English

    ROCK Pi X >  BIOS >  Serial_console

Serial Access

This article will teach you how to use Minicom to access Bios on Rockpix.

Let us first look at how the serial port is connected:

Serial port adapter board:

Serial line:

They are Rockpix, serial port adapter board and serial cable. After connecting the device according to the above diagram, you can power on rockpix to enter the bios.

Enter BIOS

Connect the keyboard to RockpiX.
Power on rockpix, and keep pressing the del key on the keyboard during the boot process until rockpix enters bios.

Use Minicom

1. install the minicom

$ sudo apt-get install minicom

2. Use minicom to access Bios of ROCK Pi X: We need to configure the minicom configuration file, such as:

$ cd ~
$ vim .minirc.pix

If you already have the file, please follow the instructions below to modify the configuration file, otherwise, copy the configuration information below to the file.

# Machine-generated file - use setup menu in minicom to change parameters.
pu port             /dev/ttyUSB0
pu baudrate         115200
pu rtscts           No
pu xonxoff          No

Minicom has the option of color display, because the interface of Bios is color, so we use this option to open the serial console.

$ sudo minicom -c on pix  # "-c on" is to turn on the color display

After ensuring that rockpix is powered on and entered Bios, you can see the Bios interface in minicom. The interface is shown in the figure below:

RockpiX/bios/serial console

Contents

Serial Access

Enter BIOS

Use Minicom