/config.txt
  • at the end of the file add overlay
dtoverlay=radxa-cm3-io-sharp-lq133t1jw01-without-hdmi
  • update extlinux.conf
rock@radxa-cm3-io:~$ sudo update_extlinux.sh
  • Reboot the device
rock@radxa-cm3-io:~$ sudo reboot

Raspberry Pi 7 inch Touch Display

  • Edit config.txt
rock@rock-3c:~$ sudo vim /boot/config.txt
  • at the end of the file add overlay
dtoverlay=rock-3c-raspberrypi-7inch-touchscreen
  • update extlinux.conf
rock@rock-3c:~$ sudo update_extlinux.sh
  • Reboot the device
rock@rock-3c:~$ sudo reboot

Please note that RPI 7'TS need 5V power supply.

Part three: SPI Display

Waveshare 3.5 inch LCD Model C

Troubleshooting