RockpiN10/install/eMMC

English

    ROCK Pi N10 >  Install >  Install on eMMC

This page describes how to install the image to the eMMC.

In addition to the method of Installation from USB OTG to eMMC. Another way to install the system image to eMMC is using uSD running system. This is why the page exists.

The storage device names are

uSD Card: /dev/mmcblk1
eMMC: /dev/mmcblk2
NVME M.2 SDD: /dev/nvme0n1

Follow the Install on microSD guide to make a bootable uSD card.

When the system is running on uSD card, do the followings.

 sudo su
 cd ~
 wget https://dl.radxa.com/rockpin10/images/debian/rockpin10_debian_buster_xfce4_arm64_20200106_0710-gpt.img.gz # get system image
 dd if=/dev/zero of=./zero.img bs=4M count=100 status=progress
 sync
 dd if=./zero.img of=/dev/mmcblk2 bs=4M status=progress
 sync
 dd if=./rockpin10_debian_buster_xfce4_arm64_20200106_0710-gpt.img of=/dev/mmcblk2 bs=4M status=progress
 sync

Power off ROCK Pi N10 and remove the uSD card.

Power on ROCK Pi N10.

We can see that ROCK Pi N10 is running on eMMC.