Zero/hardware/revisions
Radxa Zero > Hardware > Hardware revisions
| Version | Comment | |
|---|---|---|
| 1.3 | Final prototype version | |
| 1.4 | First production version | Corrected the footprint on the TYPE-C connector
Reduced the footprint of ESD0402 Moved 1L2 and 1L4 apart to reduce the likelihood of shorting the circuit Replaced FUSB340 with CH482 </p> |
| 1.5 | Minor adjustment
> Switched to a different USB Configuration Channel controller due to part shortage > The Power LED now can be controlled by GPIO_AO10 |