Please enable javascript, or click here to visit my ecommerce web site powered by Shopify.
Jump to: navigation, search

Difference between revisions of "Rock3/dev/sata-on-radxa-cm3-io"

< Rock3‎ | dev
(Created page with "{{rock3_header}} {{Languages|rock3/dev/adb}} ROCK 3 > Development > Use SATA SSD on Radxa CM3 IO === De...")
 
 
(2 intermediate revisions by the same user not shown)
Line 7: Line 7:
 
=== Description ===
 
=== Description ===
 
This guide tells about how to use SATA SSD on Radxa CM3 IO.
 
This guide tells about how to use SATA SSD on Radxa CM3 IO.
 +
 +
=== Hardware connection ===
 +
 +
Tested hardware:
 +
* Radxa CM3 (V1.2) + Radxa CM3 IO (V1.1)
 +
 +
=== Software setting ===
 +
 +
Please make sure that kernel is at least <code> 4.19.194-34-rockchip</code>.
 +
 +
And add the item <code>cm3-io-sata</code> to "overlays=" line in /boot/uEnv.txt.
 +
 +
For example:
 +
 +
overlays=cm3-io-sata
 +
 +
=== FAQs ===
 +
 +
 +
=== Troubleshooting ===
 +
 +
Check [[rock3/FAQs |ROCK 3 FAQs]] first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock3.

Latest revision as of 16:01, 4 May 2022

    ROCK 3 >  Development >  Use SATA SSD on Radxa CM3 IO

Description

This guide tells about how to use SATA SSD on Radxa CM3 IO.

Hardware connection

Tested hardware:

  • Radxa CM3 (V1.2) + Radxa CM3 IO (V1.1)

Software setting

Please make sure that kernel is at least 4.19.194-34-rockchip.

And add the item cm3-io-sata to "overlays=" line in /boot/uEnv.txt.

For example:

overlays=cm3-io-sata

FAQs

Troubleshooting

Check ROCK 3 FAQs first, if it doesn't help, start a new post on the forum https://forum.radxa.com/c/rock3.