Zero/install/eMMC erase

English

    Radxa Zero >  Installation >  Erase eMMC

How to erase eMMC

This guide describes how to erase Radxa Zero's eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.

For more detailed guide on wiping eMMC, please refer to Boot Troubleshooting page.

Requirement

Radxa Zero
A PC/laptop running Windows, Linux, or macOS
USB A to C cable or C to C cable, depending on your host

How to

Follow maskrom guide to setup and load radxa-zero-erase-emmc.bin:

Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.