Difference between revisions of "Zero/install/eMMC aml tool"
(→execute command to flash) |
|||
| Line 37: | Line 37: | ||
Bus 001 Device 052: ID 1b8e:c003 Amlogic, Inc. USB DEVICE | Bus 001 Device 052: ID 1b8e:c003 Amlogic, Inc. USB DEVICE | ||
=====execute command to flash===== | =====execute command to flash===== | ||
| − | aml-flash-tool.sh path_to_amlupdate_img/img_file | + | $ aml-flash-tool.sh path_to_amlupdate_img/img_file |
Revision as of 11:33, 8 July 2021
Zero > Install > Install on eMMC card(use aml tool)
Contents
Possible Issues
This aml-flash-tool.sh may not work very stably. If you seeing some log like:
[KO] Cleanup
please try to run again.
Step1: Requirements
Host request: Ubuntu LTS version 14.04 and later, including 14.04/16.04/18.04/20.04.
Download and install aml-flash tool:
# git clone flash tool git clone https://github.com/radxa/aml-flash-tool.git # install dependency cd aml-flash-tool ./INSTALL
Download image from amlupdate_img and extract.
Step2: Flash amlupdate_img
Run Radxa-Zero into maskrom mode
- Press and hold the button on the back side of Radxa-Zero before you plug in usb cable in the USB-PWR port.
- If Radxa-Zero running in maskrom mode correctly, you will see following info when you execute lsusb command.
$ lsusb Bus 001 Device 052: ID 1b8e:c003 Amlogic, Inc. USB DEVICE
execute command to flash
$ aml-flash-tool.sh path_to_amlupdate_img/img_file