English

ROCK Pi 4

This is the documentation for ROCK Pi 4, written by Radxa Team with community contributions.

ROCK Pi 4 is a Rockchip RK3399 based SBC(Single Board Computer) by Radxa. It can run android or some Linux distributions. ROCK Pi 4 features a six core ARM processor, 64bit dual channel 3200Mb/s LPDDR4, up to 4K@60 HDMI, MIPI DSI, MIPI CSI, 3.5mm jack with mic, 802.11 ac WIFI, Bluetooth 5.0, USB Port, GbE LAN, 40-pin color expansion header, RTC. Also, ROCK Pi 4 supports USB PD and QC powering.

ROCK Pi 4 comes in two models, Model A and Model B, each model has 1GB, 2GB or 4GB ram options. for detailed difference of Model A and Model B, please check Specifications.

Setup/Quick start

Getting started with your ROCK Pi 4, including what you need and how to get it booted.

Installation

Installing an operating system on your ROCK PI 4, including microSD card, eMMC module, USB drive and M.2 NVME SSD,

Development

Information about Linux and Android SDK, with how to build a system image.

Remote Access

Accessing your ROCK Pi 4 remotely via SSH or over the web.

Working With Linux

Fundamental Linux usage for beginners and more advanced information for power users.

Working With Android

Fundamental Android usage for beginners and more advanced information for power users.

Hardware

Technical specifications about the ROCK Pi 4 hardware, including WI-FI module, LCD module, camera module, etc.

Blog post from Radxa Team introducing the ROCK Pi hardware design

Refer ROCK Pi 4 Hardware page for detailed info about ROCK Pi.

Rockpi4