Difference between revisions of "Rock4/dev"
< Rock4
| Line 11: | Line 11: | ||
* [[rockpi4/dev/spi-install | Install images to SPI flash]] describe how to write bootloader to SPI flash on ROCK Pi 4. | * [[rockpi4/dev/spi-install | Install images to SPI flash]] describe how to write bootloader to SPI flash on ROCK Pi 4. | ||
* [[rockpi4/dev/Debian | Build Debian]] | * [[rockpi4/dev/Debian | Build Debian]] | ||
| + | * [[rockpi4/dev/rootfs | replace your rootfs]] | ||
* [[Yocto-layer-for-radxa-boards | Build Yocto ]] | * [[Yocto-layer-for-radxa-boards | Build Yocto ]] | ||
* [[rockpi4/dev/kernel-4.4 | Build vendor kernel(Rockchip 4.4)]] | * [[rockpi4/dev/kernel-4.4 | Build vendor kernel(Rockchip 4.4)]] | ||
Revision as of 07:36, 30 January 2023
ROCK 4 > Development Guide
This page describes development tips for ROCK Pi.
- USB Installation describe how to use PC tools to install image on ROCK Pi 4.
- Install images to SPI flash describe how to write bootloader to SPI flash on ROCK Pi 4.
- Build Debian
- replace your rootfs
- Build Yocto
- Build vendor kernel(Rockchip 4.4)
- Build mainline kernel(kernel 5.x)
- U-boot
- U-boot/PXE Boot
- USB Device Network
- Build Android (nougat) TV
- Serial Console
- Install OpenCV
- Install Libmraa
- Install OpenCL
- Setting AP Mode
- Setting WiFi Monitor Mode
- Setting Up Visual Studio For ROCK Pi 4
- Compile a kernel module on ROCK Pi 4
- Build Armbian
- Using ADB
- GPU Run Test with Kernel 5.10
- Common interface with Kernel 5.10
- Headphone work on ROCK Pi 4C Plus
- USB host and otg switch on ROCK Pi 4
- How to use Debian