Difference between revisions of "Rock/Hdmi Resolution"

Latest revision as of 07:27, 1 June 2015

Note:

1) the method is suit for rock pro, rock lite & rock2 square

2) the method is suit for Android & Linux

Step 1: Get the EDID parameter by tools

Note: There is just tool under windows, we will provide tool under linux Later

1) Download the tools here: http://dl.radxa.com/users/yao/sm_setup.exe

2 )Install sm_setup.exe, then run it (SoftMCCS)

3） Select your Display Mode, then choose "File->Save EDID as " and save the file as "Raylar EDID file (*.dat)", you can open and edit the dat file, you will see as below:

Step2: Parse the EDID file by tool (Phoenix)

you can download here http://dl.radxa.com/users/yao/Phoenix.zip run the tool, "File -> Open EDID..." to open the dat file saved by SoftMCCS

Select "Detailed Timings"

From the above picture, we can get these parameter needed by driver file.

"kernel/drivers/video/rockchip/hdmi/hdmi-lcdc.c"

/* name refresh xres yres pixclock h_bp h_fp v_bp v_fp h_pw v_pw polariry PorI flag vic 2ndvic pixelrepeat interface */

{ { "1440x900p@60Hz", 60, 1440, 900, 106500000, 232, 80, 25, 3, 152, 6, 0, 0, 0 }, 2, 0, 1, OUT_P888},

Note :

H = Horizontal, V = vertical

Pixel Clk: 106500000 (106.50MHz)

Resolution: xres=1440, yres=900.

h_fp = H sync Offset = 80

h_pw = H sync width = 152;

h_bp = H Blank - h_fp - h_pw = 464 - 80 - 152 = 232;

v_fp = V Sync Offset = 3

v_pw = V sync width = 6

v_bp = V Blank - v_fp -v_pw = 25

Add line like “1440x900p@60Hz....”use the parameter value above. (the other parameter can use like ""1440x900p@60Hz..." )

Then cd kernel, make clean and re-compile

Step 3: Flash the image, and set the resolution

Android:

you can set by Settings->Display->HDMI Mode

Linux:

#cat /sys/class/display/display0.HDMI/modes

1920x1080p-60

...

1440x900p-60

..

echo #echo 1440x900p-60 > /sys/class/display/display0.HDMI/mode

The above are the whole steps. we have serveral customers tested ok. but we can't make sure it is fitted for all.

Q&A

1) After set the new resolution, I found the refresh frequency is not the same as the setting. e.g. I set "1360x768@60Hz",the display shows "1360x768@46", what's the problem.

It caused by the pixclock changed by the system. The system will choose another value it think more suitable base on the pixclock you set on the "drivers/video/rockchip/hdmi/hdmi-lcdc.c", you can get the value for kernel log.

e.g.

I modify "1360x768@60Hz, pixclock = 85500000". in the "drivers/video/rockchip/hdmi/hdmi-lcdc.c", but the result shows on display is "1360x768@46Hz",

At last I found the pixclock clock the system used is "75000000" not "85500000" we set like the below message.

[ 119.205896] lcdc1: dclk:75000000>>fps:46

then how to fix this?

Use the pixclock "75000000" set by the system, adjusts the values of " h_fp,h_bp,h_pw. v_fp,v_bp,v_pw" to fit the formula

（xres + h_fp + h_bp + h_pw） x (yres + v_fp + v_bp + v_pw) * fps = pixclock. (the fps is refresh frequency value. e.g. 1360x768@60Hz, the fps = 60)

then update the value in the "drivers/video/rockchip/hdmi/hdmi-lcdc.c".

2）The resolution and fps are all right. but the screen shows mess

It caused by the values of "h_fp,h_bp,h_pw. v_fp,v_bp,v_pw" are not suitable, you can adjust them base on

（xres + h_fp + h_bp + h_pw） x (yres + v_fp + v_bp + v_pw) * fps = pixclock. and then update on the file

"drivers/video/rockchip/hdmi/hdmi-lcdc.c".

3）I can't found the resolution item after I add the new resolution in "drivers/video/rockchip/hdmi/hdmi-lcdc.c".

Make sure you execute "make clean" under kernel and re-compile.

Any question please send Email to support@radxa.com