Difference between revisions of "Rock/hardware revision"
PeiYao Wang (Talk | contribs) (→Pictures) |
|||
Line 13: | Line 13: | ||
* [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_schematic_20130903.pdf Schematic(.pdf)] | * [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_schematic_20130903.pdf Schematic(.pdf)] | ||
* [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_20130903.dxf Dimension file(.dxf)] | * [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_20130903.dxf Dimension file(.dxf)] | ||
+ | |||
+ | === Pictures (Radxa Rock)=== | ||
+ | [[File:rock_es_front.jpg]] | ||
+ | |||
== Revision 2013.10.25(First MP version) == | == Revision 2013.10.25(First MP version) == | ||
Line 35: | Line 39: | ||
* [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_20131025.dxf Dimension file(.dxf)] | * [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_20131025.dxf Dimension file(.dxf)] | ||
* Components position reference [http://dl.radxa.com/rock/docs/hw/componets_position_ref_top_20131025.pdf top] [http://dl.radxa.com/rock/docs/hw/componets_position_ref_bottom_20131025.pdf bottom] | * Components position reference [http://dl.radxa.com/rock/docs/hw/componets_position_ref_top_20131025.pdf top] [http://dl.radxa.com/rock/docs/hw/componets_position_ref_bottom_20131025.pdf bottom] | ||
+ | |||
=== Pictures (Radxa Rock)=== | === Pictures (Radxa Rock)=== | ||
[[File:rock_front.jpg]] | [[File:rock_front.jpg]] |
Revision as of 04:16, 16 August 2014
Contents
This page describe the difference in hardware of all rock hardware revisions.
Revision 2013.08.12(Engineering samples)
The first batch of radxa rock samples, also called radxa rock engineering samples, only 100pcs are made(Limited Edition :). Almost everything work fine on this revision. However there is still some small issue such as
- The HDMI connector is too close to the SPDIF jack, may conflict with some big header of the HDMI cable
- The UART can be damaged sometimes by some 5V TTL to USB cable (Warning: do use 3.3V TTL to USB cable)
- The reset key is acted as POWER halt function, rebooting the board need to press the reset key and then the power key.
Download
Pictures (Radxa Rock)
Revision 2013.10.25(First MP version)
This is the first MP version of radxa rock, which fixed all the known issue on the 2013.08.12 revision. Since the position of the HDMI connector is moved a little bit. Some cases of this revision can not be used on previous revision, except the very simple case. The software are the same with previous revisions.
Changes
What hardware improvement on the previous version
Circuit side
- Add UART protection for the 5V TTL to USB cable (But 3.3V TTL to USB cable is recommended)
- Add power control for the USB OTG
- Add 3.3V power reservation for the RTC
PCB side
- Change the "radxa rock" text to the radxa logo :)
- 1mm more space between HDMI and SPDIF connector
- Change the color of status led1 from yellow to blue
- Change some label print to more readable text such as DC5v@2A, Rst to Reset
- Better footprint of the crystal of the USB hub
Download
- Schematic(.pdf)
- Dimension file(.dxf)
- Components position reference top bottom
Pictures (Radxa Rock)
Revision 2014.06.10(Rock Pro)
This is the new hardware revision for the rock based on the feature requirement from the community. The major improvement are:
- Add LVDS interface(FPC connector at the bottom of the board)
- Add touch panel interface
- Add CSI interface for camera module
- Add speaker driver circuit on board
- Others remains the same of the rock