|
|
Line 23: |
Line 23: |
| <div class="col-md-8"> | | <div class="col-md-8"> |
| | | |
− | == Quick Feature Comparison Table ==
| |
− |
| |
− | {| class="wikitable"
| |
− | |- style="text-align:center;"
| |
− | ! Raspberry Pi CM4
| |
− | ! Radxa ROCK3 CM
| |
− | |-
| |
− | | Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
| |
− | | Rockchip RK3566, Quad core Cortex-A55 (ARM v8) 64-bit SoC @ 2.0GHz
| |
− | |-
| |
− | | Small Footprint 55mm × 40mm × 4.7mm module
| |
− | | Small Footprint 55mm × 40mm × 4.7mm module
| |
− | |-
| |
− | | Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
| |
− | | Options for 1GB, 2GB, 4GB or 8GB LPDDR4-3200 SDRAM with ECC
| |
− | |-
| |
− | | Options for 0GB (CM4Lite), 8GB, 16GB, or 32GB eMMC Flash memory, Peak eMMC bandwidth 100MBytes/s
| |
− | | Options for 0GB, 8GB, 16GB, 32GB, 64GB, 128GB eMMC Flash memory, Peak eMMC bandwidth 250MBytes/s
| |
− | |-
| |
− | | Option for WiFi5/BT5
| |
− | | Option for WiFi5/BT5
| |
− | |-
| |
− | | Gigabit Ethernet PHY supporting IEEE 1588
| |
− | | Gigabit Ethernet PHY(RTL8211F), optional IEEE 1588 support
| |
− | |-
| |
− | | 1 × USB 2.0 port ( highspeed )
| |
− | | 1 × USB 2.0 port ( highspeed ), 1 x USB 3.0 port (5Gbps)
| |
− | |-
| |
− | | 1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )
| |
− | | 1 × PCIe 1-lane Host, Gen 2 ( 5Gbps )
| |
− | |-
| |
− | | N/A
| |
− | | 2 x SATA ports, one shared with USB 3, one shared with PCIe
| |
− | |-
| |
− | | 2 x HDMI 2.0(up to 4K60)
| |
− | | 1 x HDMI(up to 4K60)
| |
− | |-
| |
− | | MIPI DSI:<br />- 1 × 2-lane MIPI DSI display port<br />- 1 × 4-lane MIPI DSI display port
| |
− | | MIPI DSI:<br />- 2 × 4-lane MIPI DSI display port<br />- 1 x 4-lane LVDS support(shared with 1 x MIPI)
| |
− | |-
| |
− | |
| |
− | | eDP:<br />- 1 x eDP up to 4K60
| |
− | |-
| |
− | | MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
| |
− | | MIPI CSI-2:<br />- 1 × 2-lane MIPI CSI camera port<br />- 1 × 4-lane MIPI CSI camera port
| |
− | |-
| |
− | | 1 × SDIO 2.0 (CM4Lite only)
| |
− | | 1 x SDIO 3.0
| |
− | |-
| |
− | | N/A
| |
− | | Audio Codec
| |
− | |-
| |
− | | 28 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to 5 × UART<br />- Up to 5 × I2C<br />- Up to 5 × SPI<br />- 1 × SDIO interface<br />- 1 × DPI (Parallel RGB Display)<br />- 1 × PCM Up to<br />- 2× PWM channels<br />- Up to 3× GPCLK outputs
| |
− | | 50 × GPIO supporting either 1.8v or 3.3v signalling and peripheral options:<br />- Up to 8 × UART<br />- Up to 8 × I2C<br />- Up to 4 × SPI<br />- 1 × SDIO interface<br />- 1 × PCM<br />- Up to 8 × PWM channels<br /> - 2 x ADC
| |
− | |-
| |
− | | Single +5v PSU input
| |
− | | Single +5v PSU input
| |
− | |-
| |
− | | 2 x 100Pin B2B connector
| |
− | | 3 x 100Pin B2B connector
| |
− | |}
| |
| | | |
| </div> | | </div> |