Difference between revisions of "RockpiS/dev/otg"
| Line 5: | Line 5: | ||
[[rockpiS | ROCK Pi S]] > [[rockpiS/dev | Development]] > [[RockpiS/dev/otg | Using OTG for ROCK Pi S]] | [[rockpiS | ROCK Pi S]] > [[rockpiS/dev | Development]] > [[RockpiS/dev/otg | Using OTG for ROCK Pi S]] | ||
| − | + | ===Requirement=== | |
* ROCK Pi S | * ROCK Pi S | ||
| − | *USB Type C to USB-A cable | + | * USB Type C to USB-A cable |
| − | + | ===Step 1: Connecting your ROCK Pi S on PC=== | |
Using USB Type C to USB-A cable connect your ROCK Pi S and PC. | Using USB Type C to USB-A cable connect your ROCK Pi S and PC. | ||
| − | + | ===Step 2: Make sure rkdeveloptool is set up on host computer Linux=== | |
| − | ==== Linux==== | + | ====Linux==== |
To build rkdeveloptool on a debian based Linux distribution, follow the instruction below: | To build rkdeveloptool on a debian based Linux distribution, follow the instruction below: | ||
| Line 45: | Line 45: | ||
sudo cp rkdeveloptool /usr/local/bin/ | sudo cp rkdeveloptool /usr/local/bin/ | ||
| − | ==== MacOS ==== | + | ====MacOS==== |
To build rkdeveloptool on macOS, you need [https://brew.sh/ homebrew](or similar package manager) to install required packages. | To build rkdeveloptool on macOS, you need [https://brew.sh/ homebrew](or similar package manager) to install required packages. | ||
| Line 78: | Line 78: | ||
sudo cp rkdeveloptool /usr/local/bin/ | sudo cp rkdeveloptool /usr/local/bin/ | ||
| − | + | ===Step 3: Testing connected and get help=== | |
On linux host: | On linux host: | ||
Latest revision as of 07:56, 28 October 2019
ROCK Pi S > Development > Using OTG for ROCK Pi S
Contents
Requirement
- ROCK Pi S
- USB Type C to USB-A cable
Step 1: Connecting your ROCK Pi S on PC
Using USB Type C to USB-A cable connect your ROCK Pi S and PC.
Step 2: Make sure rkdeveloptool is set up on host computer Linux
Linux
To build rkdeveloptool on a debian based Linux distribution, follow the instruction below:
Install build dependency:
sudo apt-get install libudev-dev libusb-1.0-0-dev dh-autoreconf
Clone the source code and build:
git clone https://github.com/rockchip-linux/rkdeveloptool cd rkdeveloptool autoreconf -i ./configure make
If you encounter compile error like below
./configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0' ./configure: line 4269: `PKG_CHECK_MODULES(LIBUSB1,libusb-1.0)'
You should install pkg-config libusb-1.0
sudo apt-get install pkg-config libusb-1.0
Then re-run
autoreconf -i ./configure make
Now you have rkdeveloptool executable at the current directory.
sudo cp rkdeveloptool /usr/local/bin/
MacOS
To build rkdeveloptool on macOS, you need homebrew(or similar package manager) to install required packages.
Install build dependency:
brew install automake autoconf libusb
Clone the source code and build:
git clone https://github.com/rockchip-linux/rkdeveloptool cd rkdeveloptool autoreconf -i ./configure make
If you encounter compile error like below
./configure: line 4269: syntax error near unexpected token `LIBUSB1,libusb-1.0' ./configure: line 4269: `PKG_CHECK_MODULES(LIBUSB1,libusb-1.0)'
You should install pkg-config libusb-1.0
brew install pkg-config
Then re-run
autoreconf -i ./configure make
Now you have rkdeveloptool executable at the current directory.
sudo cp rkdeveloptool /usr/local/bin/
Step 3: Testing connected and get help
On linux host:
$ rkdeveloptool ld
If you can see the information for device your connection is successful, if you want to get help you can type:
$ rkdeveloptool ?