Difference between revisions of "Rock/hardware revision"
< Rock
| Line 15: | Line 15: | ||
== Revision 2013.10.25 == | == Revision 2013.10.25 == | ||
| − | This is the first MP version of radxa rock, which fixed all the known issue on the 2013.08.12 revision. Since the position of the HDMI connector is moved a little bit. Some cases of this revision can not be used on previous revision, except the very simple case. | + | This is the first MP version of radxa rock, which fixed all the known issue on the 2013.08.12 revision. Since the position of the HDMI connector is moved a little bit. Some cases of this revision can not be used on previous revision, except the very simple case. The software are the same with previous revisions. |
| + | |||
| + | === Download === | ||
| + | * [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_schematic_20131025.pdf Schematic(.pdf)] | ||
| + | * [http://dl.radxa.com/rock/docs/hw/RADXA_ROCK_20131025.dxf Dimension file(.dxf)] | ||
| + | * Components position reference [http://dl.radxa.com/rock/docs/hw/componets_position_ref_bottom_20131025.pdf top] [http://dl.radxa.com/rock/docs/hw/componets_position_ref_bottom_20131025.pdf bottom] | ||
Revision as of 06:26, 21 December 2013
This page describe the difference in hardware of all rock hardware revisions.
Revision 2013.08.12
The first batch of radxa rock samples, also called radxa rock engineering samples, only 100pcs are made(Limited Edition :). Almost everything work fine on this revision. However there is still some small issue such as
- The HDMI connector is too close to the SPDIF jack, may conflict with some big header of the HDMI cable
- The UART can be damaged sometimes by some 5V TTL to USB cable
- The reset key is acted as POWER halt function, rebooting the board need to press the reset key and then the power key.
Download
Revision 2013.10.25
This is the first MP version of radxa rock, which fixed all the known issue on the 2013.08.12 revision. Since the position of the HDMI connector is moved a little bit. Some cases of this revision can not be used on previous revision, except the very simple case. The software are the same with previous revisions.
Download
- Schematic(.pdf)
- Dimension file(.dxf)
- Components position reference top bottom