Difference between revisions of "RockpiE/hardware/rockpiE"
(→General purpose input-output (GPIO) connector) |
|||
| Line 218: | Line 218: | ||
| 27|| || ||SPDIF_TX_M0 ||GPIO0_D3 || style="background:green; color:white"|19 || ||style="background:black; color:white"|20 || GND || || || || | | 27|| || ||SPDIF_TX_M0 ||GPIO0_D3 || style="background:green; color:white"|19 || ||style="background:black; color:white"|20 || GND || || || || | ||
|- | |- | ||
| − | | 83|| CARD_CLK_M1 || PDM_SDI0_M0|| I2S1_SDI || GPIO2_C3 || style="background:green; color:white"|21 || || style="background:green; color:white"|22 || GPIO2_B4 || | + | | 83|| CARD_CLK_M1 || PDM_SDI0_M0|| I2S1_SDI || GPIO2_C3 || style="background:green; color:white"|21 || || style="background:green; color:white"|22 || GPIO2_B4 || || || || 76 |
|- | |- | ||
| 60|| || || CLK32KOUT_M1 || GPIO1_D4 || style="background:green; color:white"|23 || || style="background:green; color:white"|24 || GPIO2_A3 || EFUSE_PWREN || || || 67 | | 60|| || || CLK32KOUT_M1 || GPIO1_D4 || style="background:green; color:white"|23 || || style="background:green; color:white"|24 || GPIO2_A3 || EFUSE_PWREN || || || 67 | ||
Revision as of 10:05, 3 June 2020
ROCK Pi E > Hardware > Main Board
Contents
This hardware user manual provides information about the features and signals available on ROCK Pi E board.
Hardware version
ROCK Pi E board comes with different versions. When you get the board, you need to know the hardware version like 'ROCK Pi E V11', which is printed in the top side of the board.
Also, you need to know the ROCK Pi E Models and SKU, like 'D16W2P'.
Power supply
ROCK Pi E uses the USB Type-C port for power supply.
If you want to power ROCK Pi E standalone, you can use 5V/2A power adapter with USB Type-C ports. You can also use the USB PD/QC power adapter without worrying damage the board because the PD/QC adapter will detect ROCK Pi S only supports 5V so the adapter will output 5V.
When you use PoE function provided by ROCK Pi E, you may power ROCK Pi E by putting DV +5V directly to PIN#2 of 26-PIN HEADER. GND pin like PIN#9 is also necessary.
Processor
The Rockchip RK3328 Soc used in ROCK Pi E is a high-performance Quad-core Cortex-A53 application processor. It has Neon and FPU coprocessor, shared L2 cache, GPU and so on.
RK3328 Soc can run at 1.3 GHz CPU clock speed.
RAM
ROCK Pi E RAM: 256MB / 512MB / 1GB / 2GB DDR3
Audio
The ROCK Pi E is equipped with a standard 3.5mm jack. An audio lead is necessary to produce sound. Audio can be played through speakers or headphones using jack.
Keys
The ROCK Pi E Board presents two keys, Reset key and Maskrom key.
The Reset key serves as the hardware reset button. Short press the button to reboot the system.
The Maskrom key is for firmware flash/upgrade.
LED
ROCK Pi E has Power LED and User LED.
- Power LED
Green Power LED is always on and couldn't be controlled by software.
- User LED
User LED is blue, which can be configured by sysfs.
The related directory is /sys/class/leds/rockpie:user
By default, its blink status shows the running kernel.
Networking
Ethernet
On the ROCK Pi E board, the 100Mbit and Gigabit Ethernet port are provided.
Two LEDs are built into the RJ-45 LAN connector. This table describes the LED states when the board is powered up and the LAN subsystem is operating.
| LED | LED Color | Led State | Condition |
|---|---|---|---|
| Link | Green | Off On |
LAN link is not established. LAN link is established. |
| Data Rate | Yellow | Blinking Off |
There is activity on this port. No link is established. |
PoE
PoE connector is divided into two groups, Group 1 and Group2.
WiFi
ROCK Pi E is equipped with RTL8723DU (Wlan 2.4GHz 802.11bgn and Bluetooth 4.2) or RTL8821CU (Wlan 2.4GHz 802.11 ac/abgn and Bluetooth 4.2) chip.
To gain a stronger signal, you need an antenna attached to the antenna socket on board.
Storage
eMMC
eMMC Socket on Board Interface Feature
The high performance eMMC module is the best choice as the system storage for ROCK Pi E. The eMMC module with 8GB/16GB/32GB/64GB/128GB is available.
The eMMC Socket pin specification shows below.
| Name | Pin# | Pin# | Name | |
|---|---|---|---|---|
| GND | 1 | 34 | GND | |
| EMMC_D5 | 2 | 33 | EMMC_D6 | |
| GND | 3 | 32 | GND | |
| EMMC_D4 | 4 | 31 | EMMC_D7 | |
| GND | 5 | 30 | GND | |
| EMMC_D0 | 6 | 29 | EMMC_D1 | |
| GND | 7 | 28 | GND | |
| EMMC_CLK | 8 | 27 | EMMC_D2 | |
| GND | 9 | 26 | GND | |
| EMMC_D3 | 10 | 25 | EMMC_CMD | |
| GND | 11 | 24 | GND | |
| EMMC_RSTN | 12 | 23 | VCC3V3_SYS | |
| GND | 13 | 22 | VCC3V3_SYS | |
| GND | 14 | 21 | VCC_1V8 | |
| EMMC_RCLK | 15 | 20 | VCC_1V8 | |
| GND | 16 | 19 | GND | |
| GND | 17 | 18 | GND |
TF card/Micro SD
TF Card Interface
The TF card can be used as a system storage or an external storage. When it's used as a system storage, you had better choose the ones with storage space larger than 8GB. When it's used as an external storage, you can choose the ones with storage space up to 128GB. When the TF card is inserted into the TF card slot , the device will be automatically recognized by the system.
The TF card interface pin specification shows below.
| Pin# | Name |
|---|---|
| 1 | SDMMC0_D2 |
| 2 | SDMMC0_D3 |
| 3 | SDMMC0_CMD |
| 4 | VCC3V3_SYS |
| 5 | SDMMC0_CLK |
| 6 | GND |
| 7 | SDMMC0_D0 |
| 8 | SDMMC0_D1 |
| 9 | SDMMC0_DET_L |
| 10 | GND |
| 11 | GND |
| 12 | GND |
| 13 | GND |
USB
The ROCK Pi E has one USB 3.0 Type-A host port
The ROCK Pi E may be operated with any generic USB computer keyboard and mouse. It may also be used with USB storage, USB to MIDI converters, and virtually any other device/component with USB capabilities.
General purpose input-output (GPIO) connector
ROCK Pi E has one 40-pin expansion header. Each pin is distinguished by color.
Hardware V1.0/V1.1
40-pin Header
| GPIO number | Func4 | Func3 | Func2 | Func1 | Pin# | Pin# | Func1 | Func2 | Func3 | Func4 | GPIO number | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| +3.3V | 1 | 2 | +5.0V | |||||||||
| 68 | I2C1_SDA | GPIO2_A4 | 3 | 4 | +5.0V | |||||||
| 69 | I2C1_SCL | GPIO2_A5 | 5 | 6 | GND | |||||||
| 100 | UART1_TX | SDMMC0EXT_D0 | TSP_D0 | GPIO3_A4 | 7 | 8 | GPIO2_A0 | UART2_TX_M1 | 64 | |||
| GND | 9 | 10 | GPIO2_A1 | UART2_RX_M1 | 65 | |||||||
| 96 | SPI_CLK_M2 | SDMMC0EXT_CMD | TSP_VALID | GPIO3_A0 | 11 | 12 | GPIO2_D2 | 90 | ||||
| 104 | SPI_CSN0_M2 | TSP_D4 | GPIO3_B0 | 13 | 14 | GND | ||||||
| 98 | SPI_RXD_M2 | SDMMC0EXT_CLK | TSP_CLK | GPIO3_A2 | 15 | 16 | USB20DM | |||||
| +3.3V | 17 | 18 | USB20DP | |||||||||
| 27 | SPDIF_TX_M0 | GPIO0_D3 | 19 | 20 | GND | |||||||
| 83 | CARD_CLK_M1 | PDM_SDI0_M0 | I2S1_SDI | GPIO2_C3 | 21 | 22 | GPIO2_B4 | 76 | ||||
| 60 | CLK32KOUT_M1 | GPIO1_D4 | 23 | 24 | GPIO2_A3 | EFUSE_PWREN | 67 | |||||
| GND | 25 | 26 | GPIO2_C7 | I2S1_SDO | PDM_FSYNC_M0 | 87 | ||||||
| 97 | SPI_TXD_M2 | SDMMC0EXT_DET | TSP_FAIL | GPIO3_A1 | 27 | 28 | GPIO2_C1 | I2S1_LRCK_TX | SPDIF_TX_M1 | TSP_D6_M1 | 81 | |
| 80 | TSP_D5_M1 | I2S1_LRCK_RX | GPIO2_C0 | 29 | 30 | GND | ||||||
| 79 | TSP_SYNC_M1 | I2S1_MCLK | GPIO2_B7 | 31 | 32 | GPIO3_A6 | TSP_D2 | SDMMC0EXT_D2 | UART1_RX | 102 | ||
| 82 | TSP_D7_M1 | PDM_CLK_M0 | I2S1_SCLK | GPIO2_C2 | 33 | 34 | GND | |||||
| ADC_IN1 | 35 | 36 | GPIO2_C5 | I2S1_SDIO2 | PDM_SDI2_M0 | CARD_DET_M1 | 85 | |||||
| 66 | IR_RX | GPIO2_A2 | 37 | 38 | GPIO2_C4 | 2S1_SDIO1 | PDM_SDI1_M0 | CARD_RST_M1 | 84 | |||
| GND | 39 | 40 | GPIO2_C6 | I2S1_SDIO3 | PDM_SDI3_M0 | CARD_IO_M1 | 86 |
More details about 40-pin Header
- Pin#12(GPIO2_D2) is also the sleep pin of PMIC RK805. Be careful when you try to control it.
- Pin#3 and Pin#5 are only for I2C communication.
- Pins marked with color orange are designed for debug console.
- SPI: x1, SPI0(Pin#11/13/15/27)
- I2C: x1, I2C1
- UART: x1, UART1 and UART2
- USB: USB20DM(Pin#16) and USB20DP(Pin#18)
- PDM: x1
- I2S: x1, I2S1