Difference between revisions of "Zero/install/eMMC erase"
(→How to erase eMMC) |
RadxaYuntian (Talk | contribs) |
||
| Line 17: | Line 17: | ||
== How to == | == How to == | ||
| − | Follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load [https://dl.radxa.com/zero/images/loader/radxa-zero-erase-emmc.bin radxa-zero-erase-emmc.bin] or [https://dl.radxa.com/ | + | Follow [[Zero/dev/maskrom#Enable_maskrom | maskrom guide]] to setup and load [https://dl.radxa.com/zero/images/loader/radxa-zero-erase-emmc.bin radxa-zero-erase-emmc.bin] or [https://dl.radxa.com/zero2pro/images/loader/radxa-zero-2pro-erase-emmc.bin radxa-zero-2pro-erase-emmc.bin]: |
[[File:Rz-usb-helper-fastboot.png | 500px]] | [[File:Rz-usb-helper-fastboot.png | 500px]] | ||
Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device. | Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device. | ||
Latest revision as of 07:43, 29 November 2023
Radxa Zero > Installation > Erase eMMC
How to erase eMMC
This guide describes how to erase Radxa Zero series eMMC for installing a new system. Beware that this is not a secure erase, and only the bootloader and the partition header are wiped.
For more detailed guide on wiping eMMC (or if this fails), please refer to Boot Troubleshooting page.
Requirement
- Radxa Zero or Radxa Zero 2
- A PC/laptop running Windows, Linux, or macOS
- USB A to C cable or C to C cable, depending on your host
How to
Follow maskrom guide to setup and load radxa-zero-erase-emmc.bin or radxa-zero-2pro-erase-emmc.bin:
Once your computer detects a new USB storage device, your eMMC will be wiped and you can flash to this newly found USB device.