Difference between revisions of "Rock3/CM3"

Revision as of 02:19, 11 October 2021

ROCK3 Compute Module

ROCK 3 Computing Module(ROCK CM3) is a System-on-Module based on the ROCK3, containing processor, memory, eMMC Flash and Power Management Unit. These modules allow a designer to leverage the ROCK3 hardware and software stack in their own custom systems and form factors. In addition these modules have extra IO interfaces over and above what is available on the ROCK3 boards, opening up more options for the designer.

500px

Quick Feature Comparison Table

Raspberry Pi CM4	Radxa ROCK3 CM
Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz	Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
Small Footprint 55mm × 40mm × 4.7mm module	Small Footprint 55mm × 40mm × 4.7mm module
Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC	Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC bandwidth 100MBytes/s	Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth 250MBytes/s
Option for WiFi5/BT5	Option for WiFi5/BT5
Gigabit Ethernet PHY supporting IEEE 1588	Gigabit Ethernet PHY(RTL8211F), optional IEEE 1588 support
1 × USB 2.0 port ( highspeed )	1 × USB 2.0 port ( highspeed ), 1 x USB 3.0 port (5Gbps)
1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )	1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )
N/A	2 x SATA ports, one shared with USB 3, one shared with PCIe
2 x HDMI 2.0(up to 4K60)	1 x HDMI(up to 4K60)
MIPI DSI: - 1 × 2-lane MIPI DSI display port - 1 × 4-lane MIPI DSI display port	MIPI DSI: - 2 × 4-lane MIPI DSI display port - 1 x 4-lane LVDS support(shared with 1 x MIPI)
	eDP: - 1 x eDP up to 4K60
MIPI CSI-2: - 1 × 2-lane MIPI CSI camera port - 1 × 4-lane MIPI CSI camera port	MIPI CSI-2: - 1 × 2-lane MIPI CSI camera port - 1 × 4-lane MIPI CSI camera port
1 × SDIO 2.0 (CM4Lite only)	1 x SDIO 3.0
N/A	Audio Codec
28 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 5 × UART - Up to 5 × I2C - Up to 5 × SPI - 1 × SDIO interface - 1 × DPI (Parallel RGB Display) - 1 × PCM Up to - 2× PWM channels - Up to 3× GPCLK outputs	50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options: - Up to 8 × UART - Up to 8 × I2C - Up to 4 × SPI - 1 × SDIO interface - 1 × PCM - Up to 8 × PWM channels - 2 x ADC
Single +5v PSU input	Single +5v PSU input
2 x 100Pin B2B connector	3 x 100Pin B2B connector

Devices

Carrier Boards from Radxa

Picture	Name	Info
	Radxa E23 Dual Ethernet board

Carrier Boards from third party

The following carrier boards are tested and compatible with the ROCK3 CM.

Picture	Name	Info
	Raspberry Pi Compute Module 4 IO Board
	Seeed Studio Dual Gigabit Ethernet Carrier Board

@@ Line 90: / Line 90: @@
 == Devices ==
-=== Radxa E23 ===
+=== Carrier Boards from Radxa ===
-The following Carrier Boards from third party are tested and compatible with the ROCK3 CM.
+{| class="wikitable"
+|-
+! Picture
+! Name
+! Info
+|-
+| [[File:Radxa_e23_top_bottom.jpg | x100px ]]
+| [[Rock3/CM3/E23 | Radxa E23 Dual Ethernet board]]
+|
+|-
+|
+|
+|
+|-
+|
+|
+|
+|-
+|
+|
+|
+|}
-=== Raspberry Pi Compute Module 4 IO Board ===
-[[File:Cm3_rpicm4_io_board.png | 500px ]]
+=== Carrier Boards from third party ===
+The following carrier boards are tested and compatible with the ROCK3 CM.
-=== Seeed Studio Dual Gigabit Ethernet Carrier Board ===
+{| class="wikitable"
+|-
-[[File:Cm3_seeed_dual_gbe.png | 400px ]]
+! Picture
+! Name
+! Info
+|-
+| [[File:Cm3_rpicm4_io_board.png | x100px ]]
+| [[Rock3/CM3/raspcm4io | Raspberry Pi Compute Module 4 IO Board]]
+|
+|-
+| [[File:Cm3_seeed_dual_gbe.png | x100px ]]
+| Seeed Studio Dual Gigabit Ethernet Carrier Board
+|
+|-
+|
+|
+|
+|-
+|
+|
+|
+|}