Difference between revisions of "Rock3/Debian"
| Line 36: | Line 36: | ||
The preinstalled Desktop is xfce4. | The preinstalled Desktop is xfce4. | ||
| + | === Install and update necessary packages === | ||
| + | |||
| + | Add Radxa APT, see [[rock3/radxa-apt | Radxa APT]]. | ||
| + | |||
| + | Install packages; | ||
| + | |||
| + | $ sudo apt-get update | ||
| + | $ sudo apt-get install -y rockchip-overlay | ||
| + | $ sudo apt-get install -y linux-4.4-rock-3-latest | ||
| + | |||
| + | === Network Connection === | ||
| + | |||
| + | There are two methods for network connection. One is Ethernet and the other is WIFI. | ||
| + | ==== Ethernet Connection ==== | ||
| + | You can use a network cable (one end connected to the external network port or route) to connect your ROCK 3 to the network. The ROCK 3 will automatically configure the network for your surfing on the Internet. | ||
| + | |||
| + | ===== To test the Ethernet, we need to follow the steps: ===== | ||
| + | |||
| + | * Check whether the Ethernet is normal by command, '''ifconfig''', which would show us a network card, eth0, and the Ethernet IP address. Also, use tool, ping, to connect to a normal domain. | ||
| + | |||
| + | $ ifconfig | ||
| + | $ ping www.baidu.com | ||
| + | |||
| + | * If failed to connect to a normal domain. , try | ||
| + | |||
| + | $ sudo dhclient eth0 | ||
| + | |||
| + | ==== WIFI Connection ==== | ||
| + | When there is not a network cable for your ROCK Pi N10 the WIFI connection is another good choice. ROCK Pi N10 supports 2.4G/5G WIFI wireless network. | ||
Revision as of 07:47, 17 August 2021
ROCK 3 > Debian
Contents
Work with ROCK 3 Debian
Introduction to ROCK Pi N10 Debian
ROCK 3 Debian is an easy to use desktop system. While working with ROCK 3 Debian, you will find it do well on playing music, Internet, Bluetooth, AI and so on.
ROCK 3 Debian uses systemd to manage system.
Command prepended by $ means the command may be executed by an unprivileged user. And command prepended by # means the command may be executed by an privileged user. But the symbol, $ or #, is not part of the command.
Access from the Host PC/Laptop
Option 1: Serial console
Check Serial Console
Option 2: SSH
SSH server is enabled on port 22 of ROCK 3 default image.
Please use angryip or use this command "ifconfig" by serial console to find your board IP address.
$ ping ip-of-device $ ssh linaro@ip-of-device
Debian Default User Account
Non-root User:
User Name : linaro Password : linaro
Desktop
The preinstalled Desktop is xfce4.
Install and update necessary packages
Add Radxa APT, see Radxa APT.
Install packages;
$ sudo apt-get update $ sudo apt-get install -y rockchip-overlay $ sudo apt-get install -y linux-4.4-rock-3-latest
Network Connection
There are two methods for network connection. One is Ethernet and the other is WIFI.
Ethernet Connection
You can use a network cable (one end connected to the external network port or route) to connect your ROCK 3 to the network. The ROCK 3 will automatically configure the network for your surfing on the Internet.
To test the Ethernet, we need to follow the steps:
- Check whether the Ethernet is normal by command, ifconfig, which would show us a network card, eth0, and the Ethernet IP address. Also, use tool, ping, to connect to a normal domain.
$ ifconfig $ ping www.baidu.com
- If failed to connect to a normal domain. , try
$ sudo dhclient eth0
WIFI Connection
When there is not a network cable for your ROCK Pi N10 the WIFI connection is another good choice. ROCK Pi N10 supports 2.4G/5G WIFI wireless network.