Notice: Radxa Wiki is no longer maintained and content is for reference only. Please visit the latest Radxa Documentation site:
docs.radxa.com
Difference between revisions of "Zero/hardware/revisions"
RadxaYuntian (Talk | contribs) |
|||
| Line 15: | Line 15: | ||
| 1.4 | | 1.4 | ||
| First production version | | First production version | ||
| + | | Corrected the footprint on the TYPE-C connector | ||
| + | Reduced the footprint of ESD0402 | ||
| + | Moved 1L2 and 1L4 apart to reduce the likelihood of shorting the circuit | ||
| + | Replaced FUSB340 with CH482 | ||
| + | </p> | ||
|- | |- | ||
| 1.5 | | 1.5 | ||
| − | | Switched to a different USB Configuration Channel controller due to part shortage | + | | Minor adjustment |
| − | The Power LED now can be controlled by GPIO_AO10 | + | > Switched to a different USB Configuration Channel controller due to part shortage |
| + | > The Power LED now can be controlled by GPIO_AO10 | ||
|} | |} | ||
Revision as of 05:27, 20 December 2021
Radxa Zero > Hardware > Hardware revisions
| Version | Comment | |
|---|---|---|
| 1.3 | Final prototype version | |
| 1.4 | First production version | Corrected the footprint on the TYPE-C connector
Reduced the footprint of ESD0402 Moved 1L2 and 1L4 apart to reduce the likelihood of shorting the circuit Replaced FUSB340 with CH482 </p> |
| 1.5 | Minor adjustment
> Switched to a different USB Configuration Channel controller due to part shortage > The Power LED now can be controlled by GPIO_AO10 |