Difference between revisions of "Rockpi4/hardware/devtree overlays"
(→Loading hardware module) |
|||
| (10 intermediate revisions by 2 users not shown) | |||
| Line 2: | Line 2: | ||
{{Languages|rockpi4/hardware/devtree_overlays | Device Tree Overlays}} | {{Languages|rockpi4/hardware/devtree_overlays | Device Tree Overlays}} | ||
| − | [[rockpi4 | ROCK Pi 4]] > [[rockpi4/hardware | Hardware]] > [[rockpi4/hardware/devtree_overlays | Device Tree Overlays]] | + | [[rockpi4 | ROCK Pi 4]] > [[rockpi4/hardware | Hardware]] > [[rockpi4/hardware/devtree_overlays | Device Tree Overlays Linux 4.4]] |
| − | + | ||
=== Device Tree Overlays=== | === Device Tree Overlays=== | ||
| Line 23: | Line 22: | ||
In /boot/overlays you will find many .dtbo files. The loader will merge the | In /boot/overlays you will find many .dtbo files. The loader will merge the | ||
selected .dtbo files by reading file /boot/hw_intfc.conf. | selected .dtbo files by reading file /boot/hw_intfc.conf. | ||
| + | |||
| + | File hw_intfc.conf also can be found in [[https://github.com/radxa/rockchip-bsp SDK rockchip-bsp]] directory, rockchip-bsp/kernel/arch/arm64/boot/dts/rockchip/overlays/ | ||
====File Structure==== | ====File Structure==== | ||
| Line 30: | Line 31: | ||
|--hw_intfc.conf | |--hw_intfc.conf | ||
|--overlays | |--overlays | ||
| − | + | |--at24c02.dtbo | |
| − | + | |--console-on-ttyS2.dtbo | |
| − | + | |--console-on-ttyS4.dtbo | |
| − | + | |--cpufreq.dtbo | |
| − | + | |--devspi1.dtbo | |
| − | + | |--devspi2.dtbo | |
| − | + | |--hifiberry-dac.dtbo | |
| + | |--hifiberry-dacplus.dtbo | ||
| + | |--imx219.dtbo | ||
| + | |--ov5647.dtbo | ||
| + | |--pcie-gen2.dtbo | ||
| + | |--raspberrypi-7-inch-lcd.dtbo | ||
| + | |--spi1-flash.dtbo | ||
| + | |--spi1-waveshare35b-v2.dtbo | ||
| + | |--spi1-waveshare35c.dtbo | ||
| + | |--two-color-led.dtbo | ||
| + | |--w1-gpio4-30.dtbo | ||
====Using Overlays==== | ====Using Overlays==== | ||
| Line 152: | Line 163: | ||
Name: devspi1 | Name: devspi1 | ||
| − | Info: Overlay for activation of dummy spi device on SPI1 for | + | Info: Overlay for activation of dummy spi device on SPI1 for userspace |
| + | access such as libmraa. | ||
Need set: intfc:spi1=on | Need set: intfc:spi1=on | ||
By default, spi1 is disabled. | By default, spi1 is disabled. | ||
| Line 159: | Line 171: | ||
Name: devspi2 | Name: devspi2 | ||
| − | Info: Overlay for activation of dummy spi device on SPI2 for | + | Info: Overlay for activation of dummy spi device on SPI2 for userspace |
| − | Need | + | access such as libmraa. |
| + | Need setting: intfc:spi2=on | ||
When use spi2. i2c6 must be disabled. | When use spi2. i2c6 must be disabled. | ||
Load: intfc:dtoverlay=devspi2 | Load: intfc:dtoverlay=devspi2 | ||
| Line 170: | Line 183: | ||
Name: spi1-waveshare35b-v2 | Name: spi1-waveshare35b-v2 | ||
Info: Overlay for activation of waveshare 3.5inch lcd(B v2). | Info: Overlay for activation of waveshare 3.5inch lcd(B v2). | ||
| − | Need | + | Need setting: intfc:uart4=off intfc:spi1=on |
Load: intfc:dtoverlay=spi1-0waveshare35b-v2 | Load: intfc:dtoverlay=spi1-0waveshare35b-v2 | ||
Name: spi1-waveshare35c | Name: spi1-waveshare35c | ||
Info: Overlay for activation of waveshare 3.5inch lcd(C). | Info: Overlay for activation of waveshare 3.5inch lcd(C). | ||
| − | Need | + | Need setting: intfc:uart4=off intfc:spi1=on |
Load: intfc:dtoverlay=spi1-waveshare35c | Load: intfc:dtoverlay=spi1-waveshare35c | ||
| + | |||
| + | Name: spi1-flash | ||
| + | Info: Overlay for activation of spi flash. | ||
| + | Need setting: intfc:uart4=off intfc:spi1=on | ||
| + | Load: intfc:dtoverlay=spi1-flash | ||
| + | |||
| + | Name: hifiberry-dac | ||
| + | Info: Overlay for activation of hifiberry dac. | ||
| + | Need setting: intfc:i2c7=on | ||
| + | Load: intfc:dtoverlay=hifiberry-dac | ||
| + | |||
| + | Name: hifiberry-dacplus | ||
| + | Info: Overlay for activation of hifiberry dac plus | ||
| + | Load: intfc:dtoverlay=hifiberry-dacplus | ||
| + | |||
| + | Name: raspberrypi-7-inch-lcd | ||
| + | Info: Overlay for activation of raspberry pi official 7 inch LCD | ||
| + | Load: intfc:dtoverlay=raspberrypi-7-inch-lcd | ||
| + | |||
| + | Name: cpufreq | ||
| + | Info: Overlay for activation of setting cpu frequency over-2GHz | ||
| + | Load: intfc:dtoverlay=cpufreq | ||
| + | |||
| + | Name: imx219 | ||
| + | Info: Overlay for activation of imx219 camera module. | ||
| + | Need to disable ov5647 camera module. | ||
| + | Load: intfc:dtoverlay=imx219 | ||
| + | |||
| + | Name: ov5647 | ||
| + | Info: Overlay for activation of ov5647 camera module. | ||
| + | Need to disable imx219 camera module. | ||
| + | Load: intfc:dtoverlay=ov5647 | ||
| + | |||
| + | Name: w1-gpio4-30 | ||
| + | Info: Overlay for activation of 1-wire on GPIO4_D6 for devices | ||
| + | such as DS18B20. | ||
| + | Load: intfc:dtoverlay=w1-gpio4-30 | ||
| + | |||
| + | =====Example for 1-wire communication: DS18B20===== | ||
| + | |||
| + | After adding w1-gpio4-30.dtbo file and reboot the machine, you need to load the driver modules, w1-gpio and w1-therm. | ||
| + | |||
| + | $ sudo modprobe w1-gpio | ||
| + | $ sudo modprobe w1-therm | ||
| + | |||
| + | Check sensor | ||
| + | |||
| + | $ cd /sys/bus/w1/devices | ||
| + | 28-00000b061653 w1_bus_master1 | ||
| + | |||
| + | Get current temperature | ||
| + | |||
| + | $ cat ./28-00000b061653/w1_slave | ||
| + | cb 01 4b 46 7f ff 05 10 73 : crc=73 YES | ||
| + | cb 01 4b 46 7f ff 05 10 73 t=28687 | ||
| + | |||
| + | It shows that the temperature is 28.687 degrees Celsius. | ||
====Installing ROCK Pi 4 dtbo package ==== | ====Installing ROCK Pi 4 dtbo package ==== | ||
| + | |||
| + | '''Attention!''' If you use a 5.10 kernel, please refer to [https://wiki.radxa.com/Rockpi4/dev/common-interface-with-kernel-5.10 Common interface with Kernel 5.10] | ||
Radxa APT provides rockpi4-dtbo package that includes hw_intfc.conf and .dtbo files. To use it, do: | Radxa APT provides rockpi4-dtbo package that includes hw_intfc.conf and .dtbo files. To use it, do: | ||
$ sudo apt-get update | $ sudo apt-get update | ||
| − | |||
$ sudo apt-get install rockpi4-dtbo | $ sudo apt-get install rockpi4-dtbo | ||
Latest revision as of 06:21, 6 December 2022
ROCK Pi 4 > Hardware > Device Tree Overlays Linux 4.4
Contents
Device Tree Overlays
Introduction
This directory contains Device Tree overlays. Device Tree makes it possible to support many hardware configurations with a single kernel and without the need to explicitly load or blacklisr kernel modules.
On Rock Pi, you will find a rockpi-4b-linux.dtb in /boot. This describes the hardware that is part of the Rock Pi board. The loader selects the .dtb file appropriate for the platform by name and pass it to the kernel.
Device Tree Overlays usage is controlled from /boot/hw_intfc.conf. You can do the settings for Rock Pi in your hw_intfc.conf, which should cause your Rock Pi to do your wanted things after a reboot.
In /boot/overlays you will find many .dtbo files. The loader will merge the selected .dtbo files by reading file /boot/hw_intfc.conf.
File hw_intfc.conf also can be found in [SDK rockchip-bsp] directory, rockchip-bsp/kernel/arch/arm64/boot/dts/rockchip/overlays/
File Structure
/boot
|--rockpi-4b-linux.dtb
|--hw_intfc.conf
|--overlays
|--at24c02.dtbo
|--console-on-ttyS2.dtbo
|--console-on-ttyS4.dtbo
|--cpufreq.dtbo
|--devspi1.dtbo
|--devspi2.dtbo
|--hifiberry-dac.dtbo
|--hifiberry-dacplus.dtbo
|--imx219.dtbo
|--ov5647.dtbo
|--pcie-gen2.dtbo
|--raspberrypi-7-inch-lcd.dtbo
|--spi1-flash.dtbo
|--spi1-waveshare35b-v2.dtbo
|--spi1-waveshare35c.dtbo
|--two-color-led.dtbo
|--w1-gpio4-30.dtbo
Using Overlays
Overlays are loaded using "intfc:" directive. As an example, consider the at24c02 module. Add one line in hw_intfc.conf:
intfc:dtoverlay=at24c02
This causes the file /boot/overlays/at24c02.dtbo to be loaded.
The Overlay and Parameter Reference
N.B. It is recommended to only ebable those bus interfaces that are needed. Leaving all interfaces enabled can lead to unwanted behaviour.
Seeing 40-pin GPIO connector , we find that UART4 and SPI1 share some pins, and I2C6 and SPI2 share some pins.
In order to solve the problem of pin conflicts, we make a convention.
When we set UART4 and SPI1 to "on" at the same, the system will forcibly set UART4 to "on" and SPI1 to "off" (Although you see SPI1 is “on” on file hw_intfc.conf,).
When we set I2C6 and SPI2 to "on" at the same time, the system will forcibly set I2C6 to "on" and SPI2 to "off".
Enabling and disabling BUS
Name: pwm0 Info: Overlay for BUS PWM0 Load: intfc:pwm0=<value> Value: on Set to "on" to enable the pwm0 interface (default "off") off Set to "off" to disable the pwm0 interface Name: pwm1 Info: Overlay for BUS PWM1 Load: intfc:pwm1=<value> Value: on Set to "on" to enable the pwm1 interface (default "off") off Set to "off" to disable the pwm2 interface Name: uart2 Info: Overlay for BUS UART2 Load: intfc:uart2=<value> Value: on Set to "on" to enable the uart2 interface (default "off") off Set to "off" to disable the uart2 interface Name: uart4 Info: Overlay for BUS UART4 Load: intfc:uart4=<value> Value: on Set to "on" to enable the uart4 interface (default "off") off Set to "off" to disable the uart4 interface Name: spi1 Info: Overlay for BUS SPI1 Load: intfc:spi1=<value> Value: on Set to "on" to enable the spi1 interface (default "off") off Set to "off" to disable the spi1 interface Name: spi2 Info: Overlay for BUS SPI2 Load: intfc:spi2=<value> Value: on Set to "on" to enable the spi2 interface (default "off") off Set to "off" to disable the spi2 interface Name: i2c2 Info: Overlay for BUS I2C2 Load: intfc:i2c2=<value> Value: on Set to "on" to enable the i2c2 interface (default "off") off Set to "off" to disable the i2c2 interface Name: i2c6 Info: Overlay for BUS I2C6 Load: intfc:i2c6=<value> Value: on Set to "on" to enable the i2c6 interface (default "off") off Set to "off" to disable the i2c6 interface Name: i2c7 Info: Overlay for BUS I2C7 Load: intfc:i2c7=<value> Value: on Set to "on" to enable the i2c7 interface (default "off") off Set to "off" to disable the i2c7 interface
Loading hardware module
Name: at24c02 Info: Overlay for activation of EEPROM AT24C02 over I2C2. Load: intfc:dtoverlay=at24c02 Name: two-color-led Info: Overlay for activation of ALLNET 4duino B10/B11 two-coloe-led module on 40-pin Header Pin#35 and Pin#36 Load: intfc:dtoverlay=two-color-led Name: console-on-ttyS2 Info: By default, fiq debugger console is disabled. When this dtbo file is loaded, Rock Pi enables fiq debugger console. ttyS2 Pins will output console information. At the same time, it is recommended that you set UART2 to off in file /boot/hw_intfc.conf and do not load console-on-ttyS4.dtbo file. Load: intfc:dtoverlay=console-on-ttyS2 Name: console-on-ttyS4 Info: By default, fiq debugger console is disabled. When this dtbo file is loaded, Rock Pi enables fiq debugger console. ttyS4 Pins will output console information. At the same time, it is recommended that you set UART4 to off in file /boot/hw_intfc.conf and do not load console-on-ttyS2.dtbo file. Load: intfc:dtoverlay=console-on-ttyS4 Name: devspi1 Info: Overlay for activation of dummy spi device on SPI1 for userspace access such as libmraa. Need set: intfc:spi1=on By default, spi1 is disabled. when use spi1, uart4 must be disabled. Load: intfc:dtoverlay=devspi1 Name: devspi2 Info: Overlay for activation of dummy spi device on SPI2 for userspace access such as libmraa. Need setting: intfc:spi2=on When use spi2. i2c6 must be disabled. Load: intfc:dtoverlay=devspi2 Name: pcie-gen2 Info: Overlay for activation of pcie running on GEN2 mode. Load: intfc:dtoverlay=pcie-gen2 Name: spi1-waveshare35b-v2 Info: Overlay for activation of waveshare 3.5inch lcd(B v2). Need setting: intfc:uart4=off intfc:spi1=on Load: intfc:dtoverlay=spi1-0waveshare35b-v2 Name: spi1-waveshare35c Info: Overlay for activation of waveshare 3.5inch lcd(C). Need setting: intfc:uart4=off intfc:spi1=on Load: intfc:dtoverlay=spi1-waveshare35c Name: spi1-flash Info: Overlay for activation of spi flash. Need setting: intfc:uart4=off intfc:spi1=on Load: intfc:dtoverlay=spi1-flash Name: hifiberry-dac Info: Overlay for activation of hifiberry dac. Need setting: intfc:i2c7=on Load: intfc:dtoverlay=hifiberry-dac Name: hifiberry-dacplus Info: Overlay for activation of hifiberry dac plus Load: intfc:dtoverlay=hifiberry-dacplus Name: raspberrypi-7-inch-lcd Info: Overlay for activation of raspberry pi official 7 inch LCD Load: intfc:dtoverlay=raspberrypi-7-inch-lcd Name: cpufreq Info: Overlay for activation of setting cpu frequency over-2GHz Load: intfc:dtoverlay=cpufreq Name: imx219 Info: Overlay for activation of imx219 camera module. Need to disable ov5647 camera module. Load: intfc:dtoverlay=imx219 Name: ov5647 Info: Overlay for activation of ov5647 camera module. Need to disable imx219 camera module. Load: intfc:dtoverlay=ov5647 Name: w1-gpio4-30 Info: Overlay for activation of 1-wire on GPIO4_D6 for devices such as DS18B20. Load: intfc:dtoverlay=w1-gpio4-30
Example for 1-wire communication: DS18B20
After adding w1-gpio4-30.dtbo file and reboot the machine, you need to load the driver modules, w1-gpio and w1-therm.
$ sudo modprobe w1-gpio $ sudo modprobe w1-therm
Check sensor
$ cd /sys/bus/w1/devices 28-00000b061653 w1_bus_master1
Get current temperature
$ cat ./28-00000b061653/w1_slave cb 01 4b 46 7f ff 05 10 73 : crc=73 YES cb 01 4b 46 7f ff 05 10 73 t=28687
It shows that the temperature is 28.687 degrees Celsius.
Installing ROCK Pi 4 dtbo package
Attention! If you use a 5.10 kernel, please refer to Common interface with Kernel 5.10
Radxa APT provides rockpi4-dtbo package that includes hw_intfc.conf and .dtbo files. To use it, do:
$ sudo apt-get update $ sudo apt-get install rockpi4-dtbo