Difference between revisions of "Rockpi4/dev/u-boot/pxe"
(→Step 2: run pxe boot cammand) |
(→Diskless start) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 193: | Line 193: | ||
and now,your kernel is booting up | and now,your kernel is booting up | ||
| + | |||
| + | ==Diskless start== | ||
| + | Diskless startup means that the operating system can be started without a disk (EMMC or sdcard or nvme). Diskless startup usually uses the DHCP, TFTP and NFS functions of uboot, | ||
| + | This time, we will use another way to realize diskless startup. We will combine '''PXE of network card''' with '''NFS of uboot''' to realize diskless startup. | ||
| + | |||
| + | ===You nead to prepare=== | ||
| + | *1. rockpi4; | ||
| + | *2. server host (ubuntu); | ||
| + | *3. Ethernet Cable; | ||
| + | *4. Serial port line; | ||
| + | |||
| + | |||
| + | ===How to do=== | ||
| + | 1. Download '''uboot''' to [https://wiki.radxa.com/Rockpi4/dev/spi-install SPI flash] on rockpi4;<br> | ||
| + | 2. Install '''TFTP''' and '''NFS''' server on the server host(PC):<br/> | ||
| + | (1). '''NFS''' server installation: | ||
| + | xxx@xxx:~$ sudo apt-get install nfs-kernel-server | ||
| + | xxx@xxx:~$ mkdir -p /home/xxx/nfs_rootfs | ||
| + | xxx@xxx:~$ sudo vim /etc/exports | ||
| + | /home/xxx/nfs_rootfs *(rw,nohide,insecure,no_subtree_check,async,no_root_squash) | ||
| + | xxx@xxx:~$ sudo service nfs-kernel-server restart #Restart service | ||
| + | xxx@xxx:~$ sudo mount -t nfs 127.0.0.1:/home/xxx/nfs_rootfs /mnt #Test services for NFS | ||
| + | |||
| + | (2). '''TFTP''' server installation: | ||
| + | xxx@xxx:~$ sudo apt-get install tftp-hpa tftpd-hpa | ||
| + | xxx@xxx:~$ mkdir -p /home/xxx/tftpboot | ||
| + | xxx@xxx:~$ chmod 777 /home/xxx/tftpboot | ||
| + | xxx@xxx:~$ sudo vim /etc/default/tftpd-hpa | ||
| + | TFTP_DIRECTORY="/home/xxx/tftpboot" | ||
| + | TFTP_OPTIONS="-l -c -s" | ||
| + | xxx@xxx:~$ sudo service tftpd-hpa restart #Restart service | ||
| + | |||
| + | 3. Put the '''kernel and DTB''' in the '''TFT''' directory, and extract the '''root file system''' to the '''NFS''' directory. The operation is as follows:<br/> | ||
| + | (1). '''Update''' the kernel in Debian of rockpi4: | ||
| + | root@linaro-alip:~# apt-get update | ||
| + | root@linaro-alip:~# apt install linux-4.4-latest -y | ||
| + | ... | ||
| + | Setting up linux-headers-4.4.154-110-rockchip-gcef30e88a9f5 (4.4.154-110-rockchip) ... | ||
| + | Setting up linux-4.4-latest (4.4.154-110-rockchip) ... | ||
| + | root@linaro-alip:~# | ||
| + | |||
| + | (2). '''Copy''' the latest kernel and other files in the boot directory of Debian (you need to update the kernel to version 110): | ||
| + | |||
| + | root@linaro-alip:/boot# cp * /media/linaro/1877-4F6E/boot/ -r #This is my U stick | ||
| + | |||
| + | (3). In the server (PC), copy all files in the boot directory of the U disk to the **TFTP Directory**: | ||
| + | |||
| + | xxx@xxx:/data/tftp_server$ cp /media/yulingle/1877-4F6E/boot/* . -r | ||
| + | |||
| + | (4). '''Create''' a configuration file for PXE to read: | ||
| + | xxx@xxx:/data/tftp_server$ mkdir pxelinux.cfg | ||
| + | xxx@xxx:/data/tftp_server$ cd pxelinux.cfg/ | ||
| + | xxx@xxx:/data/tftp_server/pxelinux.cfg$ cp ../extlinux/extlinux.conf . | ||
| + | xxx@xxx:/data/tftp_server/pxelinux.cfg$ vim 01-d2-13-dc-b9-d4-10 #The physical address of the network card can be obtained by entering **print ehaddr** in the command line of **uboot** | ||
| + | timeout 10 | ||
| + | menu title select kernel | ||
| + | |||
| + | label kernel-4.4.154-110-rockchip-gcef30e88a9f5 | ||
| + | kernel /vmlinuz-4.4.154-110-rockchip-gcef30e88a9f5 | ||
| + | devicetreedir /dtbs/4.4.154-110-rockchip-gcef30e88a9f5 | ||
| + | initrd initrd.img-4.4.154-110-rockchip-gcef30e88a9f5 | ||
| + | append earlyprintk console=ttyFIQ0,1500000n8 init=/sbin/init root=/dev/nfs rw nfsroot=192.168.2.181:/home/xxx/nfs_rootfs,v3 ip=192.168.2.244:192.168.2.181:192.168.2.1:255.255.255.0:xxx::off | ||
| + | rootwait | ||
| + | #The contant of 01-d2-13-dc-b9-d4-10 file can copy from pxelinux.cfg/extlinux.conf | ||
| + | #192.168.2.181 is IP of server. | ||
| + | #/home/xxx/nfs_rootfs is the directory where the root file system resides. | ||
| + | #v3 is version number of nfs. | ||
| + | #xxx is hostname of your server host. | ||
| + | #192.168.2.1 is gateway. | ||
| + | |||
| + | (5). Next, '''unzip''' the root file system to the NFS directory:<br/> | ||
| + | Unzip the file system: | ||
| + | $ tar -xzf linaro-stretch-alip-20200623-1.tar.gz -C /home/xxx/ #After unzipping, you will get the binary folder. | ||
| + | $ mv binary nfs_rootfs #nfs_rootfs is the directory name specified in the /etc/exports file. | ||
| + | '''linaro-stretch-alip-20200623-1.tar.gz''' The creation of the root file system can refer to [https://wiki.radxa.com/Rockpi4/dev/Debian here]. | ||
| + | |||
| + | 4、Start rockpi4, enter the uboot command line, and '''set IP''': | ||
| + | => setenv ipaddr xx.xx.xx.xx | ||
| + | => setenv serverip xx.xx.xx.xx #The IP address of rockpi4 and server must be in the same network segment. | ||
| + | |||
| + | '''Using PXE'''： | ||
| + | => pxe get | ||
| + | => pxe boot | ||
| + | |||
| + | |||
| + | 5、When the kernel is '''started successfully''' and the NFS file system is mounted, the following is displayed: | ||
| + | Starting Update UTMP about System Runlevel Changes... | ||
| + | [ OK ] Started Update UTMP about System Runlevel Changes. | ||
| + | [ 27.195702] tty_port_close_start: tty->count = 1 port count = 2. | ||
| + | |||
| + | Debian GNU/Linux 9 linaro-alip ttyFIQ0 | ||
| + | |||
| + | linaro-alip login: root (automatic login) | ||
| + | |||
| + | Linux linaro-alip 4.4.154-110-rockchip-gcef30e88a9f5 #1 SMP Mon Jun 22 07:37:10 UTC 2020 aarch64 | ||
| + | |||
| + | The programs included with the Debian GNU/Linux system are free software; | ||
| + | the exact distribution terms for each program are described in the | ||
| + | individual files in /usr/share/doc/*/copyright. | ||
| + | |||
| + | Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | ||
| + | permitted by applicable law. | ||
| + | root@linaro-alip:~# | ||
| + | root@linaro-alip:~# | ||
| + | root@linaro-alip:~# | ||
| + | root@linaro-alip:~# | ||
Latest revision as of 06:58, 29 June 2020
ROCK Pi 4 > Development > U-boot > PXE BOOT
PXE boot, Preboot eXecution Environment is a specification describes a standardized client-server environment that boots a software assembly, retrieved from a network. U-boot of ROCK Pi 4 supports PXE boot and it's enabled by default. This page describe how to use PXE boot on ROCK Pi 4.
Contents
Server setting
this document is used tftp server to test pxe boot to ramdisk,next,we will instruct on installing and configuring the tftp server in ubuntu 16.04LTS,and preparing some boot files.
Step 1: Install TFTP and TFTP server
sudo apt-get install tftp-hpa tftpd-hpa
Step 2: Configure TFTP server
1.Create a folder,like this:
mkdir /data/tftp_server
2.modify configuration file,like this:
$ cat /etc/default/tftpd-hpa # /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/data/tftp_server" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="-l -c -s"
Step 3: Restart tftp
service tftpd-hpa restart
Step 4:Preparing boot file
copy all files from debian os boot partition,as follows:
#:/data/tftp_server$ tree . ├── config-4.4.154-88-rockchip-00030-g90239a6 //copy from debian ├── dtbs //.dtb file,we need rockpi-4b-linux.dtb,copy from debian │ └── 4.4.154-88-rockchip-00030-g90239a6 │ └── rockchip │ ├── ficus-linux.dtb │ ├── px30-evb-ddr3-lvds-v10.dtb . . . │ └── rockpi-4b-linux.dtb ├── extlinux //copy from debian │ ├── extlinux.conf ├── hw_intfc.conf //copy from debian ├── initrd.img-4.4.154-88-rockchip-00030-g90239a6 //ramdisk,copy from debian ├── overlays //.dtbo files,copy from debian │ ├── at24c02.dtbo │ ├── console-on-ttyS2.dtbo │ ├── console-on-ttyS4.dtbo . . . │ ├── spi1-waveshare35c.dtbo │ └── two-color-led.dtbo ├── pxelinux.cfg //this folder is important,you can make the folder by yourself │ ├── 01-be-73-e6-4e-04-2b //named it by env ethaddr of uboot.i will introduce this file │ └── extlinux.conf └── vmlinuz-4.4.154-88-rockchip-00030-g90239a6 //this is a kernel image,copy from debian or build by yourself
Pxelinux.cfg
named pxe configaration file,run to uboot and print ethaddr:
...
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net: eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'): 0
=> print ethaddr
ethaddr=be:73:e6:4e:04:2b
so i named my pxe configaration file 01-be-73-e6-4e-04-2b,or you can named it default
:/data/tftp_server/pxelinux.cfg$ cat 01-be-73-e6-4e-04-2b
label kernel-4.4.154-88-rockchip-00030-g90239a6
kernel /vmlinuz-4.4.154-88-rockchip-00030-g90239a6 //choose your kernel image
devicetreedir /dtbs/4.4.154-88-rockchip-00030-g90239a6 //choose your dtb folder
initrd initrd.img-4.4.154-88-rockchip-00030-g90239a6 //choose your ramdisk
append earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m earlyprintk console=ttyFIQ0,1500000n8 rw root=PARTUUID=b921b045-1d rootfstype=ext4 init=/sbin/init rootwait //this is bootargs for kernel
Rock Pi 4
we must install uboot on spi flash or emmc or microSD,this document is used spi flash,so please see spi-install to install uboot in spi flash
Step 1: Configure ip addr
enter uboot,and set some env:
=> setenv ipaddr xx.xx.xx.xx //set rockpi4 ip => setenv serverip xx.xx.xx.xx //set ip of tftp
Step 2: run pxe boot cammand
when you run pxe cammand,uboot will get some boot files from your tftp server.as follows:
=>pxe get
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/01-be-73-e6-4e-04-2b
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.2.140; our IP address is 192.168.2.205
Filename 'pxelinux.cfg/01-be-73-e6-4e-04-2b'.
Load address: 0x600000
Loading: #
391.6 KiB/s
done
Bytes transferred = 401 (191 hex)
Config file found
=>pxe boot
missing environment variable: bootfile
Retrieving file: /hw_intfc.conf
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.2.140; our IP address is 192.168.2.205
Filename '/hw_intfc.conf'.
Load address: 0x700000
Loading: #
840.8 KiB/s
done
Bytes transferred = 1722 (6ba hex)
dtoverlay number: 0, name:/overlays/console-on-ttyS2.dtbo
hw_conf.valid = 1
hw_conf.pwm0 = 0
hw_conf.pwm1 = 0
hw_conf.uart2 = 0
hw_conf.uart4 = 0
hw_conf.spi1 = 0
hw_conf.spi2 = 0
hw_conf.i2c2 = 0
hw_conf.i2c6 = 0
hw_conf.i2c7 = 0
hw_conf.dts_overlay_count = 1
hw_conf.dts_overlay[0] = /overlays/console-on-ttyS2.dtbo
1: kernel-4.4.154-88-rockchip-00030-g90239a6
missing environment variable: bootfile
Retrieving file: initrd.img-4.4.154-88-rockchip-00030-g90239a6
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.2.140; our IP address is 192.168.2.205
Filename 'initrd.img-4.4.154-88-rockchip-00030-g90239a6'.
Load address: 0xa200000
Loading: ########......
##################
5.2 MiB/s
done
Bytes transferred = 4072215 (3e2317 hex)
missing environment variable: bootfile
Retrieving file: /vmlinuz-4.4.154-88-rockchip-00030-g90239a6
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.2.140; our IP address is 192.168.2.205
Filename '/vmlinuz-4.4.154-88-rockchip-00030-g90239a6'.
Load address: 0x280000
Loading: ################# ......
########################
5 MiB/s
done
Bytes transferred = 19427336 (1287008 hex)
append: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m earlyprintk console=ttyFIQ0,1500000n8 rw root=PARTUUID=b921b045-1dt
missing environment variable: bootfile
Retrieving file: /dtbs/4.4.154-88-rockchip-00030-g90239a6/rockchip/rockpi-4b-linux.dtb
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.2.140; our IP address is 192.168.2.205
Filename '/dtbs/4.4.154-88-rockchip-00030-g90239a6/rockchip/rockpi-4b-linux.dtb'.
Load address: 0x8300000
Loading: #######
5 MiB/s
done
Bytes transferred = 93561 (16d79 hex)
fdt addr 0000000008300000
fdt magic number edfe0dd0
fdt size 1048576
merge_dts_overlay
missing environment variable: bootfile
Retrieving file: /overlays/console-on-ttyS2.dtbo
Speed: 1000, full duplex
Using ethernet@fe300000 device
TFTP from server 192.168.2.140; our IP address is 192.168.2.205
Filename '/overlays/console-on-ttyS2.dtbo'.
Load address: 0x8200000
Loading: #
755.9 KiB/s
done
Bytes transferred = 774 (306 hex)
overlay dtb(0x0000000008200000) is valid
fdt_overlay_apply 0000000008300000 0000000008200000
## Flattened Device Tree blob at 08300000
Booting using the fdt blob at 0x8300000
Loading Ramdisk to e99e3000, end e9dc5317 ... OK
Loading Device Tree to 00000000e98e0000, end 00000000e99e2fff ... OK
Adding bank: 0x00200000 - 0xf8000000 (size: 0xf7e00000)
Total: 717296.593 ms
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
and now,your kernel is booting up
Diskless start
Diskless startup means that the operating system can be started without a disk (EMMC or sdcard or nvme). Diskless startup usually uses the DHCP, TFTP and NFS functions of uboot, This time, we will use another way to realize diskless startup. We will combine PXE of network card with NFS of uboot to realize diskless startup.
You nead to prepare
- 1. rockpi4;
- 2. server host (ubuntu);
- 3. Ethernet Cable;
- 4. Serial port line;
How to do
1. Download uboot to SPI flash on rockpi4;
2. Install TFTP and NFS server on the server host(PC):
(1). NFS server installation:
xxx@xxx:~$ sudo apt-get install nfs-kernel-server xxx@xxx:~$ mkdir -p /home/xxx/nfs_rootfs xxx@xxx:~$ sudo vim /etc/exports /home/xxx/nfs_rootfs *(rw,nohide,insecure,no_subtree_check,async,no_root_squash) xxx@xxx:~$ sudo service nfs-kernel-server restart #Restart service xxx@xxx:~$ sudo mount -t nfs 127.0.0.1:/home/xxx/nfs_rootfs /mnt #Test services for NFS
(2). TFTP server installation:
xxx@xxx:~$ sudo apt-get install tftp-hpa tftpd-hpa xxx@xxx:~$ mkdir -p /home/xxx/tftpboot xxx@xxx:~$ chmod 777 /home/xxx/tftpboot xxx@xxx:~$ sudo vim /etc/default/tftpd-hpa TFTP_DIRECTORY="/home/xxx/tftpboot" TFTP_OPTIONS="-l -c -s" xxx@xxx:~$ sudo service tftpd-hpa restart #Restart service
3. Put the kernel and DTB in the TFT directory, and extract the root file system to the NFS directory. The operation is as follows:
(1). Update the kernel in Debian of rockpi4:
root@linaro-alip:~# apt-get update root@linaro-alip:~# apt install linux-4.4-latest -y ... Setting up linux-headers-4.4.154-110-rockchip-gcef30e88a9f5 (4.4.154-110-rockchip) ... Setting up linux-4.4-latest (4.4.154-110-rockchip) ... root@linaro-alip:~#
(2). Copy the latest kernel and other files in the boot directory of Debian (you need to update the kernel to version 110):
root@linaro-alip:/boot# cp * /media/linaro/1877-4F6E/boot/ -r #This is my U stick
(3). In the server (PC), copy all files in the boot directory of the U disk to the **TFTP Directory**:
xxx@xxx:/data/tftp_server$ cp /media/yulingle/1877-4F6E/boot/* . -r
(4). Create a configuration file for PXE to read:
xxx@xxx:/data/tftp_server$ mkdir pxelinux.cfg xxx@xxx:/data/tftp_server$ cd pxelinux.cfg/ xxx@xxx:/data/tftp_server/pxelinux.cfg$ cp ../extlinux/extlinux.conf . xxx@xxx:/data/tftp_server/pxelinux.cfg$ vim 01-d2-13-dc-b9-d4-10 #The physical address of the network card can be obtained by entering **print ehaddr** in the command line of **uboot** timeout 10 menu title select kernel label kernel-4.4.154-110-rockchip-gcef30e88a9f5 kernel /vmlinuz-4.4.154-110-rockchip-gcef30e88a9f5 devicetreedir /dtbs/4.4.154-110-rockchip-gcef30e88a9f5 initrd initrd.img-4.4.154-110-rockchip-gcef30e88a9f5 append earlyprintk console=ttyFIQ0,1500000n8 init=/sbin/init root=/dev/nfs rw nfsroot=192.168.2.181:/home/xxx/nfs_rootfs,v3 ip=192.168.2.244:192.168.2.181:192.168.2.1:255.255.255.0:xxx::off rootwait #The contant of 01-d2-13-dc-b9-d4-10 file can copy from pxelinux.cfg/extlinux.conf #192.168.2.181 is IP of server. #/home/xxx/nfs_rootfs is the directory where the root file system resides. #v3 is version number of nfs. #xxx is hostname of your server host. #192.168.2.1 is gateway.
(5). Next, unzip the root file system to the NFS directory:
Unzip the file system:
$ tar -xzf linaro-stretch-alip-20200623-1.tar.gz -C /home/xxx/ #After unzipping, you will get the binary folder. $ mv binary nfs_rootfs #nfs_rootfs is the directory name specified in the /etc/exports file.
linaro-stretch-alip-20200623-1.tar.gz The creation of the root file system can refer to here.
4、Start rockpi4, enter the uboot command line, and set IP:
=> setenv ipaddr xx.xx.xx.xx => setenv serverip xx.xx.xx.xx #The IP address of rockpi4 and server must be in the same network segment.
Using PXE：
=> pxe get => pxe boot
5、When the kernel is started successfully and the NFS file system is mounted, the following is displayed:
Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. [ 27.195702] tty_port_close_start: tty->count = 1 port count = 2. Debian GNU/Linux 9 linaro-alip ttyFIQ0 linaro-alip login: root (automatic login) Linux linaro-alip 4.4.154-110-rockchip-gcef30e88a9f5 #1 SMP Mon Jun 22 07:37:10 UTC 2020 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@linaro-alip:~# root@linaro-alip:~# root@linaro-alip:~# root@linaro-alip:~#