Difference between revisions of "Zero/dev/adb"

Latest revision as of 02:46, 2 December 2021

English

 Radxa Zero >  Development >  Using ADB

@@ Line 1: / Line 1: @@
 {{Zero_header}}
-{{Languages|zero/dev/otg}}
+{{Languages|zero/dev/adb}}
-  [[Zero | Radxa Zero]] > [[zero/dev | Development]] >> [[zero/dev/adb | Using ADB ]]
+  [[Zero | Radxa Zero]] > [[zero/dev | Development]] > [[zero/dev/adb | Using ADB ]]
 ===Description===
-Radxa Zero supports adb function.
+Radxa Zero supports Android Debug Bridge (adb), so you can open a shell or send file directly to Radxa Zero when network connection is not available.
-One USB Type-C charging data cable can meet both power supply and adb requirement.
+One USB Type-C charging data cable can provide power while access the device in adb mode.
-Here we use Type-C to Type-A USB cable with one port connected to the Type-C socket of Radxa Zero.
+Here we use a Type-C to Type-A USB cable with Type-C end plugged in the power port of Radxa Zero, while the other end plugged into our computer.
-And the other port connected to the Type-A socket of the PC.
-===Hardware support===
+===Radxa Zero Software Requirement===
-Support hardware platform:
-* All Radxa Zero
-===Software===
 * Kernel package version: >= 5.10.69-6-amlogic
 * amlogic-adbd package version: >=0.1
+=== Software Installation ===
-You'd better follow the installation steps.
+Please follow those guides to install adb on your [[Rock/windows_adb | Windows]] or [[Rock/linux_adb | Linux]] computer.
-=== Installation ===
-==== Windows ====
-Refer [[Rock/windows_adb | Windows ADB]]
-==== Linux ====
-Refer [[Rock/linux_adb | Linux ADB]]
-===ADB Usage===
+===Common adb Usage===
-When you have adb driver installed on PC, below are some common used adb commands:
+Below are some commonly used adb commands:
 ====Check adb devices====
@@ Line 47: / Line 32: @@
   0123456789ABCDEF	device
-====Login/Shell====
+====Launch a root shell====
   radxa@x86-64:~$ adb shell
   #
-And type '/bin/bash' followed by Enter key to switch to bash shell.
+To use bash shell, simply run <code>/bin/bash</code>:
   radxa@x86-64:~$ adb shell
@@ Line 58: / Line 43: @@
   root@zero:/#
-====Transmit files from PC to Radxa Zero====
+====Send file from PC to Radxa Zero====
   $ adb push <local path> <remote path>
 Example:
-On PC, input the following in Terminal
   radxa@x86-64:~$ adb push /tmp/meet-radxa-zero.md /home/rock
   /tmp/meet-radxa-zero.md: 1 file pushed. 0.0 MB/s (27 bytes in 0.001s)
+  radxa@x86-64:~$ adb shell
-Check on Radxa Zero
+ # cat /home/rock/meet-radxa-zero.md
-  root@zero:/# cat /home/rock/meet-radxa-zero.md
   How do you do! Radxa Zero!
-====Transmit files from Radxa Zero to PC====
+====Send files from Radxa Zero to PC====
   $ adb pull <remote path> <local path>
@@ Line 87: / Line 68: @@
 === Usage of amlogic-adbd service ===
-Start amlogic-adbd service
+To use above adb commands, you need to have amlogic-adbd service running on your Radxa Zero. Below are some common service management command:
+Start amlogic-adbd service:
   $ sudo systemctl start amlogic-adbd
-Stop amlogic-adbd service
+Stop amlogic-adbd service:
   $ sudo systemctl stop amlogic-adbd
-Reload amlogic-adbd service
+Reload amlogic-adbd service:
   $ sudo systemctl reload amlogic-adbd
- or
+or
   $ sudo systemctl restart amlogic-adbd
-If you still have issue with adb, start a new post on the forum. https://forum.radxa.com/c/zero.
+Enable amlogic-adbd service auto-start at boot:
+ $ sudo systemctl enable amlogic-adbd
+Disable amlogic-adbd service auto-start at boot:
+ $ sudo systemctl disable amlogic-adbd

Difference between revisions of "Zero/dev/adb"

Latest revision as of 02:46, 2 December 2021

Contents

Description

Radxa Zero Software Requirement

Software Installation

Common adb Usage

Check adb devices

Launch a root shell

Send file from PC to Radxa Zero

Send files from Radxa Zero to PC

Usage of amlogic-adbd service