Zero/dev/usb-mass-storage
Radxa Zero > Development > USB Mass Storage
Contents
Description
This guide describes how to setup USB Mass Storage on Radxa Zero.
Requirement
- Radxa Zero
- Host PC with Ubuntu
- USB Male A to C or USB C to C cable
- The USB cable is used for powering the Radxa Zero as well as data transmission from your host PC to the Zero. Depends on the USB port on host PC, you may need USB A to C(host PC is USB A) or USB C to C(host PC is USB C) cable.
- Mouse, monitor and HDMI Cable
- To access Radxa Zero
- USB to TTL serial cable
- To access Radxa Zero
Support
Support hardware platform:
- All Radxa Zero
You'd better follow the installation steps.
Operations on Radxa Zero
Step 1: Make sure that kernel version is at least version 5.10.69-6-amlogic. Otherwise, do the following steps to upgrade kernel.
rock@zero:~$ sudo apt update rock@zero:~$ sudo apt install -y linux-headers-5.10.69-6-amlogic-g775a46783ad8 rock@zero:~$ sudo apt install -y inux-image-5.10.69-6-amlogic-g775a46783ad8
Step 2: Reboot the device.
rock@zero:~$ sudo reboot
Step 3: Create a file to be a shared space and make it FAT32 type.
rock@zero:~$ sudo dd if=/dev/zero of=/home/rock/share bs=1M count=512 status=progress rock@zero:~$ sudo apt-get install dosfstools rock@zero:~$ sudo mkfs.fat /home/rock/share -F 32 -I
Step 4: Enable usb mass storage with the file and create test.txt file.
rock@zero:~$ sudo modprobe g_mass_storage file=/home/rock/share stall=0 removable=1 rock@zero:~$ sudo mount /home/rock/share /mnt/ rock@zero:~$ sudo touch /mnt/test.txt rock@zero:~$ echo "hello radxa" | sudo tee /mnt/test.txt hello radxa rock@zero:~$ cat /mnt/test.txt hello radxa
Operations on Ubuntu PC
After executing command sudo modprobe g_mass_storage file=/home/rock/share stall=0 removable=1" on Radxa Zero, we would see that one device is mounted. That one is Radxa Zero share space.
$ lsblk ... sdd 8:48 1 512M 0 disk /media/radxa/5A81-B2F ...
Here we have to remount the share space.
radxa@focal:~$ sudo umount /media/radxa/5A81-B2F radxa@focal:~$ sudo mount /dev/sdd /mnt/ radxa@focal:~$ cd /mnt/ radxa@focal-:/mnt$ ls test.txt radxa@focal:/mnt$ cat test.txt hello radxa
Troubleshooting
- If you have issue with USB Mass Storage, start a new post on the forum. https://forum.radxa.com/c/zero.