Yocto-layer-for-radxa-boards
Contents
Yocto Layer for Radxa Boards
Introduction
This guide describes how to build Yocto images for Radxa boards on Ubuntu 16.04 PC.
List of Radxa Boards supported
- ROCK Pi E
- ROCK Pi S
Getting the Source
cd ~ mkdir yocto cd yocto git clone git://git.yoctoproject.org/poky -b zeus cd poky git clone git://git.openembedded.org/meta-openembedded.git -b zeus
For meta-radxa, you can select the one from Github nishantpoorswani or Github Radxa.
git clone https://github.com/nishantpoorswani/meta-radxa.git -b zeus #or git clone https://github.com/radxa/meta-radxa.git -b zeus
Setting up the Environment
Setting proxy
Set proxy for git, wget, curl.
Building the Image
ROCK Pi E
cd poky cp meta-radxa/conf/bblayers.conf.sample build/conf/bblayers.conf cp meta-radxa/conf/local.conf.sample build/conf/local.conf source oe-init-build-env
Modify file build/conf/local.conf
MACHINE ?= "rockpi-e-rk3328" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
Source the script oe-init-build-env
source oe-init-build-env
After you source oe-init-build-env, the build environment script, the working directory becomes build.
bitbake -k radxa-minimal-image
ROCK Pi S
cd poky cp meta-radxa/conf/bblayers.conf.sample build/conf/bblayers.conf cp meta-radxa/conf/local.conf.sample build/conf/local.conf source oe-init-build-env
Modify file build/conf/local.conf
MACHINE ?= "rockpi-s-rk3308" # uncomment this line PACKAGE_CLASSES ?= "package_deb" # use deb package
Source the script oe-init-build-env
source oe-init-build-env
After you source oe-init-build-env, the build environment script, the working directory becomes build.
bitbake -k radxa-minimal-image
Downloads
Images
- ROCK Pi E: https://dl.radxa.com/rockpie/images/yocto/
- ROCK Pi S: https://dl.radxa.com/rockpis/images/yocto/
Flash system
ROCK Pi E
ROCK Pi S
Working with Yocto System
Login Details
Username: root Password: rock
Troubleshooting
- Post your issue at the forum: https://forum.radxa.com/t/yocto-layer-for-radxa-boards/3559