Difference between revisions of "RockpiX/hardware/revision"
(Created page with "{{rockpix_header}} {{Languages|rockpiX/hardware/revision}} __NOTOC__ ROCK Pi X > Hardware > rockpiX/hardware/revision | Hardware R...") |
(→V1.4) |
||
| Line 19: | Line 19: | ||
=== V1.4=== | === V1.4=== | ||
| − | * | + | * Wifi antenna circuit layout is tunned to improve signal strength/sensitivity |
| − | * eMMC is now on board | + | * eMMC is now soldered on board! |
| + | * Add label/silkscreen for all connector/ports | ||
| + | * Slightly adjust the USB/RJ45 connector position to support SATA HAT | ||
Revision as of 11:45, 26 August 2020
ROCK Pi X > Hardware > Hardware Revision
There are two models of ROCK Pi X, model A and model B. Model A is a stripped down version of model B. The differences are:
- Model A doesn't have wifi/bt model(ap6255)
- the RJ45 connector on model A doesn't support PoE
- Model A doesn't have the 4Pin PoE header
Change lists
V1.3
- This is the first public batch, full working with all functions
- eMMC socket on the PCB with eMMC module support
- Use external WiFi antenna with additional u.FL stick antenna by default
V1.4
- Wifi antenna circuit layout is tunned to improve signal strength/sensitivity
- eMMC is now soldered on board!
- Add label/silkscreen for all connector/ports
- Slightly adjust the USB/RJ45 connector position to support SATA HAT